







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Santa Rosa Owner’s Guide
KraftMaid cabinets don’t fail all at once. They fail a hinge at a time, one soft-close damper at a time, one drawer glide at a time, and Santa Rosa homeowners usually notice the failure in the kitchen first: a door that won’t stay shut, a drawer that shudders on the way in, a soft-close that stopped being soft-close six months ago. A single-part repair is small. When enough of the hardware has aged out, or when a 1990s or 2000s kitchen is ready for a full reinvention, a kitchen remodel runs $14,000 – $45,000 in this market, and cabinet-specific line items (installation, countertops, backsplash, island) fall well below that. We’re an independent service provider, not affiliated with KraftMaid, and we don’t carry KraftMaid parts in stock or on a truck. What we do is match a KraftMaid part number to your cabinet series, name the price in writing before anything gets ordered, and install it with the same discipline we apply to a full kitchen.
Which KraftMaid Models This Applies To

KraftMaid builds cabinet lines under a few broad umbrellas – the most common installed in Santa Rosa homes built or updated between the mid-1990s and today are the Woodstar and Woodstar Estate lines, the Vista and Prelude series, and the Marquis and Marquee collections. The name matters less than the cabinet’s internal dimensions and the door style, because the hardware inside is chosen to fit those. A soft-close hinge on a 35mm door bore will accept a range of aftermarket replacements; a hinge on a frameless cabinet is a different animal than a hinge on a face-frame cabinet with a 3/8-inch overlay. So before we name a part, we measure three things: door overlay, the center-to-center of the existing hinge cup and plate, and the drawer box height and glide type.
Where you find that information: the label inside the cabinet door or on the back of a drawer box usually carries the model and sometimes the door style; failing that, the inside of the sink base or a tall pantry panel is where cabinet makers hide the identification. The OEM-versus-aftermarket decision for KraftMaid is genuinely a close call. OEM KraftMaid hardware matches the original exactly, but the replacement can carry a premium and often runs on backorder. A quality aftermarket equivalent – Grass, Blum, Hettich, or a comparable German or American maker – costs less, typically installs in a fraction of the time, and frequently holds up better. Most Santa Rosa clients choose the aftermarket route; we’ll show you both prices in writing and let you pick.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Kitchen Remodeling Is Failing
- Doors that drift open or don’t close flush. The soft-close hinge has lost its spring tension or the cup has cracked. Some hinges are adjustable back into alignment; if the hinge body is broken, replacement is the only fix.
- Drawers that bind, wobble, or track crooked. Usually a drawer glide that’s worn through its plastic bearing, or a cabinet side that’s shifted out of square. Accurately diagnosing which one saves you from replacing a glide when the real problem is structural.
- Soft-close mechanisms that no longer slow the door. The damper has dried out or failed. On most KraftMaid hinge designs, the damper is not a separate replacement part – the whole hinge comes off and a new one goes on.
- Sagging shelves, broken shelf pins, or a toekick that’s separated. Shelf pins are the most common failure point in a kitchen that’s 15 – 20 years old; the wood fiber around the pin hole softens in the damp air Santa Rosa kitchens see in winter and the pin loses grip.
- Doors that rub or stick in summer, then free up in fall. A wood cabinet door does move a little with humidity, which is normal. Persistent rubbing in one season points to a hinge gone out of adjustment, or cabinet boxes that have settled.
Replacement Cost & What’s Included

In Santa Rosa, hardware replacement on a handful of KraftMaid doors costs considerably less than a full cabinet installation, and cabinet installation itself runs $4,000 – $13,000. Countertop replacement, which is often what prompts the remodel conversation, runs $2,000 – $6,500; a backsplash install runs $800 – $2,500; a kitchen island install runs $3,000 – $10,000. A full kitchen remodel runs $14,000 – $45,000, and a small kitchen remodel runs $9,000 – $20,000. The range is driven mostly by cabinet count, countertop material (Cambria, Silestone, and Caesarstone are the three the clients we work with ask about most), and whether the layout is moving.
Every KraftMaid kitchen project – from a single hinge swap to an island install – gets a written price delivered before any work starts, with parts and labor broken out as separate lines. Nothing is ordered until you sign off. The work carries our 365-Day Done Right Promise, which is printed on the page and backed by a terms page, not an asterisk. If you’d like a second look at any other written estimate, bring it in and we’ll review it line by line for free.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
For KraftMaid hardware, a homeowner can safely do three things: identify the cabinet series from the label, measure door overlay and hinge spacing, and photograph the failing mechanism. That’s genuinely useful – it saves us a trip and it saves you a diagnostic fee. What we don’t recommend as a do-it-yourself job: cutting new hinge cup bores, working around a drawer glide that’s interfering with the cabinet side, or retrofitting soft-close hardware into a cabinet whose hinge plate wasn’t originally designed for it. Door hardware lives inside a small tolerance band, and the failure case we see most often in Santa Rosa is a homeowner who bought the right hinge online but sized to the wrong overlay, bored a fresh hole 2mm off, and now the door won’t close.
Here’s the simplest version: call us with the cabinet label photo and a note on what’s failing. We’ll tell you on the phone whether it’s a $20 part or a job worth a crew, and the price comes in writing before we install. (833) 842-1866 – calls are answered by a live person, background-checked and uniformed technicians handle the work, and you’ll get a documented photo record of every visit whether it’s a hinge or an entire kitchen.
FAQs

Expect 10 – 15 years out of soft-close hinges and drawer glides in a Santa Rosa home, sometimes shorter in kitchens with heavy daily use or in rooms where winter moisture swings the cabinet boxes. Fully integrated drawer glides tend to last longer than undermount slides with plastic bearing races, and the failure timing isn’t a knock on KraftMaid specifically – it’s the wear band on any soft-close hardware. Call (833) 842-1866 and we’ll tell you which of your parts is closest to its end.
Sometimes. On roughly half the doors we inspect in Santa Rosa, the hinge can be re-adjusted back to spec (three-axis hinges allow for overlap, depth, and side adjustment with a screwdriver). The other half have a cracked hinge cup, a broken spring, or a misshapen plastic part, and those need replacement. Glides on a drawer box are usually a whole-slide replacement rather than a repair. Bring us a photo and we’ll tell you which case you’re in before you order anything.
A standard KraftMaid hinge or glide swap is 15 – 30 minutes per door or drawer, and a small batch of hardware work usually finishes in under two hours. A full kitchen of new hardware is a half-day, sometimes a full day if the cabinet box alignments need attention. We book the work in one visit and the price is agreed before the visit – call (833) 842-1866 to schedule.
We source to the part number, not the brand name. You bring the photo, the label, and the cabinet model; we look up the OEM KraftMaid part, then quote an aftermarket equivalent from a maker like Blum, Grass, or Hettich alongside it, both in writing with delivery time and warranty. We don’t hold KraftMaid inventory in stock and nothing rides on a truck – the parts are ordered to your kitchen, in writing, before we install them. Estimates are free.
Get a Written Price on Your KraftMaid Kitchen in Santa Rosa
Whether it’s one failing hinge or a full KraftMaid kitchen remodel, Rowan Construction Group Santa Rosa quotes the flat price in writing before anything gets ordered – parts, labor, scope, warranty, all on one page. Under Clause 1 of The Haven Standard, the number you sign is the number you pay, and no change proceeds without a signed change order. Call (833) 842-1866 for a free estimate, and bring a photo of the cabinet label if you have one.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












