







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Santa Rosa Owner’s Guide
We install and repair Boral-compatible clay and concrete roof tile across Santa Rosa, and the installed price for a full roof replacement typically lands between $8,000 and $20,000, with individual tile and flashing repairs running $400 to $1,800. Tile roofing is not same-day work – the honest timeframe for a full replacement is measured in days, not hours, because the underlayment and batten system underneath has to be done right or the new tile fails early. In Santa Rosa’s 2020 and 2021 fire seasons, many owners first discovered failing Boral roofing not from a leak but from a post-fire inspection report or an insurance adjuster flagging cracked, slipped, or delaminated tiles on the windward slope.
Rowan Construction Group Santa Rosa is an independent service provider. We are not affiliated with Boral, but we install and repair Boral-compatible tile systems daily and can match the profile to your existing roof before recommending anything.
Key Takeaways
- Full Boral-compatible roof replacement in Santa Rosa: $8,000 to $20,000 installed.
- Individual tile or flashing repairs: $400 to $1,800, depending on access and tile count.
- Boral ESP and Saxony profiles require specific matching of headlap and side-lap dims – mismatched tile fails within a season.
- Every visit includes a documented photo record of what we found on the substrate and the tile layer.
- Written flat price before any work starts, backed by the 365-Day Done Right Promise.
Which Boral Models This Applies To

Boral’s residential tile lines that show up on Santa Rosa roofs most often are the ESP (flat concrete), Saxony 900 and Saxony 700 (shingle-style concrete), and the Barcelona line for clay. Each has its own headlap spec and thickness, and that is where compatibility gets sticky: Boral ESP tiles run roughly 17 inches long with a specific side-lap channel, while Saxony profiles are shaped to interlock differently. If you’re matching a repair, the identifying marks are on the back of the tile or under the eave – look for the Boral stamp and the profile name molded into the underside.
The OEM-versus-aftermarket call for Boral tile is different from what it is for, say, a Kohler fixture. A generic concrete tile that looks close in profile will not match the headlap, so the repair leaks at the joint in the first heavy rain. For small repairs we source genuine Boral-matched profile tile or a carefully vetted equivalent with the same dims; for full replacements we’ll quote both the Boral-compatible route and a quality equivalent and let the written number make the case. Sourcing depth across fifty-plus vetted brands is what lets the quote stay honest rather than padded.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Cracked tiles after a freeze-thaw cycle. Santa Rosa’s occasional hard frosts can hairline-crack concrete tile that absorbed moisture the week before. One crack is cosmetic; a cluster on the same slope means the tile batch or the underlayment is the issue.
- Slipped or misaligned tiles at the ridge or eave. Usually a broken fastener or deteriorated batten, not the tile itself. This shows up as visible gaps or a tile sitting proud of its neighbor.
- Granule loss and surface pitting on concrete tile. Boral concrete tile carries a surface coating that pits after decades of UV exposure. Pitting alone is slow; pitting plus water staining means the underlayment has likely reached end of life.
- Ceiling stains or attic moisture after rain. Almost always underlayment failure, not tile failure – tile sheds most water, but the membrane beneath is what actually seals the deck. Brown rings on the ceiling are the membrane talking.
- Lifted or curled flashing at valleys and penetrations. Flashing is the shortest-lived component on any tile roof. Lifted step flashing at a chimney or skylight lets water behind the tile and into the deck within one wet season.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Full roof replacement in Santa Rosa runs $8,000 to $20,000 installed, and the range is driven by three things: roof pitch and access, the square footage, and whether the existing underlayment and battens can be reused or need full replacement. Tile repairs run $400 to $1,800, and tile roof repairs specifically land at $600 to $2,500 when valleys or penetrations are involved. Metal roof installation, if the tile is beyond saving and you want a different system, runs $15,000 to $40,000.
Every quote is a flat written price with the scope of work spelled out line by line: tile count, underlayment spec, flashing replacement, and disposal. The warranty on the work is written into the quote, and under Clause 1 of the Haven Standard no work starts until the price is signed. A documented photo record of the substrate and tile comes with every visit. Bring a competitor’s written estimate and we’ll review it line by line at no charge as a free second opinion.
DIY or Call Us?
Tile roofing is a height-and-fall hazard first and a tile-matching problem second. You can safely check from the ground with binoculars for slipped tiles, cracked tiles, and lifted flashing, and you can check the attic for staining or daylight through the deck. What you should not do is walk a tile roof to reposition a tile – the tile is brittle underfoot, the fall risk is real, and a broken tile during a DIY repair often means a new leak in a spot that was fine before you started. Tile repair and full replacement are work for a trained professional with the right fall protection and the right matching tile on the order form.
Call (833) 842-1866 for a free estimate. We’ll walk the roof, photograph what we find, and put a written price in front of you – no pressure, no same-day sales pitch.
FAQs

Boral concrete and clay tile commonly lasts 40 to 50-plus years on the tile itself, but the underlayment beneath it typically fails at 20 to 25 years, which is why a roof that looks fine from the street can still leak. If your home was built or re-roofed in the 1990s or early 2000s, the membrane is likely the actual limit, not the tile.
Call (833) 842-1866 for an inspection and an exact quote – estimates are free.
Often yes. Individual cracked or slipped tiles, damaged flashing, and localized underlayment failures can be repaired in the $400 to $1,800 range without touching the rest of the roof. Full replacement only makes sense when the underlayment is failing across most of the roof or the tile loss is widespread – we’ll tell you which one you have in writing.
A single-tile or flashing repair is usually a half-day job; a full roof replacement on a typical Santa Rosa home runs several days, weather permitting, because the underlayment and batten layers must be installed and inspected before the tile goes back down. We don’t promise same-day completion on planned roofing work – the schedule we give you is the one we keep.
We identify the profile from the back-stamp on an existing tile, measure the headlap and side-lap, then source a genuine Boral-matched tile or a vetted equivalent with the same dims. Where a profile has been discontinued, we’ll quote a compatible replacement and show you the spec comparison in the written scope. Sourcing runs across fifty-plus vetted brands including KraftMaid, Cambria, and Silestone on the interior side – the same discipline applies to the roof.
Call (833) 842-1866 to schedule your free estimate. Our technicians have up to 19 years of experience, every crew is background-checked and uniformed, and every visit leaves you with a documented photo record and a written price before any work begins.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












