







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose Kohler Construction
Rowan Construction Group Santa Rosa is an independent remodeling contractor that installs and services Kohler fixtures, faucets and shower systems across Santa Rosa and Sonoma County. We work on Kohler’s actual valve platforms, trim lines and shower systems rather than treating the brand as a logo on a catalog page, and every job starts with a written price before anyone picks up a tool. We are not affiliated with, authorized by, or sponsored by Kohler. We’re an independent provider, which is exactly why our numbers stay honest. Call (833) 842-1866 to schedule a free estimate in Santa Rosa.
Kohler sits alongside Toto in our fixture sourcing because the two brands reward careful installation and punish shortcuts differently. A Kohler shower system that’s set on a properly prepped substrate lasts decades. The same system on a bad backer fails in a few seasons. Santa Rosa’s housing stock runs from mid-century ranch homes in Coffey Park and Roseland to 1970s hillside contemporaries in Fountaingrove and pre-1950 Victorian and craftsman work near Railroad Square, so the substrate under a Kohler fixture varies block to block. We price the tear-out and the backer repair on the same written scope as the trim install.
Why Trust Rowan Construction Group Santa Rosa for Your Kohler Construction?

Our technicians have up to 19 years of experience, and a meaningful share of that has been spent on Kohler trim and valves specifically. We know that a Purist widespread faucet and a Composed single-handle use different cartridge families, that Memoirs toilet tanks and Devonshire tanks aren’t interchangeable even when they look close in photos, and that Vibrant Brushed Nickel and Vibrant Stainless finishes behave differently in a wet, mineral-heavy bathroom. That familiarity changes what we order and how we install.
We specify genuine Kohler OEM cartridges, valves and trim for warranty-sensitive and finish-critical work. That matters for two reasons. First, a Kohler finish warranty is more defensible when the parts on the fixture are Kohler parts. Second, aftermarket cartridges that fit a Kohler body often don’t seat identically, which shows up as a slow drip six months later. Where OEM adds cost without benefit, like supply lines and generic seals, we use recognized quality aftermarket parts and say so on the quote.
The other thing we bring is process. Under Clause 1 of The Haven Standard, the price is written before anyone starts. That’s true whether the job is a cartridge swap or a full Kohler shower conversion. No change proceeds without a signed change order, and every visit includes a documented photo record as a standard deliverable. You’ll see the valve before we touch it, the backer before we close the wall, and the finished test.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Santa Rosa
Kohler builds durable fixtures, and most of what we see isn’t a defect. It’s wear that traces back to Santa Rosa water, installation conditions, or an aging valve platform. Here are the ones we pull trim on most often.
- Ceramic cartridge drip and hard-water scale in Kohler single-handle faucets. Purist, Composed and Simplice single-handle faucets commonly develop a slow drip or a stiff lever after a few years. Santa Rosa’s mineral-heavy water wears the ceramic seats and deposits scale on the cartridge face, so a faucet that feels “gritty” usually needs a cartridge, not a new faucet. We pull the trim to match the exact valve platform before ordering.
- Finish wear and pitting on Vibrant Brushed Nickel and Vibrant Stainless trim. Both finishes hold up well, but in a wet bathroom with hard water they pit where water sits – around the spout base, the shower escutcheon and the drain. It’s a finish and maintenance issue, not a defect. Left alone, pitting can eat into the base metal.
- Choreograph shower wall panel chipping and seam failures. Choreograph panels are durable on their own. They fail when they’re set over a poorly prepped substrate or directly on damaged backer, because the panel flexes and the seam opens. We always check the backer before we hang a panel.
- Underscore and Archer alcove base leaks at the drain and waste-overflow gasket. These bases are usually blamed for a leak that’s really the gasket, made worse by an under-supported floor that flexes the base. We check the subfloor and re-seat the drain assembly before assuming the base is bad.
- Running-toilet symptoms on Kohler Highline and Wellworth. A toilet that runs constantly is usually a worn fill or flush valve, not a bad fixture. Homeowners often call it a “Kohler problem” when it’s a $20 valve. We confirm which before we quote anything bigger.
Kohler Parts & Our Repair-vs-Replace Approach

