A Rowan company - serving Santa Rosa, CA
A home with a brand-new roof and gutters at golden hour
Boral · Santa Rosa

Boral Fence Installation in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
New architectural shingles with a clean valley
A new roof with clean valleys and new flashing
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Boral Fence Installation: The Santa Rosa Owner’s Guide

Boral fence installation in Santa Rosa typically runs $3,500 to $9,000 installed, and most projects are completed over two to four scheduled days once materials are on hand. We work with independent local crews who install Boral-compatible systems and quote a written flat price before anything gets dug. Owners usually find out a fence is failing the same way: a post leans after a wet winter, a panel sags between rails, or a gate that closed cleanly last spring starts dragging on the concrete.

Call (833) 842-1866

Santa Rosa sits on clay-heavy soils in many of its older neighborhoods, and that matters for fencing. Clay swells when the rain comes and shrinks in the dry months, and a post set in a shallow concrete collar will work loose in a single season. If you’re staring at a wobbly fence and wondering whether it’s the post, the rail, or the whole run, this page walks through it in trade terms.

Key Takeaways

  • Installed Boral fence runs $3,500 – $9,000 in Santa Rosa, depending on linear footage and gate count.
  • Most failures trace to post footings and soil movement, not the fence boards themselves.
  • We’re an independent contractor, not affiliated with Boral; we source compatible materials for the system you have.
  • A written flat price and a documented photo record come standard on every job.

Which Boral Models This Applies To

A standing-seam metal roof over a covered porch

Boral doesn’t make one fence. It makes fencing systems and components across several lines, and the material you have determines which parts are compatible. The two you’ll see most on Santa Rosa properties are Boral’s composite and timber-look fence systems (marketed under names like Boral Fencing and its associated panel and post components) and Boral masonry and retaining-wall block where a fence ties into a garden wall. Before we quote, we identify the system by reading the manufacturer stamp on the post cap or rail end where it’s visible, measuring the post cross-section (most residential posts run 4×4 or 5×5 nominal, and the exact dimension tells us the series), and checking the panel spacing center to center.

That measurement step is the compatibility gotcha most homeowners miss. A Boral post cap sized for one series won’t seat on another, and rail brackets rated for a specific rail profile won’t hold a different one. When the original part is discontinued or you can’t confirm it, we evaluate a quality aftermarket equivalent against the same load and dimension spec rather than forcing a mismatched OEM piece. We’ll tell you plainly which option we recommend and why.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Boral Fence Installation Is Failing

Fence problems show up in a specific order. Here’s what to look for and what’s actually happening underneath.

  • Posts leaning or rocking. This is almost always a footing problem: the concrete collar is too shallow, the hole was dug narrow, or water is pooling at the base after our winter rains. The fence board isn’t the issue; the ground under it is.
  • Panels sagging between rails. Sag comes from a rail that’s lost its fastener grip or a post that’s shifted slightly, dropping the rail out of level. Left alone, the sag loads the next rail down the line.
  • Gates dragging or not latching. A gate is the highest-stress point on any fence because it moves. A hinge that’s loosened, or a post that’s settled a fraction of an inch, throws the whole swing off and puts strain on the latch hardware.
  • Loose or popped fasteners. Rusted or backed-out screws and brackets let panels rattle and separate. In Santa Rosa’s wet-cool-dry cycle, cheap fasteners corrode faster than the fence material around them.
  • Visible rot or soft spots at the base. Wood or timber-look components that stay damp at the ground line soften first. Probe the bottom six inches with a screwdriver; if it sinks easily, the material has given up.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Roofers installing a new roof with safety harnesses

For a typical residential run, installed Boral fence work in Santa Rosa lands between $3,500 and $9,000. What drives the number up or down is linear footage, the number of gates, whether posts need new footings poured, and how much of the existing fence can be salvaged versus replaced outright. A repair on a few panels sits at the low end; a full replacement with new posts and a gate sits at the top.

Scope Typical installed range (Santa Rosa)
Panel and rail repair (partial run) $3,500 – $5,000
Mid-size replacement with new posts $5,000 – $7,000
Full run replacement including gate $7,000 – $9,000

Our quote is a flat written price with a written scope and a written warranty, and the materials-plus-labor breakdown is on the page before you agree to anything. The work carries our 365-Day Done Right Promise. If it’s not right, we make it right.

DIY or Call Us?

You can safely check a few things yourself: confirm the post is the real problem by pushing it side to side, note whether the fasteners are corroded, and measure your post dimensions so you know which series you have. That’s information-gathering and it’s useful.

Where it goes wrong is the repair itself. Post footings are heavy, load-bearing, and need to be set to the right depth and diameter for the soil; a shallow re-set looks fine in July and fails by January. If your fence ties into a retaining wall or masonry block, moving a post can shift load onto structure that wasn’t designed for it. And replacing a run means getting panel alignment and fastener spec right the first time, or you’re back to a sagging fence within a season. We’d rather you call than hurt your back or your fence. Reach us at (833) 842-1866 for a written estimate.

FAQs

A new front entry door with glass sidelights

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA new bay window with a cushioned seatA new wood side gate with black hardware

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch