A Rowan company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
CGI · Santa Rosa

CGI Windows & Doors in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
A new clay tile roof
A new front yard fence with a matching gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Windows & Doors: The Santa Rosa Owner’s Guide

We install and service CGI windows and doors across Santa Rosa, and the most common jobs run $4,500 – $15,000 for a standard window replacement package and $8,000 – $25,000 for impact-rated windows, depending on how many openings you’re replacing and the glass package you choose. Most Santa Rosa owners discover a failing window or door unit the same way: a fogged pane that won’t clear, a draft near the frame on a cool Petaluma Avenue evening, or a slider that drags and won’t seal tight against the jamb. CGI is a Florida-rooted manufacturer, so the product is built for heat, humidity, and hurricane codes, which makes it a solid fit for Santa Rosa’s mixed coastal-inland weather once it’s spec’d and installed correctly.

Call (833) 842-1866

Rowan Construction Group Santa Rosa is an independent service provider. We’re not affiliated with CGI, but we know the product line and we know what fails on it in Sonoma County.

Key Takeaways

  • Window replacement in Santa Rosa typically runs $4,500 – $15,000; impact-rated units run $8,000 – $25,000.
  • Fogged glass, failed seals, and dragging sliders are the three most common CGI failures we see.
  • CGI is Florida-tested, not California-tested – glass specs and installation details need judgment.
  • You get a written flat price before work starts and a documented photo record on every visit.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI makes several window and door families – vinyl single-hung and double-hung, horizontal sliders, casement and awning windows, and impact-rated lines (often sold under the CGI Sentinel name). Each family has its own sash dimensions, balance hardware, and glass spec, so the part that fits one model won’t fit another. Before we source anything, we confirm the model on the manufacturer label, usually affixed to the head jamb or the side of the sash. If the label is gone, we measure the rough opening and the visible glass in the field.

This is where CGI gets interesting. The company was built on Florida Building Code testing, so the components are overbuilt for wind and water by California standards. That’s usually good news – the frame and sash hardware are durable. But it also means replacement parts need to match the original Florida spec, and a generic vinyl sash balance from a big-box store won’t seat properly.

The OEM-versus-aftermarket decision comes down to three things: how long you plan to stay, whether the unit is in a wind-load zone, and what the part actually is. For glass, we usually recommend CGI-spec or equivalent-rated impact glass – aftermarket glass from an unnamed source can void the manufacturer’s warranty and won’t meet the same impact test. For hardware like balances, locks, and weatherstrip, quality aftermarket equivalents are fine and often cheaper.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Windows & Doors Is Failing

In Santa Rosa, the failures usually start quietly and get worse with each season of coastal fog pulling into the morning before the afternoon heat arrives. Here’s what we find most often:

  • Fogged or streaked glass you can’t wipe clean. The insulated glass unit (IGU) has lost its seal and moisture has entered the space between the panes. It won’t clear because the fog is inside the glass, not on it.
  • A draft near the frame on cool mornings. The weatherstrip or the sash seal has compressed or torn, letting outside air past the closure point. In Santa Rosa, that shows up first as a chill near the window on a foggy morning rather than a full-blown leak.
  • The slider or hinged door drags and won’t seal. The rollers, tracks, or hinges have worn, or the frame has shifted slightly. Sliders are especially prone to this – they collect grit in the bottom track and lose their seal long before the glass fails.
  • Condensation on the inside pane that won’t dry. Often a sign the seal has gone and the unit’s thermal performance has dropped. It can also mean an indoor humidity issue, so we check both before quoting a replacement.
  • Visible water intrusion at the sill or jamb after rain. Usually the flashing, sealant, or weep system has failed – not the window itself – and water is finding its way behind the frame. Left alone in Sonoma County’s wet winters, that rots the framing.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Here’s what window and door work actually costs in Santa Rosa, and what’s inside those numbers:

Work Installed Range
Window replacement (package) $4,500 – $15,000
Impact-rated window installation $8,000 – $25,000
Fogged IGU replacement (per unit) $180 – $420

What drives the range: the number of openings, the glass package (standard insulated versus impact-rated), the frame material, and whether the surrounding trim or framing needs repair. The glass unit itself is usually $180 – $420 per opening when only the IGU is being swapped; the labor and the framing work are what move the total.

Every quote from us is a written flat price with a written scope and a written workmanship warranty. No change order gets signed until you’ve seen the new number. The 365-Day Done Right Promise applies to every installation – if it’s not done right, we make it right. We source across our vetted brands, including KraftMaid, Cambria, and Silestone where the job includes cabinetry or surface work alongside the windows.

What’s Included

  • On-site inspection and model identification
  • Written flat price with line-item scope
  • Removal and disposal of failed units
  • Installation to manufacturer spec with flashing and sealant
  • Documented photo record of the visit, included as standard
  • Workmanship warranty and the 365-Day Done Right Promise

DIY or Call Us?

What you can safely check yourself: whether the fog is inside the glass or on it (wipe it – if it’s between the panes, it’s a failed IGU), whether the draft is at the weatherstrip or the jamb, whether the slider track has debris blocking it, and whether you have a manufacturer label on the unit. Photograph all of it. That’s the same information we check first on a visit.

Where DIY goes wrong: replacing an insulated glass unit. The IGU is heavy, it’s fragile, and every glass company will tell you the same thing – a dropped pane is a $400 mistake on a Saturday afternoon. Same with impact-rated windows, which have specific installation requirements for the frame anchorage and the glass-to-frame seal. Getting that wrong can void the manufacturer’s warranty and leave you with a window that fails in the first wind event. And don’t ignore a slider that suddenly won’t close all the way – warm weather makes the whole thing worse.

We’re background-checked, uniformed, and a live person answers the phone 24/7. Call (833) 842-1866 to schedule a free estimate.

FAQs

A new wood side gate with black hardware

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA remodeled hall bathroom with subway tile and a floating vanity

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch