







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Roofing: The Santa Rosa Owner’s Guide
Roofing tied to an ECO Window Systems project in Santa Rosa is quoted as a flat written price before any work starts: roof repair typically runs $400 – $1,800, full roof replacement $8,000 – $20,000, and metal roof installation $15,000 – $40,000. We schedule planned replacements like an install, not an emergency call: estimates are free and the written scope arrives before a crew is dispatched. Most owners find out something is wrong when an ECO Window Systems flash-and-seal detail above a window starts letting water in, when ceiling stains appear in the room below after the first real rain, or when granules start collecting in the gutter downspouts. Everything below assumes that invoice or warranty document is in your hand. We’re an independent provider in Santa Rosa, not affiliated with ECO Window Systems.
Key takeaways:
- Repair runs $400 – $1,800; replacement $8,000 – $20,000; metal $15,000 – $40,000. Written flat price upfront.
- Bring your ECO Window Systems paperwork. The integration details change what “the right part” means.
- The failing piece is almost always the flashing or seal at the window-to-roof junction, not the field shingles.
- No change proceeds until you sign a change order. Under Clause 1 of the Haven Standard, the price is written before anyone starts.
Which ECO Window Systems Models This Applies To

ECO Window Systems focuses on vinyl and impact-rated window and door lines, and the roofing that fails first on these homes isn’t the ECO product itself: it’s the weather integration built around it. When a window or sliding door was set into a wall, the roofer and the window installer shared one job: sealing the transition between the head, jamb and sill and the roof plane above. On a typical Santa Rosa Ranch or 1950s bungalow in the Junior College area or along the older blocks of Montgomery Village, that transition is often a siding-to-roof kickout, a head flashing over a projecting window, or a sill pan behind a door that opens onto a covered patio. Identify what you have by measuring: the width and height of the exposed head flashing, the sill pan depth, and the exterior trim profile. Then note the rough opening dimension on the window’s rating label. That label identifies the window series; the opening and flashing measurements identify the roofing piece.
OEM versus aftermarket is a real decision here. For the window-to-roof flashing and sealants, a quality aftermarket flashing assembly matched to the measured opening is often the better value and the better fit, because ECO Window Systems parts are specified to the window frame, not to the roof pitch. For the roofing field itself, matching the existing shingle profile and layer count matters more than the brand on the wrapper. GAF and Owens Corning shingles are the two we quote most in Santa Rosa, and both come with written material warranties you keep.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ECO Window Systems Roofing Is Failing
- Water staining on the interior wall below a window or patio door. The head flashing or kickout has failed and is letting water travel behind the siding, so the stain often shows up a foot or two away from the window rather than under it.
- Granules in the gutter or on the walkway after wind. Shingle surfaces near the window head have lost their protective layer and are nearing end of life, which is what exposes the flashing detail underneath.
- Lifted or curled shingle tabs above the window. Heat from the window assembly plus the roof surface at a low slope drives early cupping, and in a low-pitch section the shingles can’t shed water once the tabs lift.
- Visible cracking or pulling away of the sealant bead at the window head or jamb. The caulk or seal between the window frame and the roof or siding has aged out. This is the single most common call we get.
- Daylight or a draft at the top corner of the window during rain. The flashing isn’t just weatherproofing, it’s the bridge between the window opening and the roof; when it gaps, air and water both get in.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Santa Rosa, roofing work tied to ECO Window Systems openings falls into predictable bands. A targeted repair on the flashing, seal or local shingle section runs $400 – $1,800. A full roof replacement on the affected slope or roof runs $8,000 – $20,000, and a metal roof installation, which some owners choose for the low-maintenance lifetime and the cleaner window-to-roof detail, runs $15,000 – $40,000. What moves the number is the slope and pitch, the number of layer tear-offs (a roof with two shingle layers costs more to strip than one), access, and whether the window head flashing needs to be custom-fabricated to match the measured opening rather than an off-the-shelf piece. The second layer matters: Santa Rosa roofs built before the 1990s often carry two shingle layers, and we tell you up front whether that second layer needs to come off.
What’s included: a written line-item quote, a written scope, a written warranty, and no change order signed without your approval. The 365-Day Done Right Promise covers the work, and every visit comes with a documented photo record of what was found and what was done.
DIY or Call Us?
Some of this is safe to check yourself. Look for granules in the gutter, run a hand along the window head flashing to feel for a gap, and photograph any staining on the interior wall so you can show the pattern. What’s not safe to do yourself is the roof-level work. The flashing integration above a window involves working at height, on a pitch, often with a low-slope section that looks walkable and isn’t. A mis-set flashing can leak behind the siding for months before it shows indoors, and a fall from a Santa Rosa roof is a serious injury. That’s the honest line.
If you’re seeing staining or a gap at the window head, call (833) 842-1866 and we’ll send an estimator out with a written price. Estimates are free, and if you have a competitor’s written estimate, we’ll review it line by line at no charge.
FAQs

A standard asphalt shingle roof in Santa Rosa typically lasts 20 – 30 years, and a metal roof can go 40 – 50 years or more. What shortens that on ECO Window Systems homes specifically is the window-to-roof transition: the seal and flashing at those openings are the first things to fail, usually well before the roof’s serviceable life is up. Call (833) 842-1866 for an exact quote; estimates are free.
Often yes. If the failure is confined to the flashing or seal at a window or door, a targeted repair at $400 – $1,800 is usually enough, and it’s the honest recommendation when the field shingles are sound. If the shingles are curling, granule loss is advanced, or there’s already a second shingle layer, replacement is the better long-term call. We’ll tell you which one you’re in and put the number in writing before any work starts.
A targeted flashing or seal repair is usually a single visit. A full roof replacement in Santa Rosa typically runs a few days to about a week depending on roof size, pitch, and how many layers need stripping. Because this is planned work, not an emergency, we give you a scheduled start and a written scope rather than a same-day dispatch.
We start with the measurements from your roof: the exposed head flashing width and depth, the sill pan, the trim profile, and the rough opening from the window’s rating label. Then we source the flashing and roofing to match. We don’t carry parts on a truck and we don’t stock ECO Window Systems parts, so we order what the job actually needs rather than substituting whatever is closest. That’s why the first step is the measurement, not the van.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












