A Rowan company - serving Santa Rosa, CA
A home with a brand-new roof and gutters at golden hour
Boral · Santa Rosa

Boral Home Additions & ADU in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A standing-seam metal roof over a covered porch
New architectural shingles with a clean valley
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Home Additions & ADU: The Santa Rosa Owner’s Guide

We build and finish home additions and ADUs in Santa Rosa using Boral exterior and structural components, and a full addition typically runs $45,000 – $130,000 depending on size, foundation work, and finish level. An attached addition is planned work, not emergency work, so we schedule a site visit and deliver a written price before anything starts. Owners usually land on this page the way they find most building problems: a hairline crack that keeps reopening in a Boral trim panel, a fiber-cement soffit board that reads soft near the roof edge, or a deck fascia that has swollen after two wet winters. The material isn’t failing because it’s cheap. It’s failing because something behind it – flashing, a weep path, or a fastener – wasn’t done right the first time.

Call (833) 842-1866

One note up front: Rowan Construction Group Santa Rosa is an independent construction contractor. We’re not affiliated with Boral, and we don’t sell Boral products. What we do is build with Boral materials to spec and replace failed components when the original installation goes wrong.

Key Takeaways

  • A Santa Rosa addition runs $45,000 – $130,000; a detached ADU runs $90,000 – $220,000.
  • Most Boral component failures here trace to water intrusion, not the material itself.
  • We deliver a flat written price and written scope before any work begins.
  • No change proceeds without a signed change order.
  • Every visit includes a documented photo record at no extra charge.

Which Boral Models This Applies To

A new roof with clean valleys and new flashing

Boral makes a wide range of building products, and the two that come up most in Santa Rosa addition work are fiber-cement siding and trim (sold under the Boral brand and its TrueExterior line) and Boral cultured stone veneer for exterior cladding. If you’re trying to identify what’s on your house, start with three places: the original build or remodel permit on file with Santa Rosa’s planning department, the back of a loose siding panel (Boral fiber-cement typically carries a stamp with the product name and profile), and a caliper measurement. Standard fiber-cement lap siding runs 5/16 inch to 7/16 inch thick with a 6- to 8-inch exposure; if your measurement falls outside that, you may be looking at a different manufacturer’s board that was installed alongside Boral trim.

Here’s the compatibility gotcha that trips people up: Boral fiber-cement profiles don’t always match the nominal dimensions of competing brands, so a like-for-like replacement isn’t always like-for-like. A 5/4-inch Boral trim board measures closer to 1 inch actual, and dropping a competitor’s true 1-1/4-inch board into that run leaves a proud edge that catches water. Match by actual measured thickness, not by nominal name.

On the OEM-versus-aftermarket question, we’re direct about it. Boral replacement components make sense when the surrounding field is intact and you’re patching a small run. A quality aftermarket fiber-cement board from a vetted supplier makes sense when the failure is broader and you’re re-cladding a wall section, because the cost difference is real and the performance gap is small once the flashing and drainage plane are corrected. We source across more than fifty vetted brands in the same way we handle KraftMaid, Cambria, and Silestone selections – the written quote reflects an honest number, not an inflated one.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Home Additions & ADU Is Failing

In Santa Rosa’s climate – wet winters, dry summers, and the Russian River fog that pushes moisture into north-facing walls – Boral components fail in predictable ways. Here’s what to look for and what’s actually causing each symptom.

  • Hairline cracks that keep reopening at panel joints. This is usually movement, not material failure: the framing behind the panel is shifting or the fastener schedule was too sparse. If you caulk it and it splits again within a season, the panel needs to come off and the substrate checked.
  • Soft or spongy spots near the roof edge and window corners. Water is getting behind the board and the fiber-cement is staying saturated. Nine times out of ten the culprit is missing or incorrectly lapped flashing, not the Boral board itself.
  • Swollen or delaminating fascia at the deck ledger. Deck-to-house connections are the single most common moisture entry point we find on Santa Rosa additions. The Boral fascia absorbs what the flashing lets through.
  • Chalky white residue that won’t wash off. Fiber-cement can effloresce when moisture moves through it. A little is normal; a persistent bloom across a whole wall means water is traveling through the assembly.
  • Paint peeling in sheets rather than flakes. Sheet peeling points to moisture behind the coating. The paint is the messenger; the wall assembly is the problem.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

Replacing failed Boral components on a Santa Rosa addition is quoted as a flat installed price, and the number depends on how much of the wall assembly has to come apart to correct what’s behind the board. Here’s the range picture for Santa Rosa:

Scope Installed Price Range
Home addition (full build, attached) $45,000 – $130,000
ADU construction (detached) $90,000 – $220,000
Garage conversion to living space $30,000 – $80,000

What drives the number: foundation and site work, the size of the addition, whether the existing wall has to be opened to correct flashing or the drainage plane, and the finish level you choose. What’s included in every quote: a written scope, a flat price, the labor, the materials, and a written workmanship warranty. What’s not included and never will be: surprise change orders. No change proceeds until you’ve signed the change order, which is the discipline that has kept projects within a few percent of the agreed price across 4,000-plus jobs.

If you have a written estimate from another contractor, bring it. We’ll review it line by line at no charge as a free second opinion.

DIY or Call Us?

Some things you can safely check yourself. Walk the exterior after a rain and look for water staining below window sills and at deck connections. Measure your board thickness with a caliper and compare it to the spec. Press a screwdriver handle – not the blade – into suspect boards to see if they give. What you shouldn’t do is open a wall assembly or remove flashing to investigate, because you can turn a localized water problem into a much wider one in a single afternoon of the wrong pry bar. And don’t re-clad a section without confirming the drainage plane behind it is intact – putting new Boral board over a failed weather barrier is a guaranteed repeat.

Under Clause 1 of The Haven Standard, the price is written before anyone starts, so you’ll know the number before you commit. Call (833) 842-1866 to schedule your free estimate.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA freestanding soaking tub in a remodeled primary bathroomA second-story addition that matches the existing rooflineA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch