







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Sonoma, CA
We provide independent Mr-Glass service across Sonoma, from window replacement and impact glazing to full kitchen remodeling. What sets our Mr-Glass work here apart is that most jobs touch two code worlds at once: a window on a Plaza-area building may need historic-preservation review, while the same property can fall inside a Wildland-Urban Interface ignition-resistant zone. Our technicians have up to 19 years of experience, and we quote a written price before any work starts. Call (833) 842-1866 for a free estimate.
Why Sonoma Residents Choose Us for Mr-Glass Service

We know the Mr-Glass catalog line by line: 4000 Series aluminum, 6000 Series vinyl, 8000 Series wood-clad, and 9000 Series multi-slide doors. We also know how each one behaves after ten summers west of the Plaza. Sonoma’s combination of intense dry-season sun and wet winters is hard on dual-pane units and on the hardware that holds them, so a straight replacement recommendation is often the honest one and sometimes isn’t.
OEM parts come first when a line is still made, because exact-fit sashes and hardware keep a unit’s rating intact. For discontinued lines we use aftermarket components that meet or exceed original specifications, and we tell you which we’re using. We pull the permits the work requires and keep a documented photo record on every visit.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Solve in Sonoma
- Seal failure and fogging in dual-pane units. Thermal stress from Sonoma’s hot, dry late summers followed by cold, wet winter rains breaks down the perimeter seal, and moisture collects between the panes. Once that happens the insulating gas is gone and the glass needs to be replaced, not wiped clean.
- Frame distortion in vinyl windows. The 6000 Series holds up well in most spots, but on unshaded west- and north-facing walls it takes the worst of the afternoon sun. We see warping and sticking most where there’s no shade and the WUI zone discourages planting close to the wall.
- Ember intrusion through weep holes and perimeter gaps. Older Mr-Glass installations in the hills were often sealed to the standard of their day. Chapter 7A expects ignition-resistant venting and a sealed perimeter, and inspectors check it.
- Hardware and fastener corrosion. Coastal-influenced air and the ash residue a fire season leaves behind attack hinges, rollers, and screws. Sticking sliders and leaky thresholds usually trace back to this.
- Historic-pattern mismatch on older homes. A replacement that ignores the original divided-light profile creates a review problem even when the glass itself is better. We match the pattern first and improve the glass second.
Mr-Glass Service in Sonoma: What Local Conditions Mean for Your Equipment

Historic preservation review near Sonoma Plaza regularly requires that replacement windows keep the original divided-light patterns and sash profiles, even when the point of the job is upgrading to energy-efficient glass. That constraint is unusual. Most neighboring towns have no design review to satisfy, so a pro can swap a window for whatever performs best and move on. In Sonoma, the elevation drawing matters as much as the U-factor. A Mr-Glass 8000 Series wood-clad unit can match an original profile while delivering modern glass, which is often the path of least resistance through review.
Meanwhile, parcels in the hills west and north of town sit inside the WUI, where Chapter 7A asks for Class A assemblies and ember-resistant vents. A mid-century ranch west of Sonoma with sticky, fogged 6000 Series units usually needs new glazing that satisfies both realities at once: a compliant profile on the front elevation, an ignition-resistant assembly on the frame and vents, and flashing done right so the next wet winter doesn’t find a way in.
Mr-Glass Models & Products We Service in Sonoma
We work on the 4000 Series aluminum line, the 6000 Series vinyl line, the 8000 Series wood-clad line, and 9000 Series multi-slide doors, including older units from lines that have since been discontinued. When a model is still in production, we source OEM parts so the sash and hardware fit exactly as designed and the unit keeps its performance rating. When it isn’t, we use aftermarket components that meet or exceed the original spec and explain the difference before ordering. We don’t claim local stock; parts are sourced per job, which shapes the timeline and we’ll tell you honestly whether a repair is worth the wait or replacement is the better spend.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Sonoma

Window work in Sonoma runs higher than in towns without design review and WUI requirements, because compliance takes time. These ranges reflect the Sonoma market and are the numbers we quote from.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
What drives the number: the unit count, the glass spec, whether historic-review documentation is required, and how much framing and flashing the openings need once we’re in. A free estimate here means a written, line-item price and scope before anything gets ordered, plus a written warranty. Call (833) 842-1866 to schedule yours.
Serving Sonoma, CA – Our Local Coverage Area
We serve Sonoma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Sonoma
Yes. We install replacement assemblies built to Chapter 7A with ember-resistant vents, enclosed eaves where they apply, and sealed perimeters, and we handle the permit and inspection side. The specific assembly depends on the parcel’s WUI designation, which we confirm before quoting.
Fogging means the seal has failed and the insulating gas is gone, so in most cases the affected glass units need replacing; the frame itself is often reusable if it hasn’t warped. We check hardware and frame condition before recommending anything, since a sash or glass swap is far less than a full unit. Call (833) 842-1866 and we’ll tell you which side of that line your windows fall on.
Likely yes. Properties within the Plaza historic district typically go through preservation or design review, and approval turns on matching the original divided-light pattern and profile. We prepare the documentation with you rather than dropping a permit application and hoping.
The repeated cycle of dry heat and wet cold is what shortens the life of dual-pane seals and stresses vinyl frames on unshaded walls. Proper flashing and perimeter sealing are what get a unit through both seasons intact.
Yes, with the right spec. Rural parcels often carry both WUI requirements and agricultural-preserve rules that shape what can be built, so we size and locate units around what’s permitted on that land. For a written scope on your estate, call (833) 842-1866; estimates are free.
Service Areas Near Sonoma
We serve Sonoma and the towns around it, including Santa Rosa, Rohnert Park, and Petaluma to the west, plus Napa over the hills to the east. Work across the Sonoma Valley is handled through our Sonoma service area, and the wider region falls under our Mr-Glass service.
Book Your Mr-Glass Service in Sonoma Today
If your windows are fogging, sticking, or due for a Chapter 7A upgrade, call (833) 842-1866. A live person answers around the clock, and we’ll schedule a free estimate with a written price and scope before any work begins. Estimates are free, and the quote is yours to compare line by line.
Written by the team at Rowan Construction Group Santa Rosa.












