







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Fence Installation: The Santa Rosa Owner’s Guide
Fence installation from a CGI product starts with a question we can answer in one line: what is the actual condition of what’s standing now, and what does a like-for-like replacement cost? For Santa Rosa homeowners we quote $3500 – $9000 for fence installation, flat and in writing before anyone picks up a tool. That number moves up or down on run length, panel style, gate count and how much demolition the old fence needs. We are not affiliated with CGI; we’re an independent contractor that works with CGI materials and the CGI-series specs behind them.
Owners usually arrive at this page the same way. A winter storm knocked three panels loose, a post started leaning toward the neighbor’s side, or a gate that used to swing freely now drags on the concrete. Sometimes it’s quieter: the boards look fine but the bottom rail is soft when you press it, or the whole run hums in a gust. All of those are signs the fence has reached the end of what patching can hold.
Key takeaways
- CGI fence installation in Santa Rosa typically runs $3500 – $9000 installed, quoted flat before work begins.
- Post footing condition decides the price more than the panel style does.
- We measure the existing run and photograph the footings before we quote, so the number holds.
- Under Clause 1 of the Haven Standard, no work starts without a written price and a written scope.
Which CGI Models This Applies To

CGI fence systems are specified by run length, panel height and post spacing, and the model line on your original paperwork tells us which combination you have. The spec that matters most is post spacing and embedment depth, because that’s what governs whether an existing run can take a new panel or has to be rebuilt post by post. If you don’t have the paperwork, look for the manufacturer label stapled to the back rail or printed on the post cap, and measure the on-center distance between posts. Standard residential runs sit in a narrow band, but the variance between a 6-foot privacy panel and a shorter picket run changes the labor more than it changes the material cost.
The OEM-versus-aftermarket question for CGI is straightforward. Official CGI components match the original fasteners and rail profiles exactly, which keeps the warranty intact and makes the fit predictable. Quality aftermarket equivalents cost less and often perform the same, but the rail gauge and the screw patterns have to be checked against your existing posts or you’ll be re-drilling a hole that should have lined up. We document which route we’re recommending and why, in writing, before you decide. We also work with KraftMaid, Cambria and Silestone on interior finishes, so this same written-spec discipline shows up on every trade.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Fence Installation Is Failing
Here’s what we find when we walk a failing run in Santa Rosa, and what each symptom actually means underneath.
- Leaning posts. The concrete footing has cracked or the soil has shifted around it. A leaning post is a footing problem, not a board problem, and patching the panel won’t stop the lean.
- Soft or spongy bottom rails. Water has been sitting at the base of the panel and the rail has started to rot or delaminate. Press the rail with your thumb near the ground; if it gives, the moisture has been there a while.
- Loose fasteners and rattling panels. Screws have backed out of the rail, or the holes were drilled oversize and have wallowed out. In a wind gust the whole run will hum or clatter.
- Gates that drag or won’t latch. The gate post has moved out of plumb. A dragging gate is usually the first visible sign that a post footing has shifted.
- Visible sag between posts. The top rail is undersized for the span or a support has failed. You’ll see the dip in the daylight line above the panels.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Fence installation in Santa Rosa runs $3500 – $9000 for a typical residential project. The range is driven by run length, panel style and height, gate count, and, most of all, how much of the old fence has to come out. A run where the footings can be reused costs materially less than a full rebuild, and we tell you which one you’re getting before you commit.
| Line item | What drives it |
|---|---|
| Demolition and haul-off | Run length, how much concrete has to break out |
| Panel material | Style, height, whether OEM or quality aftermarket |
| Post setting | Count, footing depth, soil condition |
| Labor | Access, terrain, gate count |
| Gate hardware | Number of gates, hinge and latch spec |
Every quote is a flat written price with a written scope and a written warranty, and there are no change orders without your signature. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right.
DIY or Call Us?
There’s a reasonable line between what you can check yourself and what you shouldn’t take on. You can walk the run, test the rails with your thumb, check post plumb with a level, inspect the fasteners, and photograph everything. That’s a useful survey, and it’s what we do first.
What you shouldn’t do is pull and reset a footing, rebuild a post in load-bearing soil, or run heavy panel and gate hardware overhead, especially on a slope. Fence posts are heavy, the footings are set in concrete, and a panel that comes down wrong can land on a person or a neighbor’s property. Digging out a footing near a property line also touches California setback rules, and the wrong placement becomes a neighbor dispute. We handle the plan, the placement, and the heavy lifting. Call (833) 842-1866 and we’ll schedule the site check and get a written price to you.
FAQs

A properly set CGI fence in Santa Rosa can hold up for a long time, but the honest answer depends on the footing and the material. Rot-resistant panels last far longer than the posts that hold them, and the post is almost always the first thing to go. If the footings are sound and the panels are quality, a decade-plus of service is realistic. Call (833) 842-1866 for a condition check and an honest read on what’s left.
Sometimes, yes. If a single panel or a gate is failing but the posts are plumb and the footings are solid, a targeted repair can do the job for far less than a full run. The moment two or more posts are leaning, patching is throwing money at a problem that will come back. We’ll tell you which one you have in writing before you spend anything.
A straightforward residential run is usually a few working days, and a larger run with gates and demolition takes longer. We give you a written schedule with the quote so you can plan around it. Call (833) 842-1866 to get the schedule and the price together.
We match the CGI component to your existing model line, fasteners and rail profiles, then recommend either the OEM part or a quality aftermarket equivalent with the trade-offs written down. You see the spec before you approve it. That same discipline applies across every trade we run, from kitchen cabinets to a new fence line in Santa Rosa.
Call (833) 842-1866 for a free estimate on your CGI fence installation in Santa Rosa. A live person answers, every crew member is background-checked and uniformed before they arrive, and every visit includes a documented photo record as standard. If you already have a written estimate from someone else, bring it to us for a free second opinion, reviewed line by line at no charge.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












