







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Petaluma, CA
We provide independent CWS service across Petaluma, from the pre-1906 riverfront core to the newer east-side subdivisions off Maria Drive. What makes CWS work different here is the building stock: CWS cabinets and countertops going into Victorian and lath-and-plaster walls that are rarely plumb, in a town whose historic downtown floods more often than the FEMA maps show. Call (833) 842-1866 and we’ll walk your project before anyone orders a box. Estimates are free, and the price comes in writing.
Why Petaluma Residents Choose Us for CWS Service

We work on CWS cabinetry often enough to know where the line fails in Petaluma specifically. CWS Coventry assembled oak and Hartford shaker-style maple cabinets hold up well when they’re installed flat and blocked into studs. They don’t hold up when a stock box is hung on a bowed plaster wall or set with no blocking behind it. We check walls and floors for level and moisture before a single cabinet goes up.
We’re an independent provider, not manufacturer-affiliated and not an authorized CWS dealer. That independence is useful: we spec CWS boxes where the budget calls for it, bring in CWS-spec hinges and drawer slides so reveals and finishes stay consistent, and tell you plainly when a rebuild beats a replacement. Every job comes with background-checked, uniformed technicians, a live person answering calls 24/7, a documented photo record on every visit, and the 365-Day Done Right Promise. The full CWS service scope runs across all our covered trades in the Petaluma service area.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Petaluma
- Swollen sink bases and toe kicks. Petaluma’s wet winters push humidity into particleboard and MDF, especially under sinks where a slow leak goes unnoticed for months. The panel crushes, and door reveals drift out of line. We find these on east-side ranch homes more than anywhere.
- Racked doors on out-of-plumb plaster. Face-frame screws and hinge plates pull loose when CWS cabinets go up against lath walls in the pre-1906 west-side core. Doors start to rub, then rack. The fix is blocking and shimming into studs, not a new door.
- Peeling thermofoil on sun-facing runs. Petaluma’s hot, dry summer afternoons blister laminate and thermofoil door skins on south- and west-facing cabinet runs. We assess whether the skin can be re-faced or the front replaced with a CWS-matching door.
- Upper cabinets pulling away. Stock CWS boxes installed without blocking behind older wall finishes will sag or separate at the joints once loaded. It usually surfaces only when the cabinet starts to move. We check attachment points before adding weight above.
- Joints opening at season changes. CWS joints that were tight in a dry September will open as winter moisture moves through the cabinet boxes. Tighter fastener schedules and moisture-tolerant materials at the base help here.
CWS Service in Petaluma: What Local Conditions Mean for Your Equipment
The tidal Petaluma River floods the downtown core more often than the official FEMA maps admit, and that changes how CWS cabinets and countertops should be built in the historic district. Pre-1906 buildings on the river side of Petaluma Boulevard routinely see water at the base of the casework during winter storms. So the wet-side of a downtown Petaluma kitchen usually gets raised, moisture-tolerant bases and non-swell substrates like plywood or sealed MDF even when code doesn’t demand it. Standard particleboard CWS boxes on a slab-on-grade floor in that core are a short-lived arrangement. Up on the east-side hills, where the soil drains and the seismic rules still bite, the same cabinet handles the job fine with proper blocking. The material decision follows the water table, not the showroom.
CWS Models & Products We Service in Petaluma
We work with CWS Coventry assembled oak kitchen cabinets, Hartford shaker-style maple cabinets, Brookhaven raised-panel bath and vanity cabinets, and the ready-to-assemble in-stock white thermofoil line. Each has its own tolerances and finish-matching approach, and we keep those straight when we order replacement fronts. For replacements we use CWS-spec hinges, drawer slides and matching doors so reveals and finishes stay consistent. Quality aftermarket hardware comes in for function upgrades, not appearance. We don’t keep local stock; parts are sourced per job after we’ve measured the opening and confirmed what’s actually there.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Petaluma

You get a flat written price with a written scope before any work starts, and no change proceeds without a signed change order. Here’s what CWS cabinet and countertop work typically runs in the Petaluma market:
| Service | Price Range |
|---|---|
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
What drives the number: how much of the existing layout stays, whether the walls need blocking or furring, moisture-tolerant substrate decisions in the historic core, and the countertop material. A free estimate includes the wall and floor check, moisture reading, and a written line-item scope. Call (833) 842-1866 to schedule yours.
Serving Petaluma, CA – Our Local Coverage Area
We serve Petaluma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Petaluma
Can my Petaluma kitchen keep its existing CWS cabinet layout if the boxes are water-damaged? Usually yes. If the doors, drawer fronts and layout are workable, we replace the compromised boxes with moisture-tolerant units and re-set the existing fronts, keeping the layout you already know. A water-damaged particleboard carcass is the exception, and it’s usually a replace call. Call (833) 842-1866 for an exact quote, estimates are free.
Do CWS cabinets need special handling in Petaluma’s historic downtown core? Yes. The pre-1906 buildings on flood-prone ground call for raised, moisture-tolerant bases and careful blocking into older wall finishes. Non-swell substrates are common even where code doesn’t require them. Call (833) 842-1866 and we’ll check what’s under your floor and behind your wall before we quote.
How do Petaluma’s seismic rules affect CWS cabinet and countertop installation? They mean the cabinet has to be anchored into studs and blocking, not just into the wall finish, and heavy stone countertops need proper support at the base. We plan attachment points before the countertop template is taken. Call (833) 842-1866 to schedule a check.
Will new quartz or granite countertops fit on my existing CWS cabinets? Often yes, but only if the runs are true. We reset doors and drawer fronts and confirm level before the template so the quartz or granite lands on a flat surface. Out-of-level runs are corrected first. Call (833) 842-1866 for a free estimate.
What’s the realistic budget range for a CWS cabinet-and-countertop update in Petaluma? Cabinet installation runs $4,000 – $13,000 and countertop installation $2,000 – $6,500; a full kitchen remodel runs $14,000 – $45,000. The historic core and moisture-tolerant work sit at the upper end. Call (833) 842-1866 for an exact quote, estimates are free.
Service Areas Near Petaluma
We also work on CWS projects in Rohnert Park, Sonoma, Santa Rosa, Novato and Napa, along with the rest of the Petaluma valley. If you’re just over the county line, we can still help. Call to confirm coverage for your address.
Book Your CWS Service in Petaluma Today
Free second opinion on any written estimate you’re holding, line by line, no charge. Call (833) 842-1866 to schedule your free estimate for CWS cabinet and countertop work in Petaluma. A live person answers, and the price comes in writing before anyone picks up a tool.
Written by the team at Rowan Construction Group Santa Rosa.












