







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Home Additions & ADU: The Santa Rosa Owner’s Guide
If you’re adding a home addition or ADU and your plan includes Mr-Glass components, expect an installed range of $45,000 – $130,000 for a home addition in Santa Rosa, and $90,000 – $220,000 for a detached ADU. We install Mr-Glass-compatible building envelope specs and will schedule a free estimate at your property whenever you’re ready. Homeowners usually discover a problem during one of two moments: a draft or damp spot they can’t trace back to a window or door, or a finish line that doesn’t line up after the framing stage. Mr-Glass product lines aren’t usually the first thing blamed. They’re the thing you find last.
Which Mr-Glass Models This Applies To

Mr-Glass products show up across North Bay additions where a build needs specific sized exterior assemblies, glazing packages, or structured envelope components. Identifying the right part starts with the model sticker, which is placed on the product frame during manufacture; photograph it, because it often sits behind the drywall once installation is complete. Where the sticker can’t be found, the model number can usually be cross-referenced against the original installation paperwork or matched by measuring the assembly opening to the nearest sixteenth of an inch. Mr-Glass does not publish a single unified compatibility grid for every product it makes; model lines vary by year and by what the original installer ordered.
The OEM-versus-aftermarket decision is straightforward for most Mr-Glass parts. OEM is the right call when the part interacts with a glazing seal, an explosion-resistant barrier, or any load-transferring connection – the tolerances are too tight for a second-guesser. Quality aftermarket equivalents are fine for non-structural trim, weather-sealing profiles, and finish hardware, where the model-to-model variance is smaller and the difference in price is real. Santa Rosa homeowners with early-2000s Mr-Glass assemblies often find that the original spec is still in production, which is a much simpler repair than replacing a custom order. Note that Rowan is an independent contractor and is not affiliated with Mr-Glass.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Home Additions & ADU Is Failing
- Drafts or condensation at the junction where the addition wall meets the original structure. The thermal break around the framing transition is degrading. In Santa Rosa’s cool, wet winters and hot dry summers, the expansion and contraction cycles work that seal harder than a fixed climate would.
- Water staining on interior drywall at the soffit or header. The weather-resistive barrier behind the exterior finish has a gap or a tear. This often goes unnoticed until the first winter rain penetrates past the siding.
- Doors and windows that no longer close square in the new room. The addition’s framing has settled or the header has deflected. This isn’t a parts failure, but it’s a signal worth reading before you finish the interior.
- Visible cracking or separation along the wall-top plate. The connection between the new addition and the existing house has loosened. Common where the original structural tie-in wasn’t built to current seismic requirements.
- A musty smell in the new room that won’t clear. Moisture is trapped between the wall layers. Often the dampproofing or drainage plane at the foundation stem wall, and the fix is more involved than a repaint.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Home addition projects in Santa Rosa involving Mr-Glass assemblies typically fall in the $45,000 – $130,000 installed range. The number moves with square footage, structural complexity, and whether the addition connects to existing load paths. What drives that range up: a two-story build, a cantilevered second floor, or site access that requires small equipment. What keeps it in the lower band: a single-story bump-out on a flat slab with straightforward framing and existing utility tie-ins.
| Scope | Santa Rosa Installed Range |
|---|---|
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
The written price covers parts, labor, permits, and the workmanship warranty, with no line items that only appear after the job starts. We deliver a written scope and flat price before any work begins; no change proceeds without a signed change order. If a Mr-Glass-specified part fails within the workmanship warranty period and the failure traces to our install rather than a manufacturing defect, we make it right at no cost under the 365-Day Done Right Promise.
DIY or Call Us?
Some checks are safe for any homeowner. Finding the Mr-Glass model sticker, photographing it, and matching it to original build paperwork is information-gathering, not a repair. Measuring a replacement opening is also fine. Where DIY starts costing you: attempting to re-seal or re-flash a building envelope transition without knowing the original WRB product and intended drainage plane. A wrong membrane choice in Santa Rosa’s wet-winter climate doesn’t fail right away – it fails after one or two rainy seasons, long after you’ve finished the interior. Structural changes involving headers, load paths, or the tie-in between the addition and the existing house should always go to a licensed contractor; this work carries real safety consequences, and we’d rather do it right. Call (833) 842-1866 to set up a free second opinion on any written estimate you have, including one that names a Mr-Glass product.
FAQs

Most Mr-Glass exterior assemblies carry a 10 – 20 year service life in Santa Rosa conditions, though we’ve seen original assemblies perform well past 25 years where the installation and flashings were done right. What shortens lifespan fastest is water intrusion at the framing transition, not the part itself. Call (833) 842-1866 for an inspection and an honest answer about how much life the current install has left.
Sometimes. Serviceable components – trim hardware, weather seals, finish profiles – can usually be repaired or replaced in isolation. Structural connections and the glazing seal are the exceptions; if the failure has compromised the weather envelope or the load path, partial repair tends to fail again within two seasons. We’ll tell you which category you’re in before quoting either path. Call (833) 842-1866 for the diagnosis.
A single-part replacement inside an existing assembly usually takes 2 – 4 hours on site. A full home addition or ADU project involving Mr-Glass components runs weeks to months, depending on scope and permit timelines in Santa Rosa. The part itself, once we have the right model number, typically arrives within one to two weeks depending on the Mr-Glass product line. Call (833) 842-1866 to talk through timelines specific to your build.
We start with the model sticker or original installation paperwork, then cross-reference against the Mr-Glass product line documentation for that model year. When documentation is missing, measurements and photos go to our supply contacts for a match. We don’t guess at compatibility; if the part can’t be verified, we tell you before ordering anything. Call (833) 842-1866 and have a photo of the model sticker ready if you can.
Rowan Construction Group Santa Rosa brings up to 19 years of experience to home addition and ADU projects across Santa Rosa. Every project gets a written price and scope before we pick up a tool, a signed change order before any change proceeds, and a documented photo record on every visit. We also work with KraftMaid, Cambria, and Silestone products throughout the same builds. Call (833) 842-1866 for a free estimate on your Santa Rosa home addition or ADU project.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












