A Rowan company - serving Santa Rosa, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
CGI · Santa Rosa

CGI Kitchen Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Kitchen Remodeling: The Santa Rosa Owner’s Guide

This page matches parts to a CGI kitchen. To be clear about what CGI sells and what we do: CGI makes cabinets, and we install CGI cabinets and the parts that support them – hinges, drawer slides, and door fronts.

Call (833) 842-1866

An installed CGI kitchen remodel in Santa Rosa runs $14,000 – $45,000. A cabinet-only refresh with new fronts and hardware is the bottom of that range, while a full gut with new boxes, counters, and backsplash sits at the top. A single replacement hinge or slide is a small job inside those numbers, and we quote it flat and written before any work starts.

Most Santa Rosa owners find out something failed before they shop for a replacement. A cabinet door starts dropping at one corner around Gladstone or Bennett Valley. A drawer sticks halfway out and never seats flush again. The soft-close hinge goes suddenly stiff, or the door swings past where it should stop. You notice it in passing for a week, then figure out it isn’t going to fix itself.

Which CGI Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

CGI is a Canadian cabinet maker, and its North American lines run across framed, full-overlay, and frameless builds. The three things that determine which part you need are the box construction (framed with a face frame, or frameless with finished sides), the overlay type on the door (standard or full), and the cabinet depth and height.

Don’t guess. Open the cabinet door and look at the inside of the door itself, or the underside of the top rail, for a manufacturer label. That label carries the model code and sometimes the hardware spec. If there’s no label, measure the face of the cabinet and the corner where the door mounts. A 3/8-inch reveal isn’t the same part as a full overlay.

The OEM-versus-aftermarket decision for CGI is usually clear. A hinge or slide with the CGI spec is a straight swap and matches the hole pattern. A quality aftermarket equivalent from Blum or Hettich fits the same opening, costs less, and often carries a stronger spring. What matters more than brand is the measurement: hinge cup diameter, cup depth, overlay, and slide length in inches. Get those four numbers right and the part fits.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Kitchen Remodeling Is Failing

Each of these has a specific cause you can verify once the part is off.

  • Cabinet door sags at the hinge. The screws have pulled out of the wood at the cup, or the hinge arm has bent. On older CGI boxes the screw holes widen over time, and the fix is either a repair insert or a new hinge in a fresh hole.
  • Soft-close stops working. The hydraulic damper inside the hinge has dried out. It’s a hard failure, not a slow one, and it doesn’t come back once it’s gone.
  • Drawer sticks or won’t close flush. A drawer slide that’s lost its ball bearings or bent a rail. Pull the drawer straight out and look at the rail; if the race is deformed, the slide is done.
  • Door won’t stay closed or opens itself. The hinge spring has weakened, or the door is out of alignment against the adjacent cabinet. In a full-overlay CGI build, one misaligned door can push the next.
  • Wood or finish crumbling around the hinge cup. Moisture intrusion, common in Santa Rosa kitchens with west-facing windows where morning condensation collects on the frames. A new hinge won’t hold in soft wood; the hole needs a proper repair first.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

We name the price in dollars before we lift a tool, and this page lists the ranges we work from in Santa Rosa. A single hinge or slide replacement is small. A batch of doors, hardware, and new slides sits inside the cabinet installation range. A full kitchen with new CGI boxes, counters, and backsplash runs the full lead range.

Work Installed range in Santa Rosa What’s included
Hinge and slide replacement, per cabinet Quoted per job New hardware matched to CGI spec, install, alignment check
Cabinet installation (CGI boxes and fronts) $4,000 – $13,000 Boxes, doors, hardware, install, level and shim
Countertop installation $2,000 – $6,500 Template, install, seam set, backed by our 365-Day Done Right Promise
Backsplash installation $800 – $2,500 Layout, set, grout
Kitchen island installation $3,000 – $10,000 Island build, toe kick, install
Full kitchen remodel $14,000 – $45,000 Scope written line by line, no change order without your signature

What drives the range: the number of cabinets affected, whether the boxes are still sound, and whether the counters need removal to reach the hinges on upper cabinets. Every line is broken out, parts and labor separately, so you can see what the hardware costs and what the install costs. No work starts under Clause 1 of the Haven Standard until you have the written price in hand, and if a change is needed mid-job, nothing proceeds until you sign the change order.

DIY or Call Us?

A homeowner can safely tighten a loose hinge screw with a screwdriver, confirm the label inside the door, and pull a drawer out to inspect the slide. Those three checks cost nothing and often tell you exactly what needs replacing.

What goes wrong is the swap itself. The cabinet door is heavy, the hinge cup hole is specific, and a new hinge seated in a soft or damaged hole will pull out again in a month. Getting the overlay wrong means the door sits proud or binds against the next one. Repairing the cabinet side for a stripped screw hole needs an insert set and a clamp, and if the boxes are damaged by moisture, a new hinge won’t hold at all. If your cabinet door has dropped and the box feels soft, call us first. We’ll tell you if a repair will hold or if the box needs more. You can also bring a competitor’s quote and we’ll review it line by line, no charge.

For the part or the full kitchen, call (833) 842-1866 for a free estimate. We’re an independent service provider in Santa Rosa, not affiliated with CGI, and we install CGI cabinets along with KraftMaid, Cambria, and Silestone as part of a full kitchen scope.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch