







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
IKO Home Additions & ADU: The Santa Rosa Owner’s Guide
We build IKO-material-compatible home additions and ADUs in Santa Rosa, and most projects land between $45,000 and $130,000 installed for an addition, with full ADUs running $90,000 to $220,000. When people search for an “IKO part” tied to additions, they’ve usually spotted the failure the same way we do on inspections: a roof-to-wall junction on the addition that’s been weeping into the framing, or IKO shingles on the new roof plane that lifted along a valley after a wet winter. Santa Rosa sits in a climate that swings from soaked to baked in a single season, so the junction details and the roof underlayment matter more than the finish coat. We quote the whole scope in writing before a tool comes off the rack.
Rowan Construction Group Santa Rosa is an independent contractor. We’re not affiliated with IKO, but we know their product lines well enough to spec the right system and tell you when something else fits your build better.
Key Takeaways
- Addition projects in Santa Rosa typically run $45,000 – $130,000; ADUs run $90,000 – $220,000.
- IKO roofing accessories, flashing and underlayment fail at transitions first, not in the field of the roof.
- Every project gets a flat written price, a documented photo record, and a written warranty under The Haven Standard.
- You get a free second opinion on any written estimate from another contractor, reviewed line by line.
Which IKO Models This Applies To

IKO’s product catalog splits into two worlds that both show up on an addition or ADU: the roofing system (shingle lines like Cambridge and Dynasty, plus underlayment and accessory flashing) and the building envelope pieces that seal the new structure to the existing house. Cambridge is a three-tab-class product with a narrower exposure; Dynasty is a heavier laminated shingle with a deeper shadow line. The part that matters most on an addition isn’t usually the shingle face – it’s the step flashing, the ice-and-water membrane at the low-slope transition, and the drip edge that runs the new roofline.
To identify what you have, check the bundle wrapper or the attic-side of any leftover shingle for the IKO print line, which names the series and the color. Measure the shingle tab exposure – standard three-tab runs about 5 inches, laminated products vary. On the addition roof, look at the wall where it meets the new framing: that’s where the compatibility call gets made, and where we see mismatched flashing more than anything else.
IKO’s own accessory flashing and membrane products are spec-matched to their shingle systems, but a quality aftermarket membrane from a name like GAF or Owens Corning will perform fine if it’s rated for the slope and the local climate. We’d rather spec the right membrane grade for Santa Rosa’s wet winters than force a brand match that doesn’t fit the roof pitch. That’s the honest OEM-versus-aftermarket decision for you.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your IKO Home Additions & ADU Is Failing
Failures on an addition or ADU rarely announce themselves. They show up as a stain three rooms away from the actual leak. Here’s what we look for:
- Water staining on the ceiling near the addition’s interior wall. The cause is a failed step flashing at the roof-to-wall junction, where the new roof meets the existing house. Santa Rosa’s winter rain finds the gap in a single storm cycle.
- Shingle granule loss concentrated along a valley or ridge. This points to a bonding or ventilation problem on the new roof plane, not the shingle itself. Heat build-up from an under-vented addition attic accelerates wear on IKO laminated products.
- Peeling or bubbling paint on the addition’s exterior wall. Moisture is migrating behind the siding, usually from a missing or improperly lapped housewrap at the transition point. By the time paint lifts, the sheathing has been damp for a season.
- A soft spot or deflection in the addition floor. This is a structural signal, not a roofing one, and it means the subfloor or the connection to the main house framing needs a look before anything cosmetic.
- Musty smell inside an ADU or addition after rain. That’s trapped moisture, and it usually traces to the roof-to-wall detail or a poorly sealed window flange on the new wall. An ADU’s smaller footprint makes a small leak a big problem faster.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Santa Rosa, a home addition runs $45,000 – $130,000 installed, and a full ADU build runs $90,000 – $220,000. Those ranges cover the whole scope, not just a patch part, because repairs to an addition’s failing envelope usually reveal framing or sheathing damage underneath.
What moves the number within that range: the square footage of the addition, whether the site needs foundation work, the roof pitch and how many transitions between old and new roof planes, and whether the ADU needs a separate utility meter. The range also accounts for the permit and inspection cycle, which in Santa Rosa’s climate and code environment is where a lot of contractors pad numbers. We don’t.
- Written scope and flat price before any work starts. No “call for a quote.”
- Documented photo record on every visit – what we found, what we did, included as standard.
- Written warranty and the 365-Day Done Right Promise: if it isn’t done right, we make it right.
- Signed change orders for any scope change, so the final cost stays within a few percent of the agreed price.
We also work across other brands – KraftMaid, Cambria and Silestone – for the finishes inside the addition, so the written quote reflects real material costs rather than padded allowances.
DIY or Call Us?
Some of this you can safely check yourself. Walk the interior of the addition during a heavy rain and look for active drips or darkening on the ceiling. Check the attic side of the new roof plane for damp sheathing or daylight. Look at the flashing at the roof-to-wall junction – if it’s lifted, rusted, or lapped the wrong way, that’s the source.
What you shouldn’t do yourself: pull shingles to inspect the underlayment, cut into the addition’s soffit to trace a leak, or repack the flashing at a wall transition. That work sits above your head and below your insurance policy, and a bad flashing repair on a Santa Rosa addition will cost more to undo than to have done right. Our technicians have up to 19 years of experience on these transitions, and they carry the documentation with them.
Call (833) 842-1866 for a free estimate – a written price, a walk of the actual condition, and a photo record you keep.
FAQs

Seven to fifteen years is realistic for the shingle layer in Santa Rosa’s climate, but the flashings and membrane at transitions need inspection every couple of years regardless. Heat and wet cycles age the accessories faster than the shingle face. Call (833) 842-1866 to schedule a free inspection.
Usually yes, if the damage hasn’t reached the sheathing or framing. A flashing and membrane repair at the roof-to-wall junction is common and far less expensive than a new roof plane. We’ll tell you honestly what the evidence shows. Call for a free estimate – we’ll walk you through the photo record.
Three to six months is typical for an addition in Santa Rosa; a full ADU often runs four to eight months depending on site work and the permit timeline. We give you a written schedule with the written price. Call (833) 842-1866 for a project-specific timeline.
We source through our vetted supplier network, which is why the quote carries honest numbers, and we spec the right product grade for your roof pitch and climate rather than the nearest match on the shelf. Bring a competitor’s written estimate and we’ll review it line by line at no charge. Call (833) 842-1866 to get started.
When you’re ready to know what your addition or ADU actually costs, call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. You’ll get a flat written price, a written scope, and a documented photo record – before anyone starts a thing.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












