







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Santa Rosa Owner’s Guide
If your Dvele home’s kitchen needs new cabinets, counters, or a full layout change, a Dvele-specific kitchen remodel in Santa Rosa runs $14,000 to $45,000 installed, and we quote it as a flat written price before work begins. We’re an independent contractor and not affiliated with Dvele, but we know the prefab wall and MEP (mechanical, electrical, plumbing) chase layout these homes ship with, which is where most generic remodelers get stuck. Owners usually call after a cabinet box starts pulling from the wall track, a countertop seam opens over the island, or a remodeler they hired quoted a price that ballooned once the crew found the factory wiring inside a partition.
Which Dvele Models This Applies To

Dvele builds its homes around modular, panelized wall systems and a predictable interior fit-out, and the kitchen is the piece that gets changed most often after move-in. The models we see in Santa Rosa, CA, most often are the single-story and two-story platform homes delivered through the last several years, and the kitchen cabinetry and appliance rough-ins follow the same logic across them: standardized cabinet depths, a service chase behind the range wall, and knock-outs for venting and plumbing that a remodel has to line up with or cut fresh. To identify what you have, look for the panel schedule and appliance spec sheet in the homeowner packet Dvele provided at close, and check the data plate on any appliance you’re keeping. Those two documents tell a crew more than a hundred photos will.
On the OEM-versus-aftermarket question: Dvele doesn’t manufacture cabinets or countertops. The cabinets are typically a production cabinet line and the counters are usually quartz slab, so replacement is a matter of matching the box spec and the stone, not chasing a proprietary part number. That’s good news for your budget. It also means a contractor who says “we can only use the original supplier” is either misinformed or marking up. We source through the same lines the factory used and through a deep bench of vetted brands. Kitchen work here runs through KraftMaid and Wellborn for cabinets, Cambria and Caesarstone for counters, with Silestone as a solid quartz alternative when the color match is close enough to justify it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
Prefab and panelized homes age differently than stick-built, and the kitchen is where the difference shows first. Here’s what we find on Santa Rosa inspections, and what’s actually causing it.
- Cabinet boxes pulling away from the wall. Screws backing out of a panelized wall typically means the fasteners missed the structural stud line inside the panel. The fix is locating the stud line with a scan and re-anchoring to it, not adding more screws in the same spot.
- Countertop seams opening at the island or peninsula. That’s usually movement in the substrate, not a bad glue joint. The cabinet run wasn’t shimmed level to the floor, so the stone is carrying load it shouldn’t. Setting the base flat and re-lapping the seam fixes it for good.
- Water staining at the sink base or dishwasher cavity. The factory knock-out for the supply and drain lines is a common leak point when the escutcheon isn’t sealed. Look for a dark ring on the cabinet floor; that’s slow seepage, not a one-time spill.
- Range hood venting that smells like the attic or wall cavity. On these homes the vent chase runs through the service wall, and if the transition collar wasn’t taped it pulls air from the wrong place. You’ll smell it most on a hot Santa Rosa afternoon.
- Doors and drawers that rub only in summer. This is humidity swing, and it’s a real thing in Sonoma County’s dry-season, cool-night pattern. Wood cabinet boxes move, and a poorly adjusted hinge will drag for a few months a year. Adjusting the hinge and adding a dehumidifier in the cavity often solves it without replacement.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Santa Rosa, a kitchen remodel runs $14,000 to $45,000 installed. A small kitchen remodel lands at $9,000 to $20,000. Breaking it out line by line the way we write our quotes: cabinet installation runs $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000. Those ranges are the honest market numbers for this city, and we’ll show you where your specific job lands before anyone touches a tool.
What drives the range is scope, not salesmanship. Cabinet count and door style, whether the layout changes (which means moving the service chase and re-permitting), whether the flooring and drywall have to come up, and stone selection all move the number. The quote you get from us is a flat written price with a written scope and a written warranty. If something unexpected turns up, no work proceeds on that change until you sign a change order. That discipline is why our projects finish within a few percent of the agreed price, and it’s printed on every page under the 365-Day Done Right Promise, backed by the Haven Standard.
DIY or Call Us?
You can safely handle the diagnosis. Pull the appliance spec sheet, photograph the cabinet anchor points, check for water staining under the sink, and note which doors rub. Measuring your cabinet openings and reading the data plate on the range or hood tells us exactly what fits, and that’s useful homework.
Where DIY goes wrong on a Dvele home is at the wall. Re-anchoring cabinets to a panelized wall without a stud scan risks punching through the panel’s interior membrane. Cutting a new vent or plumbing knock-out into a service chase means you’re working around concealed wiring and gas lines, and that’s not a job for a homeowner with a reciprocating saw. If your remodel involves moving the range, the sink, or any gas appliance, stop and call a licensed professional. We send background-checked, uniformed technicians, and every visit includes a documented photo record as a standard deliverable, so you see what we found and what we did.
Call (833) 842-1866 to schedule your free estimate, or bring us any written quote you’ve already got and we’ll review it line by line at no charge as a free second opinion.
FAQs

A typical Dvele kitchen remodel takes 3 to 6 weeks from demolition to final walkthrough, and a cabinet-only swap usually runs 3 to 5 days. The timeline stretches when the layout changes and we have to pull permits and get inspection sign-off, which we handle as part of the job. Call (833) 842-1866 for a free estimate and a written schedule that fits your specific scope.
Yes. We pull the permits and manage the inspections for any Dvele kitchen work that changes the layout, moves plumbing or gas, or touches the electrical system. That includes the panel modifications these homes often need when a new appliance draws more than the original circuit allows. Call (833) 842-1866 and we’ll tell you exactly which permits your scope requires before you sign anything.
No, not without your signature. Under the Haven Standard, the price is a flat written number with a written scope, and no work proceeds on a change until you sign a change order. If we open a wall and find something the original scope couldn’t have predicted, we stop, show you, and write the change before anyone continues. That’s been the discipline across thousands of jobs and it’s why costs land within a few percent of the agreed price. Call (833) 842-1866 for your free estimate.
We source through the same production cabinet lines and quartz suppliers Dvele uses on these homes, plus a bench of fifty-plus vetted brands, so the fit is right and the price is honest rather than marked up for a “factory part.” Cabinet lines we work with include KraftMaid and Wellborn; counters run through Cambria, Caesarstone, and Silestone. We check your homeowner packet and appliance data plate first, then quote the exact spec. Call (833) 842-1866 to schedule your free estimate.
Call (833) 842-1866 to schedule your free estimate with Rowan Construction Group Santa Rosa. You’ll get a flat written price, a written scope, a written warranty, and a documented photo record of every visit, all before anyone picks up a tool.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












