







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambria Home Additions & ADU: The Santa Rosa Owner’s Guide
We build and install Cambria-surfaced home additions and ADUs for Santa Rosa homeowners, with projects typically running $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU. Planning is not same-day work, and we won’t pretend it is – a proper scope, permit set, and written flat price come first, usually within two to three weeks of the initial walkthrough. Rowan Construction Group Santa Rosa is an independent contractor and is not affiliated with Cambria.
Owners usually call us after a different kind of failure. The addition or ADU was framed and finished, but the Cambria surface on the island, the vanity, or the kitchenette counter has chipped at an edge, shown a hairline crack near a seam, or darkened around the sink cutout. That’s when the search begins – not for a manufacturer, but for someone who can source the right slab and reinstall it without opening a second round of change orders.
Which Cambria Models This Applies To

Cambria is a quartz surface, not a cabinet or a window line, so the model that matters here is the slab series and the fabrication spec behind it. The homeowner-facing names you’ll see on a sample card – the solid whites, the marble-look veining, the warmer naturals – each carry a fabrication and seam standard, and Cambria’s own care documentation is the reference point for what a fabricator can and cannot do with a given series. Where the slab belongs in an addition versus an ADU changes the spec, too: a wet-bar counter in a detached ADU sees different use than an island in a main-house kitchen, and seam placement and overhang support should be planned around that.
Identify what you actually have by checking the fabrication invoice or the original install paperwork, then confirm the series against a current sample. Cambria’s material is homogeneous engineered stone, so there are no model-specific “OEM replacement parts” the way there would be for a window sash or a garage spring – what you’re matching is the slab, the edge profile, and the seam layout. That’s a different sourcing decision than a true aftermarket equivalent, and it’s why the written quote should name the series and the edge profile before anyone cuts. We also work with KraftMaid, Silestone, and Kohler when the addition calls for coordinated cabinetry and fixtures.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Cambria Home Additions & ADU Is Failing
- Chipping along an exposed edge or corner. Engineered quartz is hard and dense, but a sharp overhang or an unsupported edge takes impact badly. A chip usually points to an edge profile that was finished too thin for how the surface is being used.
- A hairline crack radiating from a seam or cutout. Quartz seams are adhesive joints, and if the substrate under the slab wasn’t flat and fully supported, the joint flexes under load and opens. That’s a fabrication and install issue, not a material defect.
- Darkening or a ring around the sink or cooktop cutout. Water sitting at an unsealed cutout edge wicks into the substrate below. Left long enough, the support layer swells and the surface starts to rock.
- A dull, cloudy patch that won’t buff out. Quartz is non-porous, so a haze that survives normal cleaning usually means an abrasive cleaner or a scouring pad has scratched the finish. That’s a resurfacing decision, not a cleaning one.
- Visible movement or a hollow sound when you press. A counter that flexes or sounds hollow has lost its substrate contact, typically from settling or moisture. This one gets worse and should be looked at before anything heavy is set on it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A Cambria surface replacement inside a Santa Rosa addition or ADU lands in a wide band because the price depends on square footage, edge profile, number of cutouts, and whether the substrate needs rebuild. The broader addition project it sits inside typically runs $45,000 – $130,000; a standalone counter replacement is a smaller line item within that. For context on adjacent trades in the same project, a kitchen remodel in Santa Rosa runs $14,000 – $45,000 and a bathroom remodel $9,000 – $28,000, with Cambria surfacing often a line item within either.
What drives the range: slab selection and series, edge profile complexity, sink and cooktop cutouts, seam count, and whether the existing substrate can be reused or has to be rebuilt. Our quote is a flat written price with a named series, an edge profile, and a written scope before any cutting starts – no “call for a quote,” no change order signed after the fact. Under Clause 1 of The Haven Standard, the price is written before anyone picks up a tool.
| Item | Santa Rosa Range |
|---|---|
| Home Addition (full project) | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
| Countertop Installation (Cambria) | $2,000 – $6,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
DIY or Call Us?
What you can safely check yourself: whether the surface rocks when you press a corner, whether a seam has opened, and whether water is pooling at a cutout. Take a photo with a straightedge across the seam. Compare a sample chip to your original series if you have the paperwork. Those checks cost you nothing and tell you whether this is a cleaning problem or a fabrication problem.
Where DIY goes wrong: engineered quartz is heavy, sharp at a fresh edge, and unforgiving of a substrate that isn’t dead flat. Cutting or resetting a slab without proper support and dust control is a fast way to a second failure, and it’s not a homeowner task. The substrate correction and moisture control underneath are the parts that decide whether the new surface lasts, and those are trade work. Call (833) 842-1866 for a free estimate – we’ll bring a written price and a photo record of what we found.
FAQs

A properly installed Cambria surface will hold up for decades in a Santa Rosa addition or ADU, and the material itself rarely fails – the seam, edge, and substrate do. Santa Rosa’s summer heat and winter rain swings stress the substrate more than the slab, so moisture control at cutouts is the real lifespan factor. Call (833) 842-1866 for an exact quote – estimates are free.
Sometimes yes – a small chip can be filled and color-matched by a fabricator, and an opened seam can be re-bonded if the substrate is sound. A crack that runs through the slab or a surface that’s rocking usually means replacement, because the support underneath has failed. We’ll tell you which one you’re looking at in writing. Call (833) 842-1866 to schedule a free estimate.
Template, fabrication, and install usually run one to three weeks from approval for a standard counter, longer if the substrate has to be rebuilt or the addition is still under construction. Cambria is fabricated to template, not pulled off a shelf, so there’s a lead time between measure and set. Call (833) 842-1866 for a flat written price and a schedule.
We match your original series from the fabrication paperwork or a physical sample, confirm it against a current slab, and name the series and edge profile in the written quote before anything is cut. Because Cambria is engineered stone with no model-specific replacement parts, the match is a slab-and-spec decision, not a part number lookup. Call (833) 842-1866 for a free estimate and a review of any existing quote.
Whether you’re finishing a detached ADU in Rincon Valley or rebuilding a kitchen counter that failed at the seam, the next step is the same: a written price before anyone starts, a documented photo record on every visit, and the 365-Day Done Right Promise standing behind the work. Call (833) 842-1866 to schedule your free estimate with Rowan Construction Group Santa Rosa.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












