







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Santa Rosa Owner’s Guide
We replace and repair Therma-Tru roofing components in Santa Rosa, and a typical installed repair runs $400 – $1,800, while a full roof replacement runs $8,000 – $20,000 depending on material and square footage. Therma-Tru’s roofing line includes steep-slope composite and shake-style profiles, and most owners discover a failing part the same way: a brown stain blooms on a ceiling in the hallway after a January rain, or a chunk of ridge cap turns up in the gutter after a windy night in the hills. By the time you’re reading this, the leak has usually been active for a season or two. Getting it looked at now, with the storm window still open in Santa Rosa, beats waiting for the next atmospheric river to find the same seam. Written estimates are free, and we put the number down before anyone touches the roof.
Which Therma-Tru Models This Applies To

Therma-Tru is best known for entry doors, and that’s worth naming up front: our Santa Rosa roofing work covers Therma-Tru’s roofing and exterior trim components, not their door lines. If you have a Therma-Tru roof system, the identify step is the same as with any manufacturer, and the label matters more than the product. Look on the underside of a ridge cap, the back of a starter shingle, or the header on the packaging in the attic, and you’ll find a series code and a lot number. Write both down. Photograph the label with your phone before anything gets pried up, because once a cap is off, the label goes with it.
The compatibility gotcha with Therma-Tru roofing is true of composite and shake-style profiles across most brands: the exposure and thickness spec has to match what’s already on the deck, or the new piece sits proud of its neighbors and lets water under the lap. A cap that’s 3/16-inch thicker than the original field shingles will look fine from the ground and fail from the first rain. Measure the exposure, meaning the visible height of each course, and the overall thickness, and bring both numbers to the conversation.
Then the OEM-versus-aftermarket decision. Original Therma-Tru parts are the reliable match, and for a repair on a roof that’s still under manufacturer coverage, they’re the only choice that keeps that coverage intact. Good aftermarket equivalents exist and can save real money, but only if the exposure and profile match. Where a color or texture has been discontinued, an aftermarket match is often the practical answer, and we’ll tell you plainly when it is. We are an independent service provider, not affiliated with Therma-Tru.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
Composite and shake-style roofing fails in recognizable stages. Here’s what we look for first on a Santa Rosa roof, and what each symptom usually means under the surface.
- Ceiling stains or attic dampness after rain. Water has already gotten past the deck, which means the failure is at a lap, a penetration, or the underlayment, not just the surface. Cosmetic touch-ups won’t stop it.
- Curling, cupping, or lifted edges on the profile. UV exposure and thermal cycling have started to break down the material or its fasteners. Once edges lift, wind-driven rain gets underneath and the peel accelerates.
- Granule loss or surface checking. The top layer is wearing thin, which shortens the roof’s service life and signals you’re near the end of the material’s useful window, not just in need of a patch.
- Loose or missing ridge caps and flashing. Often a fastener or sealant failure, and one of the cheaper fixes if caught early. Left alone, it becomes a leak point.
- Sagging or soft spots when you walk the roof. This one is a deck problem, not a roofing-part problem, and it changes the scope of the job. Sheathing may be soft and need replacement before any new material goes down.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the range, in dollars, so you can screenshot it and compare:
- Roof repair (a failed section, cap, or flashing): $400 – $1,800
- Roof replacement (full tear-off and re-roof): $8,000 – $20,000
- Tile roof repair (if you have a tile section): $600 – $2,500
- Metal roof installation (when the old system is beyond repair): $15,000 – $40,000
What moves the number: roof size and pitch, how many layers are already up there, whether the deck is sound, and whether the leak got into the underlayment. A single failed cap is a small job; a soft deck with active water intrusion is not. We quote a flat written price with a written scope before any work starts, and no change proceeds until a change order is signed. That’s the discipline that has kept our projects within a few percent of the agreed number across more than 4,000 jobs. Every visit includes a documented photo record so you have evidence of what we found and what we did.
DIY or Call Us?
You can safely do the inspection part. From the ground or a stable ladder, look for lifted edges, missing caps, granules in the gutter, and staining on the ceiling below. Photograph the label before anything gets touched. What you shouldn’t do is climb out onto a pitched roof to pry up caps or replace flashing yourself, especially on a two-story or steep-slope roof where a fall is the real risk, not the roofing. Getting the exposure and thickness match wrong is the other trap, and it fails quietly and expensively. Call us, and we’ll come look and tell you honestly whether you need a repair or a replacement.
FAQs

Composite and shake-style roofing typically runs 20 to 40 years depending on material and installation, but Santa Rosa’s sun and the wet winters we’ve had in recent years shorten the high end of that window. The material itself holds up well; the underlayment is usually what fails first in this climate.
Often yes, if the failure is localized to a cap, a flashing point, or a small section, and the rest of the roof is sound. A repair in the $400 – $1,800 range handles most isolated problems. If the deck is soft or the leak has been active for a season, replacement may be the honest answer.
A single failed section or cap is usually a half-day to full-day job. A full replacement is typically two to four days on a standard Santa Rosa roof, weather permitting. We give you a written schedule with the written price so you know what to expect.
We match by the label code and lot number first, then confirm exposure and thickness against what’s on your deck. If an original part is discontinued, we source a verified aftermarket equivalent or tell you plainly that a partial re-roof is the better path. We don’t carry parts on a truck, so the part is ordered to your roof, not pulled from a bin.
If your Therma-Tru roof is showing any of these signs, or you just want a second set of eyes before this winter’s storms, call (833) 842-1866 for a free estimate. We’re a full-service Santa Rosa contractor across seven trades, and we also service KraftMaid, Cambria, and Silestone products where your project touches the rest of the house. Bring us a competitor’s written estimate and we’ll review it line by line at no charge.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












