A Rowan company - serving Santa Rosa, CA
A home with a brand-new roof and gutters at golden hour
IKO · Santa Rosa

IKO Windows & Doors in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A newly finished roof with a ridge vent and step flashing
A standing-seam metal roof over a covered porch
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
New double-hung windows in a dining room
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

IKO Windows & Doors: The Santa Rosa Owner’s Guide

We install and service IKO-compatible windows and doors across Santa Rosa, and installed whole-window replacement in this market typically runs $4,500 – $15,000 depending on count, frame condition and glazing, while impact-rated units land at $8,000 – $25,000. Same-day service applies to adjustments, hardware swaps, sealing and glazing repairs, not to full replacement, which is a scheduled job with a written price before we start. Most owners discover an IKO failure the same way: a bedroom that was never cold before stays cold after the first real Santa Rosa fog season, or a patio door starts dragging on the sill and the lock no longer lines up without lifting the handle.

Call (833) 842-1866

Rowan Construction Group Santa Rosa is an independent contractor. We are not affiliated with IKO and we don’t manufacture, distribute or speak for IKO. What we can do is read your unit accurately, tell you which part it needs, and put the price in writing. If you also have KraftMaid, Cambria or Silestone work on your list, we handle those on the same written quote.

Key takeaways

  • Whole-window replacement in Santa Rosa: $4,500 – $15,000. Impact-rated: $8,000 – $25,000.
  • Hardware, sealing and glazing work almost always costs a fraction of replacement and is the right first call on a unit under 15 years old.
  • Look for the certification label on the jamb or sash edge, not the marketing sticker on the glass. That’s the label the part number comes from.
  • Our technicians have up to 19 years of experience, and calls are answered by a live person around the clock.

Which IKO Models This Applies To

New architectural shingles with a clean valley

IKO’s residential line is wide, and the part you need is dictated by the series, not by the house. Your identification path runs in this order: the certification or rating label fixed to the jamb or the top sash edge, then the frame dimensions measured at three points (top, middle, bottom – they will differ on any house older than the frame), then the glazing pattern and the operator hardware. Photograph all three before you call anyone. A part matched off a guess is a part that comes back.

The reason to lead with the label is a compatibility gotcha that catches Santa Rosa owners often: tilt-latch and balance assemblies designed for one sash weight series don’t transfer to a heavier impact-rated sash, and the part may seat and lock fine on the bench and fail within a season once the sash starts cycling. Sash weight is the spec range you need to confirm – a heavier unit running a standard balance will not hold an open position.

On the OEM-versus-aftermarket question, we source both ways and we’ll tell you which is honest for your case. OEM hardware is the right answer for anything under warranty or for a mechanism with a specific geometry – latch spacing, tilt-shoe profile, keeper offset. A quality aftermarket balance, sweep or weatherseal is often the same material at a lower number, and for consumables like weatherseal and glazing tape there is no argument for paying OEM. Our sourcing runs across more than fifty vetted brands, and that depth is what keeps the written price on your quote an honest number instead of a padded one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your IKO Windows & Doors Is Failing

  • Drafts or cold spots at the jamb after sunset. Usually a compressed or shrunken weatherseal, or a corner weld that has pulled slightly. If you can see daylight at any point on the perimeter, the seal has failed rather than just aged.
  • A sash that won’t stay up, or drops on its own. The balance assembly has lost tension or the spiral rod has snapped. This is a mechanical failure and it will not improve with use.
  • Condensation between the panes. The insulated glass unit’s seal is gone, which means the argon is gone too. In Santa Rosa’s wet winters and dry summers, that thermal cycling is a real driver of IG unit failure.
  • A patio door that drags, sticks or won’t latch without lifting. Either the roller has flat-spotted or the door has dropped in its frame from settlement. Left alone, the dragging edge wears the threshold and the lock hardware.
  • Fogging, water staining or soft wood at the sill. This is the one to act on first. A sill taking on water is a substrate problem that can move into the framing, and Santa Rosa’s wet season gives it plenty of time to work.

Say what we found, not what we felt about it – that’s how our reports read. You’ll get the condition of the sill, the seal and the balance assembly in plain terms, plus a photo record of each, before any work is authorized.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Window replacement in Santa Rosa runs $4,500 – $15,000. Impact window installation runs $8,000 – $25,000. The range moves on four things: the number of units, whether the frame is sound enough for a pocket or insert install versus a full-frame tear-out, the glazing package (tempered, low-E, impact-rated), and the finish.

Scope Installed price in Santa Rosa
Window replacement (insert or full-frame) $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Single-unit hardware, balance or seal repair Quoted per part, part plus labor, in writing

Every number we give is a flat written price with a written scope and a written workmanship warranty. No change proceeds until you’ve signed a change order – that discipline is why our jobs finish within a few percent of the agreed cost. The quote breaks out parts and labor so you can see what you’re paying for. Bring a competitor’s estimate and we’ll review it line by line at no charge as your free second opinion.

DIY or Call Us?

Some of this work is genuinely safe to handle yourself, and we’d rather you knew which. You can check and clean the weep holes at the sill, replace a worn sweep or weatherseal on a patio door, adjust a roller height with the adjustment screw to stop a light drag, and clear any obstruction from a track. Replacing weatherstrip and re-seating a loose latch plate are also within reach for most owners with a screwdriver and patience.

Where it goes wrong: pulling a sash to get at a balance assembly, resetting an insulated glass unit, and tearing out a frame to cure a water-damaged sill. The balance systems and the heavy impact-rated sash carry real tension, and an assembly that slips under tension can take fingers and glass with it. On a second-floor unit that risks a fall as well. A failed sill is a substrate question underneath the window, which is where an honest inspection beats a web search every time. If we find rot under the frame, the price needs to reflect it before anyone picks up a tool.

Call (833) 842-1866 for a free estimate. Crews are background-checked and uniformed, and you’ll receive a documented photo record of every visit as a standard deliverable – not an add-on – backed by our 365-Day Done Right Promise.

FAQs

A new bay window with a cushioned seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodel

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch