







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Santa Rosa
If you’re pricing a fence in Santa Rosa, the honest answer is that a typical wood or vinyl install runs $3,500 to $9,000 depending on linear footage, material and how much repair the existing line needs. We give you that number in writing before anyone orders a stick of lumber. That matters here more than in most cities, because fence work in Santa Rosa now runs through fire-hardening review, property-line records and post-fire code cycles that don’t always match from one lot to the next. Call (833) 842-1866 and we’ll walk your fence line with you.
Why Rowan Construction Group Santa Rosa Is Santa Rosa’s Preferred Fence Installation Company

We’re a construction contractor first, and that shows in how fence jobs get handled here. Every fence quote is a flat written price with a written scope and a written warranty, delivered before work starts. Under Clause 1 of the Haven Standard, the price goes on paper first; that’s the whole point of the system, not a slogan. No change proceeds until a change order is signed, which is why our projects land within a few percent of the number the customer agreed to.
Fence work in Santa Rosa has a specific set of conditions we know well: the wildland-urban interface rules from Chapter 7A, the defensible-space planning, the Building Division’s rebuild-permit backlog that still shapes how fast anything gets reviewed. Our technicians have up to 19 years of experience, and they’re background-checked and uniformed, arriving with a live person answering the phones at any hour. Every visit includes a documented photo record as a standard deliverable. You get the images of what was found and what was installed, not a verbal summary. We also offer a free second opinion on any written estimate you’ve already received, reviewed line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Santa Rosa
Wood Fence
Wood is still the default for most Santa Rosa yards, and for good reason: it’s repairable, it can be stained to match existing fencing, and it works with the mid-century ranch stock in Coffey Park and Roseland. But if your property line falls inside the defensible-space zone, standard cedar may not pass fire-hardening review. We specify the material to the parcel before we order it, so you’re not eating a change order after the panels arrive.

Aluminum Fence
Aluminum runs $4,000 to $10,000 in Santa Rosa for a typical residential run. It’s noncombustible, which makes it a practical choice on wildland-interface lots in Fountaingrove and Rincon Valley where ember-resistant detailing is a standing requirement. Powder-coated finishes hold up to the dry-season UV without the annual restaining a wood fence demands.

Privacy Fence
Six-foot and taller privacy runs are where post depth and spacing actually matter. On the slopes common to Rincon Valley, a fence set at standard depth will rack and lean within one Diablo-wind season. We set posts below wind-load depth with proper footing and spacing, then coordinate the scope against the property-line record so the fence doesn’t cross a boundary you didn’t know about.

Vinyl Fence
Vinyl fence installation in Santa Rosa runs $3,500 to $9,000 for most residential jobs. It handles the dry summers and wet winters without the maintenance cycle wood needs, and it’s a clean match for the newer rebuilds in Coffey Park. We’ll tell you honestly when vinyl makes sense and when the grade or the wind exposure makes a different material the better call.
We also handle chain link, iron, fence repair, fence gates and commercial fencing across Santa Rosa. If you want the full range of what our Fence Installation team covers, that page lays it out.
Trusted Brands We Service in Santa Rosa
Hardware selection on a fence is where a quote quietly inflates or quietly fails. We work with fittings and finish components from Schluter and Sterling where the spec calls for them, and we quote them by name in the written scope so you can compare apples to apples against another bid. We don’t stock parts locally and we don’t pretend to; what we do is source through more than fifty vetted brands and give you an honest lead time rather than an optimistic one. On architectural and privacy builds, that sourcing depth is what keeps the written number from ballooning once material is actually ordered.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Santa Rosa Homes
- Combustible material ordered for a defensible-space fence. Standard cedar or wood panels get quoted for a line that sits inside the WUI zone, then fail fire-hardening review. The homeowner eats the change order because nobody checked the parcel’s requirements before ordering.
- Posts set too shallow on a slope. On Fountaingrove and Rincon Valley hillside lots, standard depth and spacing lets Diablo-wind gusts rack and lean the whole run within a single season. Proper footing depth is the fix, and it has to happen before the panels go up.
- No property-line record pulled for a post-2017 rebuild. A lot rebuilt in 2018 next to an original 1960s parcel can carry two different setback realities. Without the record, the fence crosses a boundary or violates a code cycle nobody accounted for.
- Fire-hardening detailing skipped at the gate and hardware. The panels get specified correctly but the gate, hinges and fasteners don’t, so the one component most exposed to embers is the one that fails inspection.
Pricing for Fence Installation in Santa Rosa, CA

Our lead range for fence work in Santa Rosa is $3,500 to $9,000. Where you land inside that depends on linear footage, material, gate count, and how much of the existing line has to come out. Sloped lots in Rincon Valley and Fountaingrove cost more because footing depth and spacing go deeper and the posts are heavier work. Wildland-interface jobs that require noncombustible or fire-rated material land toward the top of the range. Here’s how the two most common materials price out:
| Fence Type | Typical Installed Range in Santa Rosa |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
Free estimate, and a written price before any material is ordered. If you’ve already got a bid from another installer, bring it in for a free second opinion and we’ll review it line by line.
We Also Serve Cities Near Santa Rosa
We take fence work across the surrounding Sonoma County area, including Rohnert Park, Petaluma, Sonoma and Novato. If you’re just outside Santa Rosa and want to confirm coverage, see our Santa Rosa page or call us and we’ll tell you straight. The wildland-interface rules shift as you cross city lines, so we check the parcel wherever you are.
Serving Santa Rosa, CA – Our Local Coverage Area
We serve Santa Rosa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Santa Rosa

It depends on whether your property line falls inside the defensible-space zone, and that’s a parcel-by-parcel question. A fence inside the WUI zone generally needs noncombustible or fire-rated material and ember-resistant detailing to clear fire-hardening review. Standard cedar will fail that review, which is why we check the parcel before quoting. Call (833) 842-1866 and we’ll help you determine which side of the line your fence sits on.
Lead time, not labor, sets the calendar on most fence jobs here. Specialty and fire-rated materials are made to spec, so ordering them takes weeks before a single post goes in the ground, and the Building Division’s review adds its own window. A written schedule before ordering is what keeps the project honest. Call us for a lead-time estimate tied to your specific material and parcel.
Yes, and it’s the most common fence-line problem we see in Coffey Park and Fountaingrove. A 2018 WUI-compliant rebuild next to an original 1960s ranch can carry two different fire-hardening and setback realities along the same fence line, so a fence that satisfies one parcel’s requirements may not satisfy the neighbor’s. We pull both property-line records and coordinate the scope against both code cycles before ordering. Call us and we’ll walk through what that means on your specific lot.
Spring and early summer is the window we schedule for exterior work here, before the bone-dry summer and the gusty Diablo winds of autumn arrive. That timing lets the posts set and the material cure before fire season and gives any permit review room to clear. Fall installs are possible but tighter on the schedule. Call (833) 842-1866 to get on the calendar early.
You should have a flat written price, a written scope with material names, a written warranty, and the parcel’s fire-hardening and setback requirements documented before anyone orders. No change should proceed without a signed change order. That’s the discipline that keeps a fence project within a few percent of the agreed price. Call us for a free written estimate and a second opinion on any bid you’ve already got.
Ready to put a number on your fence line? Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. We’ll walk the property, check the parcel’s requirements, and hand you a written price with a written scope before any material is ordered – and back it with our 365-Day Done Right Promise.
Written by the team at Rowan Construction Group.












