A Rowan company - serving Santa Rosa, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
E
ECO Window Systems · Santa Rosa

ECO Window Systems Bathroom Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A freestanding soaking tub in a remodeled primary bathroom
A walk-in shower with large-format tile and a built-in niche
A remodeled hall bathroom with subway tile and a floating vanity
A new paver patio with a seat wall and fire pit
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
New double-hung windows in a dining room
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

ECO Window Systems Bathroom Remodeling: The Santa Rosa Owner’s Guide

ECO Window Systems doesn’t manufacture bathroom remodeling parts. The name on the window, the door unit, or the glazing spec is a building-product label; the parts inside a bathroom remodel come from plumbing, tile, cabinetry and fixture manufacturers. So when a Santa Rosa homeowner calls us about a failed ECO Window Systems item in a bath project, the first answer is architectural: we match the replacement part to what’s actually installed in your bathroom, and we do it with the written price in hand. Bathroom remodels in Santa Rosa run $9,000 – $28,000 for a full rebuild and $5,000 – $12,000 for a small bath. We’re an independent service provider and not affiliated with ECO Window Systems, so we have no brand loyalty to protect and no reason to steer you toward a part that doesn’t fit.

Call (833) 842-1866

Owners usually discover a problem in stages. First the caulk line at the tub or shower base fails. Then the substrate behind the tile starts to move. Then a tear-out reveals that the previous install used the wrong membrane and the wrong backer board, and the whole bath is coming out. By the time the second contractor sees it, the conversation shifts from “replace a part” to “rebuild the wet zone.” Our technicians have up to 19 years of experience reading those failures, and we’ve seen them in every Santa Rosa housing era from the 1920s bungalows near Cherry Street to the newer construction out in Fountaingrove.

Which ECO Window Systems Models This Applies To

A tile setter installing wall tile in a shower

Every ECO Window Systems bathroom part we see in Santa Rosa lands in one of four categories, and each has a different compatibility question.

Bath window units and glazing

ECO window units installed in bathrooms are the most common “ECO Window Systems” match we handle. Identify the series from the sticker on the jamb or the interior frame rail (usually a small label with the model code and a manufacture date). If the label is gone, measure the visible glass from the interior stop to the interior stop, not from the exterior edge – the exterior trim adds 1/2 to 3/4 inch and a remeasure from outside will overshoot the rough opening by that much, which is the compatibility gotcha most Santa Rosa owners hit.

Shower surrounds and panel systems

Fiberglass and acrylic surrounds that carry the ECO Window Systems label use proprietary panel profiles. A universal 3-piece surround from a big-box store will not seat into an ECO channel without a modified corner trim and a different adhesive. We match the panel to the existing profile or, when the profile is discontinued, we replace the whole surround as a unit and document the change in the photo record.

Mirror and vanity glass components

Cut-to-size mirror and vanity glass panels are interchangeable across manufacturers – the thickness (typically 1/4-inch for bath mirrors) and the edge profile (flat polish vs. bevel) are the only real specs. Any glass shop can cut a replacement.

OEM or aftermarket

For window and shower-surround components, aftermarket equivalents from a reputable US manufacturer match spec at 20 to 40 percent below the OEM part, and they carry the same warranty on the unit. For anything structural to the wet zone – membrane, backer board, drain assembly, waterproofing – we don’t downgrade. OEM spec or better, always, because a $60 savings on a drain assembly costs $4,000 in floor repair two winters later.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your ECO Window Systems Bathroom Remodeling Is Failing

  • Caulk or grout cracking at the tub/tile junction. The substrate is moving or the joint was filled instead of caulked. Flexible caulk is the correct material at every inside corner; grout in the same spot is a symptom of a fast install.
  • Soft spots or a hollow sound when you tap the floor near the shower. Water has reached the backer board and the board has lost its integrity. By the time you hear it with a knuckle, the subfloor has started to move too.
  • Musty smell that returns a week after cleaning. The waterproofing membrane has failed beneath the tile, and the smell is mildew in the setting bed. A Santa Rosa bathroom without a mechanical exhaust running long enough, or without a window that actually opens, will grow this faster than the rest of the Bay Area.
  • Peeling paint on the wall behind or beside the shower. That’s water vapor escaping through a failed vapor barrier, not a paint problem. Repainting over it without addressing the barrier delays the failure by one heating season at most.
  • Window fogging between panes or water pooling on the sill inside the bath. If your ECO window unit has lost its seal, moisture sits at the sill, wicks into the rough jamb, and starts the wet-zone damage from outside the tile line. This is the failure most Santa Rosa owners write off as “condensation.”
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new curved paver walkway to the front porch

Here are the installed ranges we quote in Santa Rosa, written flat with a written scope before anyone picks up a tool:

Scope Installed Price
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What pushes you to the top of a range: membrane and backer-board replacement, plumbing relocations in the wet wall, and window or shower-surround swap-outs that require matching a discontinued ECO Window Systems profile. What keeps you low: sound substrate, no plumbing moves, and a same-footprint fixture swap. Fixtures from Kohler and Toto, cabinetry from KraftMaid and Wellborn, and tops from Cambria, Caesarstone and Silestone all sit inside these ranges. Every quote is a flat price with a written warranty, and no change proceeds without a signed change order – that’s Clause 1 of the Haven Standard, and it’s why our projects finish within a few percent of the agreed number.

DIY or Call Us?

An owner can safely check a few things. Measure the bath window rough opening from the interior stop to the interior stop. Photograph the model sticker on the jamb, the shower profile, and the vanity tag. Look for soft spots under the tile with a knuckle. Trace any water stain to its source. What you should not do yourself is the wet-zone work: membrane installation, drainage changes, and any electrical circuit added near a tub or shower. A failed waterproofing membrane behind a wall you can’t see costs $3,000 to $9,000 to correct, and it takes weeks to discover. Shower valves and tub drains in this climate fail with no warning, and a leak you don’t catch in the first week can mean the subfloor comes out. Call (833) 842-1866 for a free written estimate – bring a competitor’s quote and we’ll review it line by line at no charge.

FAQs

A galley kitchen opened up to the dining room with a new peninsula

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled kitchen with a waterfall island and wood cabinetsA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver pool deck

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch