A Rowan company - serving Santa Rosa, CA
A new herringbone paver driveway
Quikrete · Santa Rosa

Quikrete Home Additions & ADU in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A new paver pool deck
A new curved paver walkway to the front porch
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Quikrete Home Additions & ADU: The Santa Rosa Owner’s Guide

We build Quikrete-compatible home additions and ADUs in Santa Rosa, with written flat pricing before any work starts. A home addition in Santa Rosa runs $45,000 – $130,000, a garage conversion $30,000 – $80,000, and a full ADU $90,000 – $220,000. These are planned builds measured in months, not days, so we schedule them properly rather than promising same-day starts.

Call (833) 842-1866

Owners usually land on this page after a specific discovery. The slab under a planned addition turns out to be 3-1/2 inches of old concrete rather than the 4-inch minimum, and a contractor has told them it needs to come out. Or an unpermitted garage conversion surfaces during a pre-sale inspection and the fix is suddenly urgent. Or a stack of Quikrete bags in the garage from a previous owner’s half-finished project raises the question of what mix is actually spec’d for structural work. The common thread is that Quikrete is a name homeowners know from bagged concrete, mortar, and repair products, and they want to know how that brand fits into a real addition or ADU project. Here’s the honest answer, with the numbers attached.

Which Quikrete Models This Applies To

A crew setting pavers over a compacted base

Quikrete doesn’t make additions or ADUs, and we want to be clear about that up front: Rowan Construction Group Santa Rosa is an independent service provider, not affiliated with Quikrete. What Quikrete does make is the concrete and masonry side of the project. The products that turn up in an addition or ADU scope are bagged concrete mixes (the 80-lb High Strength Concrete Mix and the 5000 PSI mixes), mortar mixes for block and brick, Sand/Topping Mix for shallow pours and patching, and anchoring products like anchoring cement for setting post bases and sill plates.

Identifying the right product means reading the bag, not the shelf. The mix number, the PSI rating, and the cure time are printed on the bag face and the back panel, and they matter: a 5000 PSI mix and a basic 4000 PSI mix are not interchangeable under a load-bearing footing. For footings and slabs on a Santa Rosa addition, the spec is usually a design-mix concrete delivered by truck rather than bagged material, because volume and consistency both fail once you’re past a few wheelbarrows. We use bagged Quikrete where it belongs: small pads, post bases, thresholds, and repairs.

On the OEM-versus-aftermarket question: for bagged concrete there’s no meaningful aftermarket equivalent worth chasing. The bagged product is the product. Where the real decision sits is in the structural components around it, and we source those through fifty-plus vetted brands, including cabinet lines like KraftMaid, Cambria, and Silestone for the interior finishes on an ADU. You get one written quote with honest line items, not an inflated number padded for brand prestige.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Quikrete Home Additions & ADU Project Is Heading Wrong

These aren’t parts that fail on a shelf. They’re conditions on the site that show up early and get expensive if they’re ignored.

  • The existing slab reads thin under a straightedge. Pull a tape at an exposed edge or at a drilled test hole. Anything under 4 inches in a slab that will carry an addition means the concrete has to be evaluated before framing, and sometimes replaced. Under-built slabs from the 1950s and 1960s are common in older Santa Rosa neighborhoods.
  • Bagged mix is being spec’d for a footing pour. If a contractor plans to build a load-bearing footing out of wheelbarrowed 80-lb bags, ask for the design mix and the PSI. Bagged concrete is fine for pads and post bases; structural footings need a tested mix and usually an inspection.
  • Anchoring at the sill plate looks hand-set. Post bases and sill plates set with anchoring cement need the hole cleaned and the mix placed per the bag’s instructions, with the right cure window before load. Loose, dusty holes and a rushed cure are the usual reason a base pulls free later.
  • An existing garage conversion was done without permits. Santa Rosa has specific requirements for converting a garage to living space, including egress, insulation, and often a foundation and drainage check. Unpermitted work surfaced at inspection is a common reason owners call us for a rebuild to code.
  • The ADU plan ignores drainage and slope. Santa Rosa sits in a rainy climate with clay-heavy soils in parts of the county, and an ADU pad that doesn’t shed water correctly will heave and crack. If a plan has no grading detail, that’s a flag worth raising before the pour.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new clay tile roof

A home addition in Santa Rosa typically runs $45,000 – $130,000 installed. A garage conversion runs $30,000 – $80,000, and a full ADU runs $90,000 – $220,000. Those ranges cover the structural work, the concrete and masonry, the interior finishes, and the permits and inspections, and the range moves with square footage, foundation condition, and finish level.

What drives the number more than anything else is the foundation. A clean, code-compliant slab and a flat site keep you near the bottom of the range; a thin slab, poor drainage, or unpermitted prior work pushes toward the top. We deliver the price in writing before any work starts, with a written scope that lists what’s included and what isn’t, and a written workmanship warranty on the build. Material and labor are broken out line by line so you can see where the dollars go. No change order gets signed off on until you’ve read it, and work stops until it’s signed. That discipline is why our projects finish within a few percent of the agreed number.

DIY or Call Us?

You can safely check a few things yourself. Read the mix number on any Quikrete bag you’re planning to use and confirm it against the spec. Measure your existing slab thickness at an exposed edge. Pull the permit history on your property through the city. And get a straightedge on the pad area to see how flat and level the ground is.

Where DIY goes wrong is structural. Concrete footings, anchor placement, and drainage grading under an addition or ADU are not the place to learn by doing. A footing that’s under-spec’d or a pad that drains toward the structure will cost you far more to fix than to do correctly the first time. Tell us what you’ve found and we’ll tell you what it means. Call (833) 842-1866 for a free estimate, and we’ll review any written quote you already have line by line at no charge.

FAQs

New double-hung windows in a dining room

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled hall bathroom with patterned floor tile and painted wallsA remodeled primary bathroom with a soaking tub and walk-in showerA single-story rear room addition with tall windows and a new patioA new front yard fence with a matching gateAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroom

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch