







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Santa Rosa Owner’s Guide
If you’ve got a Tamko product tied to your kitchen and a part has failed or is failing, here’s the short answer: kitchen remodeling work in Santa Rosa that involves matching or replacing Tamko materials typically runs $14,000 – $45,000 installed, depending on scope, cabinet line, and whether any framing or substrate repairs show up once we open things up. We quote a flat written price before any work begins, so that number is the number you agree to. Most owners discover a problem the same way: a small change they can’t unsee – a cabinet face that’s pulling away from the wall, a backsplash edge that’s taken on water, a countertop seam that’s started to move. One day it’s cosmetic. The next it’s structural. Call (833) 842-1866 for a free estimate.
We’re an independent service provider. We’re not affiliated with Tamko, and we don’t claim to be.
Key Takeaways
- Santa Rosa kitchen remodels run $14,000 – $45,000 installed, quoted flat and in writing before work starts.
- Tamko’s kitchen-adjacent products are limited – most often we’re matching or replacing them alongside KraftMaid or Cambria selections.
- The failure you can see is usually not the failure that matters. We document what’s underneath with photos on every visit.
- We quote the range honestly, not defensively – inflated numbers hide problems. Ours don’t.
Which Tamko Models This Applies To

Tamko is best known for roofing, waterproofing, and decking materials – not cabinetry or countertops – so when a Santa Rosa homeowner calls us about a “Tamko part” in a kitchen remodel, it’s almost always one of three things: a Tamko underlayment or moisture barrier installed beneath a tile floor or backsplash, a Tamko waterproofing membrane used behind a counter or wet wall, or a Tamko composite deck product that borders a kitchen addition or exterior door. Identifying which one you’re dealing with matters, because the replacement path is completely different for each.
The fastest way to know: check the product label. Tamko labels include the product family name and a batch or lot code. Photograph it before anything else. Measure the exposed surface in inches – the membrane width, the decking board face width, the underlayment roll width – because Tamko sizes these products in specific increments (36-inch and 48-inch roll widths are common for underlayment; decking board face widths run 5.5 inches and 5.25 inches depending on series). If the label’s gone, we can often identify the product from the texture, the color, and the fastener pattern visible at the edges.
OEM versus aftermarket: for Tamko underlayment and waterproofing, the OEM product usually has a specific perm rating and a specific tensile spec that matters in a wet application. A generic substitute can pass inspection and still fail in three years, particularly in Santa Rosa’s wet winters and dry summers, where materials see more thermal cycling than they do in a more temperate climate. We don’t carry Tamko parts. We source them, and we tell you which ones we’re sourcing and from where.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
Santa Rosa’s climate puts particular stress on kitchen materials: rainy winters push moisture against exterior walls and under doors, while dry summers pull that moisture back out. The cycle is relentless and it shows up in predictable places:
- Water staining along the backsplash edge. The Tamko underlayment behind the tile has lost its seal or was never properly lapped, so moisture is wicking under the tile and showing at the grout line. This is one of the first signs you’ll see, and one of the easiest to ignore until the grout starts crumbling.
- A spongy or soft floor near the sink. Underlayment failure under a tile floor typically shows as a soft spot within a foot or two of any water source. If the floor gives underfoot, the underlayment is already compromised – not beginning to fail.
- Musty smell that doesn’t clear. That’s mold feeding on wet substrate or underlayment. In Santa Rosa, a persistent smell after rain is a warning sign that the membrane is no longer stopping water.
- Lifted or cupping decking boards at the door threshold. A Tamko composite deck product bordering a kitchen entry can lift or cup if the framing underneath has shifted or water has gotten beneath it. It’s a kitchen-adjacent failure that shows up where you walk in.
- Grout cracking in a repeating pattern. When the substrate under the tile moves – because the underlayment has softened or the subfloor has swelled – the grout cracks in a pattern. A random crack is one thing; a repeating one is a signal.
Replacement Cost & What’s Included

For scope planning purposes, here are the installed ranges we quote in Santa Rosa – flat prices, with a written scope and a written warranty, before work starts:
| Work | Installed Price Range |
|---|---|
| Kitchen Remodel (full) | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the range: how much substrate has to come out to reach the failed membrane, whether cabinets have to be temporarily moved or removed, and what finish you choose. A cabinet line matters – KraftMaid runs differently from less expensive options. We also quote Cambria and Silestone regularly, and those selections affect the countertop line. The quote you get includes parts, labor, permit pulls, and disposal. There are no surprise add-ons. If a change is needed, we don’t proceed until a change order is signed. That’s been our practice since 2007, and it’s why projects land within a few percent of the written number.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some things you can safely check yourself. Photograph the label on the failed product. Measure the exposed surface. Note where the water is showing or the soft spot is. These observations help us get to the right diagnosis fast, and they cost you nothing.
What we don’t recommend: attempting to remove and replace Tamko underlayment or waterproofing membrane yourself. The membrane has to be lapped correctly and bonded to the substrate with a specific fastener schedule, and an improper install behind tile or counter is far more expensive to fix than to get right the first time. We’re licensed and insured, and our technicians have up to 19 years of experience with this kind of work. Pulling a membrane that’s part of a waterproofing assembly and replacing it isn’t a weekend job – it’s a trade. Call (833) 842-1866 to schedule a free estimate. We’ll tell you what we find – with photos – and put the price in writing.
FAQs

Tamko underlayment and waterproofing products are rated to last 15 to 25 years in a properly installed assembly – and the “properly installed” part matters more than the product itself. Santa Rosa’s wet-dry cycle is hard on any material, and an assembly that wasn’t lapped or fastened correctly can fail in five to eight years. That’s the reality, not the spec sheet.
Sometimes it can be. A localized membrane failure at a seam can be repaired if the surrounding material is sound. A membrane that’s lost its bond across an area, or an underlayment showing widespread softening, needs replacement. We check both, and we tell you which one applies. Call (833) 842-1866 for an exact quote – estimates are free.
A localized repair on a backsplash or counter assembly is typically a one-day job. A full replacement behind tile or cabinets is typically two to four days, depending on how much has to be removed to reach the membrane and whether any subfloor repairs are needed. Your written quote gives you the timeline, not a phone estimate.
We source from regional supply houses, and we tell you exactly which product we’re ordering, from where, and at what price. We don’t carry stock, so we’re not selling you what happens to be on a truck. We order what fits the assembly, and we show you the invoice.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.
Ready to Get the Number in Writing?
If you’ve found a failed Tamko product in your kitchen, the useful next step is a written price – not a phone estimate or a “ballpark.” Call Rowan Construction Group Santa Rosa at (833) 842-1866 to schedule your free estimate. We’ll check the site, document what we find, and give you a flat written scope and price before anyone picks up a tool. Every project. Every time.












