







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Mr-Glass Construction
Rowan Construction Group provides independent Mr-Glass construction service in Santa Rosa: we repair, replace and install the frameless sliding shower doors, semi-frameless bi-pass and bi-fold enclosures, custom mirrors and glass railing systems that Mr-Glass makes. What sets our Mr-Glass work apart is where we start. Most failed units we see in Santa Rosa aren’t failed glass. They’re worn rollers, seized pivots, hardened sweeps and out-of-square openings – hardware and framing problems we can usually solve without replacing a sound panel.
We are an independent Mr-Glass service provider. Rowan Construction Group is not affiliated with, authorized by, sponsored by or endorsed by Mr-Glass, and we don’t imply otherwise. That independence is useful to you: we’re free to specify the glass thickness, framing profile and hardware that fit your opening and your budget rather than a factory-mandated package. Our technicians have up to 19 years of experience, and we serve homeowners across Santa Rosa – Coffey Park, Fountaingrove, Rincon Valley, Roseland and the older stock around Railroad Square. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your Mr-Glass Construction?

Our technicians know the Mr-Glass product families by their hardware, not just their look. Frameless barn-door sliders ride on top-hung roller carriages; single-pivot doors hang on a bottom pivot and a top guide; semi-frameless bi-pass units track on bottom rollers with a guide rail above. Each fails differently, and knowing which one you have changes the parts you order and the way you re-hang the panel.
Warranty-safe service matters here. We work with OEM Mr-Glass replacement rollers, pivots, sweeps and seals when the original profile is still available, and we use a matched aftermarket equivalent only when it isn’t – never a generic part forced to fit. We don’t claim local Mr-Glass stock; parts are sourced per job to the correct profile. Every visit includes a documented photo record as a standard deliverable, and a live person answers our calls 24/7. Under Clause 1 of the Haven Standard, you get a written price before any work starts – always. Call (833) 842-1866 to schedule your free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Santa Rosa
- Seized rollers and pivots on frameless sliding shower doors. Hard-water mineral buildup in Santa Rosa’s water coats roller carriages and pivot pins until they bind. The panel starts to jump its track or drag, and most owners assume the door is finished. Usually it’s the hardware, not the glass.
- Hardened, shrunken sweeps and seals on semi-frameless enclosures. Factory sweeps are rubber or vinyl; they harden with age and heat, shrink back from the glass edge, and let water escape onto bathroom flooring. Adjacent trim and subfloor swell before anyone notices the source.
- Edge chipping and spot-delamination near mounting clamps. Tempered glass panels chip at the edge or spot-delaminate where installers over-tightened clamp hardware. The clamp crushes the glass at the hole; a hairline crack follows. This is one failure where replacement, not repair, is the honest answer.
- Out-of-square rough openings causing misaligned panels. Santa Rosa’s older bathrooms – especially pre-1950 craftsman and Victorian stock near Railroad Square and the JC neighborhood – rarely have square openings. A panel hung in an out-of-square opening scrapes the frame or leaves uneven gaps no sweep can close.
- Bent top rails and distorted frames on bi-pass units. Semi-frameless bi-pass enclosures carry load through a light top rail. When the rail bends or the wall anchors loosen, both panels ride crooked and the enclosure never closes flush again.
Mr-Glass Parts & Our Repair-vs-Replace Approach

