A Rowan company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
CGI · Santa Rosa

CGI Home Additions & ADU in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
New double-hung windows in a dining room
A new front entry door with glass sidelights
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
A stone counter, tile backsplash and open shelf after a kitchen remodel
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Home Additions & ADU: The Santa Rosa Owner’s Guide

If you own a CGI home additions & ADU product and a part has failed, we install CGI-compatible additions and ADU components across Santa Rosa, with typical installed projects running $45,000 – $130,000 depending on scope. Same-day availability is not something we promise on planned construction work, but our written price arrives before any tool is picked up, and we schedule within a timeline you can plan around. Owners usually discover the failure the same way: a hairline crack that keeps growing along a foundation seam, an exterior wall that stays damp long after rain stops, or an electrical panel in the addition that trips under a normal load. One honest note before anything else: the components behind these additions are not DIY territory. Structural, electrical, and waterproofing work done wrong can fail in ways that cost five figures to correct.

Call (833) 842-1866

Which CGI Models This Applies To

A new multi-panel patio door opening a kitchen to the patio

CGI home additions and ADUs come in a range of structural and utility configurations, and the part you need is defined by the geometry of your addition, not the marketing name on the contract. Before we quote anything, we measure the actual opening, wall assembly, and electrical feed, because a part that fits a 12-foot span will not seat correctly on a 14-foot one. Series and model family matter here more than most homeowners expect. A later-generation CGI component often uses a slightly different fastener pattern and membrane spec than the prior line, and those differences are invisible until the part is in hand.

To identify the right part, look for the label plate or data tag installed during the build, usually inside a mechanical closet, on the inside face of a rim board, or in the documentation binder. Photograph it. Measure the opening at three points: top, middle, and bottom. Write the discrepancy down. That measurement is what tells us whether the OEM route or a verified equivalent works.

On the OEM-vs-aftermarket decision for CGI specifically: genuine CGI parts cost more and ship slower, but the fit and warranty are guaranteed. A quality aftermarket equivalent can close the gap when the original spec is a standard size and the load path is documented. We evaluate this per part, not as a blanket policy, and we tell you which path we recommend and why. We are an independent service provider and are not affiliated with CGI.

If your build includes cabinetry or stone, the same sourcing discipline applies to KraftMaid, Cambria, and Silestone selections.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Home Additions & ADU Is Failing

Five real symptoms and what they actually mean:

  • Hairline cracks along the addition-to-original seam, widening over months. This points to differential settlement: the addition footing is moving at a different rate than the original structure. A crack under 1/8 inch is often cosmetic; anything wider, or actively growing, needs a look at the footing and load transfer.
  • Persistent damp or mold on the interior of an exterior addition wall. Usually a failed or flashed-wrong moisture barrier at a penetration or roof junction, not a code issue with the whole structure. Left alone through a Santa Rosa rainy season, it compounds.
  • Circuits in the addition tripping under normal load. Common cause is an undersized feed or a junction that loosened during settling. Electrical is not a self-repair part.
  • Squeaks or a soft spot in the addition floor near a doorway. Points to subfloor moisture or a fastener that has backed out. Sounds minor; signals water under the surface.
  • ADU door or window that no longer closes flush. Frame movement, not hardware failure. The fix is in the wall, not the hinge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

For Santa Rosa, here are installed ranges for the work this page covers, with a $45,000 – $130,000 lead range for full home addition projects and $90,000 – $220,000 for ADU construction. Garage conversions run $30,000 – $80,000. Every number is written before any work starts, with a scope and a workmanship warranty attached, and no change proceeds without a signed change order.

Project Installed Range
Home Addition $45,000 – $130,000
ADU Construction $90,000 – $220,000
Garage Conversion $30,000 – $80,000

What drives the range: foundation engineering for Santa Rosa’s expansive clay soils, permit and inspection costs, span, and whether utility feeds need upgrade. Some additions stay near the low end on straightforward slab-on-grade work with standard plumbing and electrical. Complex loads, hillside grading, or full ADU stand-up push toward the upper figure. Our technicians have up to 19 years of experience, and every visit includes a documented photo record as standard.

DIY or Call Us?

What you can safely check on your own: photograph the data label, measure the opening at three points, note where a crack starts and how wide it is, and check the addition’s breaker panel for tripped circuits. Take photos. Note dates. That record is what makes a second opinion fast.

Where DIY goes wrong: foundational, framing, electrical, and waterproofing work on a CGI addition all carry real failure modes. A footing repair attempted without load analysis makes settlement worse. A moisture barrier patched without flashing the actual penetration traps water and accelerates rot. Electrical work in an addition is not a homeowner repair. We are not going to describe a process that could make the problem permanent.

If you have a written estimate from another contractor, we will review it line by line at no charge. Call (833) 842-1866 to schedule that review or a free estimate.

FAQs

A single-story rear room addition with tall windows and a new patio

How long should a CGI addition component last in Santa Rosa?
Most structural components like footings and framing last the life of the addition when installed correctly, while moisture barriers and sealants typically need inspection or replacement every 10 to 15 years in our wet-winter climate. Santa Rosa’s clay soils and seasonal rain load are the primary factors that shorten service life on any addition, CGI or otherwise. Call (833) 842-1866 for a specific assessment.

Can the failed part be repaired instead of replaced?
Often yes, if the failure is in a barrier, sealant, or fastener rather than the structural member itself. A cracked foundation seam or a small localized leak frequently resolves with a targeted repair and a proper flashing detail. A footing that has moved, or an electrical feed that is undersized, usually requires replacement. We diagnose before we quote.

How long does the repair or replacement take?
A targeted repair on a barrier or fastener runs one to three days, while a footing correction or section replacement runs one to two weeks. Full addition or ADU projects run months and are scheduled around your family’s timeline. The scope drives the number, and we write it out before anything starts.

How do you source the CGI part?
We measure the actual geometry, check the data label, and confirm the CGI series before ordering, then compare the OEM spec against verified equivalent options. We do not stock parts or carry them on a truck, so your lead time is real and we tell you what it is. The written quote reflects the sourced cost, not an inflated one.

Ready to move? Call (833) 842-1866 for your free estimate on CGI home additions and ADU work in Santa Rosa. Our teams are background-checked and uniformed, calls are answered by a live person 24/7, and every project is backed by our 365-Day Done Right Promise under The Haven Standard. If a second opinion would help, bring any written estimate from another contractor and we will review it line by line at no charge, then hand you a written price before any work begins.

Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new stained cedar privacy fenceA new paver patio with a seat wall and fire pit

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch