







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Kitchen Remodeling: The Santa Rosa Owner’s Guide
Tremron-compatible kitchen remodeling in Santa Rosa typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and how much the project touches plumbing and electrical. The “part” most owners land here looking for is usually a Tremron surface product in a failing kitchen finish program – a paver-format backsplash, a Tremron-spec countertop edge, or a decorative tile field that has loosened from its substrate. We source and install these as part of full kitchen remodels, not as isolated replacement pieces, because the failure almost always traces back to what’s under the surface.
Owners usually discover the problem the same way: a hollow sound under a fingertip on the backsplash, a grout line that has opened at the seam where the counter meets the wall, or a tile that lifts clean off the substrate after a hot week. Santa Rosa’s inland heat cycling – 100°F afternoons in summer, cool fog-fed mornings the rest of the year – is hard on thin-set and mastic bonds that weren’t specified for the swing.
Which Tremron Models This Applies To

Tremron is best known for its paver and hardscape lines – Olde Towne, Sierra, Kingston, and the Tremron Casa series among them – so when a homeowner tells us they have “Tremron” in the kitchen, they usually mean a Tremron-format paver or brick-veneer product repurposed as a decorative backsplash, a hearth surround, or a floor inlay. Tremron also produces a line of modular brick-shaped wall products that installers adapt for interior accent walls.
Identifying the exact product starts with the box or carton the material arrived in, if the homeowner still has it. Failing that, measure the unit: Tremron pavers commonly run in 4×8-inch and 6×9-inch formats, with nominal thicknesses around 2⅜ inches for standard pavers. That thickness matters because a product sized for exterior hardscape needs a different substrate and adhesive than a standard ⅜-inch interior tile.
The OEM-versus-aftermarket decision is simpler here than on mechanical parts. Tremron doesn’t sell “kitchen parts” the way a faucet brand sells cartridges – the product is the material. What you’re matching is the format, the color lot, and the surface texture. Color lots change between production runs, which is why we always recommend confirming a current sample against the installed field before ordering. Rowan Construction Group Santa Rosa is an independent contractor and is not affiliated with Tremron; we source Tremron product through vetted distributors alongside KraftMaid, Cambria, and Silestone for the rest of the kitchen scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tremron Kitchen Remodeling Is Failing
- Hollow or drummy sound when tapped. This means the bond between the paver-format unit and the substrate has broken, usually because the original installer used a mastic not rated for the unit’s weight and the substrate’s movement.
- Grout lines opening at inside corners. A widening gap at the counter-to-wall seam signals differential movement – the cabinet run and the wall are shifting at different rates, and a rigid grout can’t absorb it.
- Efflorescence or white powdery bloom on the surface. Moisture is moving through the unit from behind, which points to a missing or failed waterproofing membrane rather than a surface problem.
- Edge spalling or chipping on a countertop format. Repeated impact at a high-traffic edge plus a brittle surface layer can chip; the fix is a new edge profile, not a spot patch.
- Loose units that lift clean off the substrate. When a paver-format piece comes off with no thin-set stuck to its back, the adhesive never bonded – often a dust-contaminated substrate or an unprimed surface.
Replacement Cost & What’s Included

Here are the installed ranges we quote for the Santa Rosa market. These are flat written prices with a written scope, not estimates that drift once the crew is on site.
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Tremron surface + full scope) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Backsplash installation (Tremron-format field) | $800 – $2,500 |
| Countertop installation | $2,000 – $6,500 |
| Cabinet installation | $4,000 – $13,000 |
| Kitchen island installation | $3,000 – $10,000 |
The range is driven by substrate repair (removing and replacing failed backer board or membrane), the color-lot match, and whether plumbing or electrical needs to move. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
An owner can safely check a few things: tap the surface to map hollow spots, confirm the unit dimensions with a tape measure, and inspect for moisture staining at the base of the wall. What goes wrong in DIY is the substrate and the bond. Setting a Tremron-format paver on a kitchen wall is not the same as setting a thin ceramic tile – the weight and thickness demand a specific thin-set, a flat substrate, and often a mechanical key. A failed bond at counter height can mean a unit dropping onto a stone counter or a gas range below, and that’s a genuine safety issue, not a cosmetic one. If the substrate is wet or the membrane is gone, a surface re-set just fails again in a year.
Call (833) 842-1866 to schedule a free estimate and a free second opinion on any written quote you already have.
FAQs

A correctly installed Tremron-format surface should hold 15 – 25 years indoors if the substrate and membrane were right. Failures inside five years almost always trace to the bond, not the material. Call (833) 842-1866 for a free estimate.
Sometimes – a single loose field unit or a re-grouted seam can be repaired if the substrate is dry and sound. If the hollow sound covers more than a few square feet or there’s moisture behind the surface, replacement is the honest answer. Call (833) 842-1866 and we’ll tell you which one you’re looking at.
A backsplash field swap runs one to two days; a full kitchen remodel with surface, cabinets, and countertop runs several weeks depending on scope. We confirm the schedule in writing with the price. Call (833) 842-1866.
We source Tremron product through vetted distributors and confirm a current color-lot sample against your installed field before ordering. If the exact lot has been discontinued, we’ll show you the closest match in writing before anything is purchased. Call (833) 842-1866 for a free estimate.
Get a Written Price on Your Santa Rosa Kitchen
If your Tremron-format kitchen surface is failing, the first step is a written scope that names the part, the substrate repair, and the flat price – before anyone picks up a tool. Rowan Construction Group Santa Rosa delivers a flat written price with a written scope and a 365-Day Done Right Promise on the work, plus a documented photo record on every visit so you have evidence of what was found and what was done. Call (833) 842-1866 for a free estimate, or bring a competitor’s quote for a free second opinion – we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