Most Mr-Glass failures are hardware and sealing, not glass. That’s the whole logic of our approach. When the original profile is still available, we use OEM Mr-Glass replacement rollers, pivots, sweeps and seals; when it’s been discontinued, we match a quality aftermarket equivalent to the correct profile rather than forcing a generic part. We don’t claim local Mr-Glass stock – parts are sourced per job to fit your unit.
Repair is usually the right call on a sound panel: replace the rollers and seals, check plumb and square, re-hang. Replacement is the honest answer when the glass is chipped at an edge, spot-delaminated at a clamp, or the frame itself is bent. We tell you which, in writing, before anything is ordered.
Call (833) 842-1866 for a free estimate and a written scope – no work starts until you’ve seen the number.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We identify your exact Mr-Glass unit – frameless barn-door slider, single-pivot door, semi-frameless bi-pass or bi-fold – then check the hardware, the glass edges, the seals, and the plumb and square of the opening.
- 2
Written scope and price. You get a flat written price and a written scope before work starts. If repair is the right call, we say so; if replacement is, we say that too, in writing.
- 3
Repair or install. OEM or matched parts installed to the correct profile; new panels set and shimmed to a plumb, square opening; clamps torqued to spec to avoid edge chipping.
- 4
Test and warranty. We cycle the door or enclosure, check for water escape and clean operation, and leave you a documented photo record and a written warranty. The 365-Day Done Right Promise backs the work.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Santa Rosa
We cover the Mr-Glass lines Santa Rosa homeowners actually own: frameless sliding shower door systems in barn-door and single-pivot configurations; semi-frameless bi-pass and bi-fold shower enclosures; custom-cut mirrors and mirrored closet and wardrobe door sets; and glass railing and stair-panel systems for decks and interior stairs. Our emphasis on this page is the shower side – frameless glass shower enclosures, walk-in shower installation, and walk-in shower and shower remodeling – where hardware wear and water sealing cause the most trouble. If you’re unsure which series you have, send us a photo and we’ll identify it.
We Also Service These Brands
Mr-Glass is one part of what we handle. Rowan Construction Group Santa Rosa works across kitchen, bath, roofing, windows and doors, fencing, driveway and paver, and addition trades – and we service other brands alongside Mr-Glass, including KraftMaid, Cambria, Silestone and Kohler. You’re not locked into a single-brand contractor. One call covers the bath, the counter and the surrounding work.
FAQs – Mr-Glass Construction Service in Santa Rosa

A pro can almost always fix the hardware without replacing the enclosure. Worn rollers, seized pivots, hardened sweeps and a bent top rail are all replaceable while the glass stays. Full-unit replacement is the right call only when the glass is chipped at an edge, spot-delaminated at a clamp, or the frame is distorted. Call (833) 842-1866 for a free estimate – we’ll tell you which path is honest before anything is ordered.
Yes. Santa Rosa’s hard water leaves mineral deposits that coat roller carriages and pivot pins until they seize. That’s the most common reason a Mr-Glass frameless slider starts to drag or jump its track. The fix is cleaning and replacing the affected hardware, not a new door.
Yes. We can source custom-cut Mr-Glass panels for odd or out-of-square openings, including older Santa Rosa bathrooms where the rough opening isn’t square. We measure first, then order to fit – not the other way around.
No. Rowan Construction Group Santa Rosa is an independent Mr-Glass service provider, not affiliated with, authorized by, sponsored by or endorsed by Mr-Glass. That independence lets us specify the glass, framing and hardware that actually fit your opening and budget. Call (833) 842-1866 for a free estimate.
Frameless glass shower enclosure and walk-in shower installation runs $4,500 – $12,000. Tub-to-shower conversion is $3,500 – $10,000, shower replacement is $3,000 – $8,500, and a full bathroom remodel is $9,000 – $28,000. These are market ranges; your written price depends on the opening, the glass and the hardware. Call (833) 842-1866 for an exact quote – estimates are free.
Budget $4,500 – $12,000 for a Mr-Glass frameless glass walk-in shower, with the number driven by glass size, hardware and whether the opening needs squaring. A tub-to-shower conversion for the same bathroom runs $3,500 – $10,000. Call (833) 842-1866 for a written, line-item price before any work starts.
Book Your Mr-Glass Service in Santa Rosa, CA
Whether it’s a dragging Mr-Glass slider, a leaking enclosure or a custom walk-in upgrade, Rowan Construction Group Santa Rosa gives you a written price before anyone picks up a tool. Call (833) 842-1866 for a free estimate. We’re an independent Mr-Glass service provider – not affiliated with or authorized by Mr-Glass – and we’ll tell you honestly whether repair or replacement is the right call. Estimates are free. Get the written number first.
Written by the team at Rowan Construction Group Santa Rosa.












