







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Santa Rosa Owner’s Guide
We install and replace Unilock windows and doors across Santa Rosa, and typical installed pricing runs $4,500 – $15,000 for a window replacement project and $8,000 – $25,000 for impact-rated window installation, quoted as a flat written price before any work begins. A window or door rarely fails all at once. Santa Rosa owners usually notice it in stages: a sash that drags instead of gliding, condensation trapped between panes by midmorning, a draft along the frame during a cool Bennett Valley evening, or a door that no longer latches square because the frame has shifted. What starts as a small annoyance in a 1960s or 1990s home becomes a call once the glass seals fog or the frame stops holding weather out. Rowan Construction Group Santa Rosa is an independent service provider and is not affiliated with Unilock.
Which Unilock Models This Applies To
Unilock has produced several window and door lines over the years, and the part you need is tied to the series, not just the opening size. Before we order anything, we identify the unit by its label: a manufacturer’s sticker on the jamb or sash typically lists the series, glazing type, and a date or batch code. When the label is gone, we measure the rough opening and the visible glass dimension separately, because a replacement sash is matched to the frame, not the hole in the wall. This is where a common gotcha shows up in Santa Rosa: a 1990s Unilock vinyl unit and a contemporary line may share a nominal size but differ in frame depth and weatherstripping profile, so the sash that looks right online won’t seat correctly. For Unilock specifically, we lean toward OEM-compatible components where the series is still supported and a matched aftermarket equivalent where it isn’t, and we tell you which way we went and why. We also service KraftMaid, Cambria, and Silestone on other parts of the home.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
Most failures announce themselves before the glass cracks. Here’s what we look for, and what each symptom means.
- Fogging or condensation between the panes. The sealed insulating glass unit has lost its gas seal. In Santa Rosa’s dry summers and damp winters, that cycling is hard on seals, and once moisture is inside, the unit won’t clear.
- A sash that drags, sticks, or won’t stay open. The balance or roller hardware has worn, or the frame has shifted slightly. Left alone, the drag stresses the sash and the frame.
- A door that won’t latch or swings open on its own. The frame has settled or the hinges and strike have worn. This is common in older Santa Rosa homes where the foundation and framing have moved over decades.
- Drafts or visible daylight at the frame. The weatherstripping has flattened or the sealant has failed. This is the one that shows up on your heating bill.
- Water staining or soft wood at the sill or jamb. Water has been getting behind the frame, and the wood or substrate is starting to go. This is the symptom to take seriously early, before it reaches the wall.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Santa Rosa depends on unit count, glazing, and whether the frame or surrounding wall needs repair. Here are the ranges we work from.
| Scope | Installed range (Santa Rosa) |
|---|---|
| Window replacement (project) | $4,500 – $15,000 |
| Impact window installation (project) | $8,000 – $25,000 |
What moves the number up or down: the series and glazing you choose, whether it’s a like-for-like sash swap or a full unit replacement, how many openings, and how much frame or drywall repair the opening needs once the old unit comes out. Impact-rated units sit at the top of the range because of the glass and hardware. Every quote is a flat written price with a written scope and a written warranty, delivered before any work starts. If the opening reveals rot or a shifted frame we didn’t see, no work proceeds on that change until you’ve signed a change order, which is how projects finish within a few percent of the agreed number. The work carries the 365-Day Done Right Promise, and every visit includes a documented photo record as standard.
DIY or Call Us?
There are a few things you can safely check yourself. Look for a manufacturer’s label on the jamb or sash and write down what it says. Wipe down the sash track and check whether the drag is debris or worn hardware. Run a hand along the frame on a cool evening to feel for drafts, and look for daylight at the sill. What goes wrong on a DIY window or door swap is the part the photos don’t show: the rough opening isn’t square, the old frame is hiding rot, or the new unit needs flashing and sealing done to spec or it will leak within a season. A door that’s out of plumb needs the frame addressed, not just new hinges. If your check turns up fogged glass, soft wood, or water staining, it’s time for an experienced hand. Our technicians have up to 19 years of experience. Call (833) 842-1866 to schedule a free estimate, or bring a competitor’s written quote for a free second opinion, reviewed line by line at no charge.
FAQs

Expect roughly 15 to 25 years for a sealed unit before the glass seal gives out, and longer for the frame itself if it stays dry. Santa Rosa’s swing between dry summers and wet winters is the real test: seals and weatherstripping wear faster here than in a mild coastal climate, so a unit that’s 20 years old and fogging is at the end of its service life, not failing early. Call (833) 842-1866 for an exact quote, and estimates are free.
Sometimes, yes. A fogged sealed unit can often be re-glazed with a new insulating glass unit without replacing the whole frame, and worn hardware on a dragging sash can be swapped. But if the frame is soft, out of square, or water-stained, a repair won’t hold and a full replacement is the honest answer. We’ll tell you which one you’re looking at after we inspect it.
A single sash or unit replacement is usually a one-day job; a whole-house window project typically runs several days depending on count and repair scope. We give you the schedule in the written quote, not a guess on the day. Call (833) 842-1866 and we’ll scope it and put the timeline in writing.
We start from the unit’s label and measure the rough opening and visible glass independently, so we match the series and profile rather than just the nominal size. We order OEM-compatible components where the line is supported and a matched aftermarket equivalent where it isn’t, and we document which we used. No parts are carried on any truck; each part is ordered to your unit. Call (833) 842-1866 to schedule your free estimate.
If a Unilock window or door in your Santa Rosa home is fogging, dragging, or leaking, the fastest way to a real number is a free written estimate. Call Rowan Construction Group Santa Rosa at (833) 842-1866, and we’ll inspect the unit, put the flat price and scope in writing before any work starts, and stand behind it under the 365-Day Done Right Promise.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