We source Kohler parts per job to match the exact model and valve platform on your fixture. We don’t claim to stock Kohler parts locally. When a faucet needs only a cartridge, or an Underscore tub needs a drain gasket, repair beats replacement on cost and on preserving the finish you already own. We recommend replacement only when the finish is failing across the whole fixture or the body is cracked or corroded. That’s an honest call, made after we’ve seen the part.
Because Santa Rosa sits in a Mediterranean climate with hot, gusty autumn winds, we schedule exterior-adjacent fixture work for spring and early summer where we can, so finishes cure in the right conditions. Interior Kohler work runs year-round. Either way, a written price goes out before work starts. Call (833) 842-1866 and we’ll give you a flat written quote on the specific Kohler part or system you’re dealing with.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We pull the trim, escutcheon and cartridge to identify the exact Kohler valve platform and model – whether it’s a Purist single-handle, a Composed widespread, or an older Memoirs faucet body that pre-dates the current cartridge family. We photograph the valve and post it to your photo record.
- 2
Written scope and price. You get a flat written price on the repair or install, with the parts specified by Kohler part number. If the scope changes once we’re inside the wall, the change requires your signature before we proceed.
- 3
Repair or install. We install genuine Kohler OEM parts on warranty-sensitive and finish-critical work, and quality aftermarket parts on wear items where OEM adds cost without benefit. On showers and tubs, we check the backer, subfloor and drain assembly so the Kohler product sits on a sound base.
- 4
Test. We pressure-test the valve or shower system, run the faucet through hot and cold cycles, and verify no weeping at the drain or waste-overflow before we close the wall. The test is documented, not just performed.
- 5
Written warranty and 365-Day Done Right Promise. Every Kohler install and repair carries our written warranty, backed by The Haven Standard. If it isn’t done right within 365 days, we make it right. That’s printed on the page, not an asterisk.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Santa Rosa
We work across Kohler’s bath fixture and trim lines: Memoirs and Devonshire toilets, sinks and tubs; Purist and Composed faucet and shower trim; Choreograph shower wall systems with Levity and Rely shower doors; and Archer and Underscore alcove tubs and shower bases. Our Kohler work most often sits inside full bathroom remodeling, tub-to-shower conversion and walk-in shower installation, where the trim, valve and drain all need to line up. Santa Rosa’s WUI fire-hardening rules don’t govern interior bath work, but they do shape how we sequence a bathroom in a Coffey Park or Fountaingrove home where adjacent lots were built years apart under different code cycles. Call (833) 842-1866 to talk through your Kohler scope.
We Also Service These Brands
Kohler is one part of the picture. We also work with KraftMaid and Cambria and Silestone for cabinetry and countertops, and Toto for toilets and fixtures, so a bathroom remodel can mix the brands that suit each piece instead of locking you into one line. Fifty-plus vetted brands sit behind our quotes, which keeps the written number honest rather than inflated.
FAQs – Kohler Construction Service in Santa Rosa

No. Rowan Construction Group Santa Rosa is an independent remodeling contractor and is not affiliated with, authorized by, or sponsored by Kohler. We install and service Kohler fixtures, faucets and shower systems because we know the product lines and valve platforms, not because Kohler endorses us. That independence is why we can give you an honest repair-vs-replace call without a manufacturer’s sales interest in the answer. Call (833) 842-1866 for a free written estimate.
Yes, on warranty-sensitive and finish-critical work. We specify genuine Kohler OEM cartridges, valves and trim because the finish warranty and long-term fit depend on the part matching the fixture. For wear items like supply lines and seals, we use recognized quality aftermarket parts where OEM adds cost without a real benefit, and we note that on the quote so nothing is buried.
A cartridge swap is typically a same-visit repair; a shower or tub conversion runs one to several days depending on the substrate and drain condition. The honest answer depends on what’s behind the trim, which is why we diagnose first and put the timeline in the written scope. Call (833) 842-1866 and we’ll give you the range for your setup.
We cover Kohler Memoirs and Devonshire bath fixtures, Purist and Composed faucets and shower trim, Choreograph shower wall systems with Levity and Rely doors, and Archer and Underscore tubs and shower bases. If your model isn’t on that list, call and we’ll confirm before we quote.
Servicing with genuine Kohler OEM parts by a qualified independent contractor is generally the warranty-safe path; using aftermarket parts on a finish-critical fixture is where risk creeps in. Kohler sets its own warranty terms, so read them yourself and ask us to specify OEM parts on the quote if warranty matters most to you. Call (833) 842-1866 to schedule a free estimate.
The range depends on scope. A Kohler-centric bathroom remodel in Santa Rosa runs $9,000 – $28,000, and a small bathroom remodel runs $5,000 – $12,000. Here’s how the line items break down.
| Scope | Santa Rosa Price Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (833) 842-1866 for an exact quote on your Kohler scope – estimates are free, and the price comes in writing before any work starts.
Book Your Kohler Service in Santa Rosa, CA
Whether you’re chasing a slow drip on a Purist faucet, a seam in a Choreograph wall, or a stained base under an Archer tub, Rowan Construction Group Santa Rosa will diagnose it, quote it in writing, and back the work with the 365-Day Done Right Promise. Call (833) 842-1866 for a free estimate. Free second opinion on any written estimate you bring us.
Written by the team at Rowan Construction Group Santa Rosa.












