







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Bathroom Remodeling: The Santa Rosa Owner’s Guide
Bathroom remodeling in Santa Rosa runs $9,000 – $28,000 installed, and that’s the number to hold onto before anyone picks up a tool. We install Tamko-compatible bathroom systems and materials where they belong in the assembly – not as a roof membrane shoved into a wet room, but as the actual product line specified for the job. To be clear about who we are: Rowan Construction Group Santa Rosa is an independent contractor, not affiliated with Tamko, and we quote a flat written price before work starts on every bathroom we touch.
How do Santa Rosa owners usually find out something’s wrong? They notice a soft spot at the shower curb, a hairline crack working across the floor tile, or a ceiling stain in the room below that wasn’t there last winter. One inspection opens up the wall and the story gets clearer: failed waterproofing at a corner, a drain flange that was never properly seated, a substrate that moved because nobody accounted for Santa Rosa’s seasonal clay soil shifting under a slab-on-grade bathroom. The symptom is cosmetic. The cause almost never is.
- Written price before any work starts – flat, itemized, no “call for a quote.”
- 365-Day Done Right Promise – if it isn’t done right, we make it right, under The Haven Standard.
- Free second opinion on any written estimate you’re holding, reviewed line by line.
Which Tamko Models This Applies To

Tamko’s residential line is built largely around roofing and waterproofing products, and the relevant question for a bathroom is where a Tamko material actually belongs in the wet assembly. If your home was built with a Tamko underlayment or moisture-barrier product beneath the bathroom floor or behind the tile, matching the replacement means identifying the product by its printed roll markings, not by guessing from the color. Roll goods carry a series designation and a batch code on the core or the edge print; photograph it before anything gets torn out, because that label is gone once the demo starts.
The OEM-versus-aftermarket decision matters here. A genuine Tamko matching product keeps the warranty chain intact and matches the original thickness and vapor rating within spec. A quality aftermarket membrane from a vetted manufacturer can meet the same ASTM water-vapor and tensile standards for less money, and on a renovation where the original product is discontinued, aftermarket is often the only honest path. We carry sourcing relationships across fifty-plus vetted brands – KraftMaid, Cambria, and Silestone among them for the finished surfaces – so the written quote reflects real numbers, not inflated ones padded to cover a substitution.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Bathroom Remodeling Is Failing
- Soft or spongy floor near the shower or toilet. Water has reached the substrate and the underlayment is breaking down. This is the one symptom that almost always means the assembly has to come apart.
- Hairline cracks tracking across grout lines. Grout cracking in a straight line usually points to movement in the subfloor, not a grout problem – Santa Rosa’s expansive soils flex slabs through the wet and dry seasons.
- Musty smell that won’t clear with ventilation. That’s trapped moisture behind tile or under a membrane that failed at a seam. Air freshener hides it; a moisture meter finds it.
- Water staining on the ceiling below. A drain flange or pan liner has given way. Stop using the shower until it’s inspected, because the damage compounds fast.
- Loose tile or hollow-sounding taps. Bond failure from moisture intrusion, often at the shower curb where the waterproofing turns the corner. A hollow tap with a knuckle tells you more than a visual check.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed bathroom remodeling in Santa Rosa lands between $9,000 and $28,000 for a full remodel, and the range is driven by square footage, how much of the substrate needs replacing once it’s opened, fixture grade, and whether the layout changes. A small bathroom remodel sits at $5,000 – $12,000. A walk-in shower installation runs $4,500 – $12,000; a tub-to-shower conversion $3,500 – $10,000; a straight shower replacement $3,000 – $8,500; a vanity install $800 – $3,000. Every one of those is a flat written price with a written scope, delivered before anyone touches the room, and no change proceeds without a signed change order – that discipline is why our projects finish within a few percent of the number the customer agreed to.
What’s included in the install: removal and disposal, substrate repair to a sound surface, the waterproofing and drain work done to spec, the Tamko-compatible material set where specified, and the finish work. The written warranty covers the workmanship, and the 365-Day Done Right Promise backs it. You get a documented photo record on every visit, so you have evidence of what we found and what we did, not a verbal summary after the fact.
DIY or Call Us?
Here’s the honest split. You can safely lift a loose tile, run a knuckle tap across the floor to find hollow spots, photograph the roll label under the floor covering if it’s exposed at a transition, and check the ceiling below for staining. That’s diagnosis, and it’s useful.
Where DIY goes wrong is the rebuild. Bathroom waterproofing fails on the details – the pan liner fold at the curb, the drain clamping ring, the seam laps in the correct direction, the slope to the drain measured in fractions of an inch. A homeowner can lay tile beautifully and still end up with a shower that leaks in eighteen months because a seam was lapped the wrong way. And if your assembly involves any electrical at the vanity or in-floor heat, that work is not a homeowner job. Stop there and call a licensed electrician. That’s not a scare tactic; it’s the difference between a fix and a do-over. Call Rowan at (833) 842-1866 for a free estimate before you buy a single box of material.
FAQs

A properly installed waterproofing assembly typically holds 20 – 30 years, but in Santa Rosa’s climate you should expect to inspect the wet areas every few years. Our wet-dry swing – a wet winter followed by a dry summer that pulls moisture out of expansive clay – works slab-on-grade bathrooms harder than a stable climate does. Call (833) 842-1866 for an inspection if your bathroom is more than fifteen years old.
Sometimes, yes – a failed drain flange or a single compromised seam can be repaired if the surrounding assembly is sound. What can’t be repaired is a saturated substrate; once the underlayment is soft, the floor has to come up. We’ll tell you which one you have after a moisture check, and the estimate is free.
A shower replacement runs three to five working days once materials are on site; a full bathroom remodel runs two to four weeks depending on scope and whether the layout changes. We write the schedule into the scope so you know what you’re planning around. Call (833) 842-1866 to get your timeline in writing.
We identify your product from its printed series and batch markings, then match it through our fifty-plus vetted brand relationships to a spec-compliant product – OEM where it’s available and keeps the warranty chain, a quality equivalent where the original is discontinued. We quote the sourcing decision in writing so you can see exactly what’s going in and why.
Every bathroom we quote starts the same way: a written price, a written scope, and a documented record. If you’re holding a competitor’s estimate, bring it in for a free second opinion – we’ll go through it line by line at no charge, no obligation. Call (833) 842-1866 to schedule your free estimate with Rowan Construction Group Santa Rosa.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












