







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Santa Rosa Homeowners Choose CGI Construction
Rowan Construction Group Santa Rosa provides independent CGI construction service in Santa Rosa: cabinet installation, quartz countertop work, vanity top replacement, and tub-to-shower conversions, quoted at a flat written price before anyone picks up a tool. What sets our CGI work apart is diagnostic familiarity. Our technicians have handled CGI frameless and Shaker cabinetry and CGI quartz in enough Santa Rosa homes to know how these products actually behave here, not how they read on a spec sheet. We’re an independent service provider. We are not affiliated with or authorized by CGI, and we don’t imply otherwise. The city’s fire-hardening permit cycles and dry-season humidity swings put specific stresses on cabinetry and countertops, and that’s where our CGI work earns its keep. Call (833) 842-1866 for a free estimate.
Why Trust Rowan Construction Group Santa Rosa for Your CGI Construction?

Our technicians have up to 19 years of experience, and a good share of it has been spent inside CGI cabinet boxes and under CGI quartz slabs. That matters because frameless European cabinetry and engineered quartz fail in ways that a general carpenter may recognize but not diagnose. A door that hangs crooked is a hinge problem, a swelling problem, or a racking problem, and each one calls for a different fix and a different price.
We source CGI OEM hinges, drawer slides, and touch-up finishes whenever they’re available, because OEM hardware preserves the fit and the finish match. When a component is discontinued, we use quality aftermarket equivalents and say so in writing before the work starts. Every CGI service call is warranty-safe: we don’t drill, cut, or modify a cabinet or countertop in a way that would give CGI grounds to deny a claim, and we put that commitment in the scope.
Under Clause 1 of The Haven Standard, the price is written before anyone starts. No change proceeds without a signed change order. Crews are background-checked and uniformed, calls are answered by a live person 24/7, and every visit ends with a documented photo record of what we found and what we did. The 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. And if you want a second set of eyes on a competitor’s CGI estimate, we’ll review it line by line at no charge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Santa Rosa
CGI products are well made. Most of what we repair in Santa Rosa isn’t a manufacturing defect; it’s what a Mediterranean climate with bone-dry summers and hot, gusty autumn winds does to wood-core cabinetry, plus the ordinary wear of a working kitchen. These are the five patterns we see most.
- Sagging or misaligned doors on CGI Euro-style frameless cabinets. Frameless boxes rely on the hinge plate and the panel edge for their alignment, with no face frame to hide error. When hinges fatigue, doors drift out of plane and start rubbing. In Santa Rosa, the bigger culprit is usually moisture: a dishwasher or sink leak swells the particleboard core, the hinge screws lose their bite, and the door sags no matter how many times you adjust it. The fix depends on whether the swelling is local or has spread through the box.
- Hairline cracks in CGI quartz near sink cutouts or overhangs. Quartz is strong in compression and surprisingly unforgiving in flex. A cutout for an undermount sink removes material exactly where the slab needs it most, and an overhang beyond about a third of the slab’s depth without corbels or a steel support puts a bending load on the weakest section. Cracks usually start at the cutout corner. That’s a support problem, not a bad slab, and the repair has to address both.
- Finish peeling or chipping at joints on CGI Shaker cabinets. Painted and foil-wrapped Shaker fronts move with humidity. Santa Rosa’s swing from wet winter to parched summer works the joints, and repeated wiping with harsh cleaners accelerates it. Blistering near the dishwasher or range is a tell that moisture or heat, not cleaner, is the driver.
- A CGI vanity top separating from the cabinet base. Vanity tops lift when the adhesive bead was too thin or when water gets behind the backsplash and swells the cabinet’s top rail. Once the top is loose, water finds the seam every time someone uses the sink, and the separation widens.
- Drawer slides that bind or self-open. On CGI frameless cabinets, a slide that binds usually means the box is out of square from settling or moisture, not that the slide failed. We check the box before we replace hardware, because a new slide in a racked cabinet will bind too.
CGI Parts & Our Repair-vs-Replace Approach

Parts come from the manufacturer or an approved supplier for each job. We don’t claim to stock CGI parts locally, and we won’t tell you we do. When you book a CGI service call, we identify the specific model or series, confirm what hardware it takes, and order it. That’s a day or two on most jobs.
OEM first is our default for hinges, slides, and touch-up finishes, because a hinge that matches the original keeps the door reveal even and the warranty intact. If CGI has discontinued a component, a quality aftermarket equivalent is fine, and we’ll name the part in the written scope so there’s no mystery later.
The repair-or-replace call is honest and specific. CGI cabinets and countertops are usually repairable when the substrate is sound: hinges and slides swap cleanly, a hairline quartz crack can be stabilized once the support is corrected, and a lifting vanity top can be reset with proper adhesive and a flashing detail. We recommend replacement when the particleboard core has swollen through the box, or when a countertop has multiple cracks radiating from more than one point. At that stage, patching is money spent on a problem that keeps coming back.
Call (833) 842-1866 and we’ll give you a written price on both paths so you can compare them side by side. Estimates are free.
Our CGI Service Process – Step by Step
Here’s what a typical CGI job looks like with us, start to finish.
- 1
Diagnosis. We open the cabinet, check the box for square and moisture, test the hinge plates, and look at the countertop’s support and cutout corners. We photograph everything. A common scenario: a homeowner notices several CGI frameless cabinet doors no longer close flush and the finish is blistering near the dishwasher. The usual cause is moisture swelling the particleboard core and fatigued hinges. We confirm the extent of the swelling before recommending anything.
- 2
Written scope and price. You get a flat written price, the exact parts list (OEM or named aftermarket), and the repair-or-replace recommendation with the reasoning. No work starts until you approve it.
- 3
Repair or install. We replace damaged hinges and slides with OEM or equal hardware, correct the countertop support before any crack repair, and reset vanity tops with proper adhesive and a water detail at the back edge. If a full replacement is the right call, we scope cabinet installation, countertop installation, and backsplash as one job.
- 4
Test and warranty. Doors are adjusted and cycled. Drawers open and close under load. The countertop is checked for flex. We hand you the photo record and the written warranty, and the 365-Day Done Right Promise covers the work.
See the difference
Before
After
Before
After
Before
AfterCGI Products We Service & Install in Santa Rosa
We work across the CGI lines that show up in Santa Rosa kitchens and baths: Euro-style frameless cabinets, Shaker-style cabinets, quartz countertops, and vanity tops. On the installation side that covers full cabinet installation, quartz and granite countertop fabrication and setting, backsplash, bathroom vanity installation, and tub-to-shower conversion when a bath is being reworked around new surfaces. We handle projects in the mid-century ranch homes of Coffey Park and Roseland as readily as the 1970s-80s hillside contemporaries in Rincon Valley, where out-of-square walls and settled floors are part of the measurements.
We Also Service These Brands
CGI is one of more than fifty vetted brands we work with. We also install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone quartz alongside CGI quartz, and Kohler and Toto fixtures. That range matters on a real job: when a client wants a Cambria island paired with CGI perimeter cabinets, we quote both in one scope instead of sending you to a second contractor.
FAQs – CGI Construction Service in Santa Rosa

No. We are an independent CGI service provider and are not affiliated with or authorized by CGI. We work on CGI products because our technicians know them well, not because the manufacturer endorses us. Any contractor claiming official CGI authorization should be able to produce documentation on request. Call (833) 842-1866 with questions about how we work.
Yes, whenever they’re available. We source CGI OEM hinges, drawer slides, and touch-up finishes to preserve fit and finish. When a component has been discontinued, we use a quality aftermarket equivalent and name the part in the written scope before work starts. You’ll always know which parts are going in.
Most CGI cabinet and countertop repairs are completed in a single visit once the parts arrive, which is typically a day or two after we order them. Cabinet installation and countertop installation run longer and depend on the scope. You’ll get a written timeline with the quote. Call (833) 842-1866 for a specific estimate on your project.
We cover CGI Euro-style frameless cabinets, Shaker-style cabinets, quartz countertops, and vanity tops. If you can tell us the model or series, we can confirm the hardware and parts before we arrive. If you’re not sure, send a photo of the cabinet interior or the countertop edge and we’ll identify it.
Not when the service is done correctly. We avoid modifications that would give CGI grounds to deny a claim, and we note any warranty-relevant detail in the written scope. If a failure looks like a manufacturing defect rather than wear or installation error, we’ll say so and point you toward the right claim path.
Here are the ranges our Santa Rosa clients see most often for CGI product work:
| Service | Price Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
A full kitchen remodel in Santa Rosa typically runs $14,000 – $45,000, and a bathroom remodel $9,000 – $28,000, depending on how much of the CGI product stays and how much is replaced. Call (833) 842-1866 for an exact quote on your project. Estimates are free, and we’ll review a competitor’s written estimate line by line at no charge.
Often yes. If the particleboard core is sound, replacing fatigued hinges and slides with OEM or equal hardware and touching up the finish will get the doors closing flush again. Repair stops making sense when the core has swollen through the box or the finish failure is widespread.
Insufficient support. A sink cutout removes material at the point of highest stress, and an overhang without corbels or a steel support lets the slab flex under load. Cracks start at the cutout corner. The repair has to correct the support, not just fill the crack.
If the top separated because the adhesive bead was thin and the cabinet rail is dry and solid, it can be reset. If water has swelled the rail or the top is cracked, replacement is the honest answer. We check both before quoting.
They hold up well when the humidity swing is managed. Santa Rosa’s wet winters and bone-dry summers work painted and wrapped joints, so the practical rule is to keep the kitchen ventilated, wipe spills promptly, and skip harsh cleaners on the fronts. Finish blistering near the dishwasher is a moisture signal, not a product failure.
Cabinet installation runs $4,000 – $13,000 in Santa Rosa, depending on the linear footage, whether the layout is changing, and whether the walls need correction. A full kitchen remodel with new CGI cabinets lands between $14,000 and $45,000. Call (833) 842-1866 for a written flat price before any work starts.
Book Your CGI Service in Santa Rosa, CA
If your CGI cabinets, quartz, or vanity tops need attention, call Rowan Construction Group Santa Rosa at (833) 842-1866. You’ll get a flat written price before any work starts, a photo record when the crew leaves, and the 365-Day Done Right Promise behind the job. Free estimates, and a free second opinion on any written estimate you bring us.
Written by the team at Rowan Construction Group.












