A Rowan company - serving Santa Rosa, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Atlas · Santa Rosa

Atlas Kitchen Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A remodeled kitchen with a waterfall island and wood cabinets
An open kitchen and dining area after a remodel
A galley kitchen opened up to the dining room with a new peninsula
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Atlas Kitchen Remodeling: The Santa Rosa Owner’s Guide

We install and remodel kitchens built around Atlas cabinetry and components in Santa Rosa, and a full kitchen remodel typically runs $14,000 – $45,000 installed, with cabinet installation alone landing at $4,000 – $13,000. When an Atlas cabinet box, drawer glide, or hinge fails, most owners find out the same way: a drawer that suddenly won’t close flush, a door that hangs a half-inch low, or a shelf pin that’s torn out of the side panel and won’t hold weight anymore. Santa Rosa’s inland heat and dry summers push wood and particleboard to move, which is often what turns a small hardware problem into a structural one. Rowan Construction Group Santa Rosa is an independent service provider and is not affiliated with Atlas.

Call (833) 842-1866

Which Atlas Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Atlas cabinetry has come in several lines over the years, and the part that fits a 2012 shaker door won’t necessarily fit a 2018 slab-front drawer. Before ordering anything, look inside the cabinet box for the manufacturer label, usually stapled to the back panel or the underside of the top rail. That label carries the series and, on many boxes, the box depth and side-panel thickness, which are what actually determine hinge and glide compatibility. Standard Atlas base cabinets use a 3/4-inch side panel, but some economy lines run 5/8-inch, and that 1/8-inch difference is a real compatibility gotcha – a standard European hinge cup won’t seat the same on both.

The OEM-versus-aftermarket call depends on the part. Hinges, drawer glides, and shelf pins have quality aftermarket equivalents that match Atlas spec and cost less, and we source those where they’re equal or better. Door fronts, face frames, and anything with a factory finish should go OEM if the line is still supported, because matching a stained or painted finish across two vendors is where owners waste money. We quote the part line by line either way, so you see what’s OEM and what isn’t before anything is ordered.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Atlas Kitchen Remodeling Is Failing

  • A drawer that won’t close flush or sags at the front. The glide or the glide’s mounting screws have pulled loose, usually because the particleboard around them has softened from moisture near the sink or dishwasher.
  • A door that hangs low or rubs the frame. The hinge has lost its adjustment or the hinge cup has cracked, which happens faster in Santa Rosa kitchens that see big seasonal swings between dry summer air and winter damp.
  • Shelf pins that won’t hold a loaded shelf. The pin hole has wallowed out. This is a structural failure of the side panel, not a hardware failure, and swapping the pin alone won’t fix it.
  • Soft spots, swelling, or a musty smell inside a base cabinet. Water has reached the particleboard core, often from a slow leak under the sink. Swollen board won’t go back to its original shape.
  • Doors and drawers that no longer line up after years of use. The box has racked out of square, common in older Santa Rosa homes where the floor has settled unevenly under a run of cabinets.

Replacement Cost & What’s Included

A remodeled primary bathroom with a soaking tub and walk-in shower

In Santa Rosa, cabinet installation runs $4,000 – $13,000, countertop installation $2,000 – $6,500, a backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A full kitchen remodel sits at $14,000 – $45,000, and a small kitchen remodel at $9,000 – $20,000. What drives the range is box count, whether the countertop and backsplash come out with the cabinets, and whether the layout changes (which means plumbing and electrical).

Every quote is a flat written price with a written scope before any work starts. The price you agree to is the price you pay, and no change moves forward until you’ve signed a change order for it. That’s the discipline that keeps a job within a few percent of the number you agreed to. The work carries our 365-Day Done Right Promise, printed on the page, not an asterisk.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

You can safely check most of this yourself. Open the cabinet and look for the label, measure the box depth and side-panel thickness, and take a photo of the failed hardware. Where DIY goes wrong is the repair: re-setting a hinge cup, re-drilling a torn-out shelf pin hole with a proper insert, or re-securing a glide into softened particleboard all take a jig and the right fasteners. A wrong pilot hole strips the panel for good, and a cabinet box is not a cheap thing to replace over a $4 hinge.

If water has reached the core, or the box has racked out of square, that’s a structural fix and we’d rather look at it than have you fight it. We also service KraftMaid, Cambria, and Silestone components. Call (833) 842-1866 for a free estimate.

FAQs

A single-story rear room addition with tall windows and a new patio

How long should Atlas kitchen cabinetry last? Expect 20 to 30 years from a well-built box with regular hardware upkeep, though in Santa Rosa the dry summers and damp winters wear hinges and glides faster than the box itself, so hardware is usually the first thing to replace.

Can the part be repaired instead of replaced? Often yes. A loose hinge or glide can be re-seated if the panel around it is sound. A torn-out shelf pin or a swollen base panel generally can’t be repaired, only reinforced or replaced, and we’ll tell you which one you’re looking at in the estimate.

How long does the swap take? Replacing hardware on a run of cabinets takes a few hours. Replacing a door front, a drawer box, or a damaged cabinet box takes longer, usually a day or more depending on finish matching and parts sourcing, and we’ll put that timeline in the written scope.

How do you source the Atlas part? We identify your line from the cabinet label, then source OEM if the line is still supported or a spec-matched aftermarket equivalent if it isn’t, and we quote the part line by line so you can see exactly what you’re paying for. Call (833) 842-1866 for the free estimate.

Schedule Your Santa Rosa Kitchen Estimate

If an Atlas cabinet, drawer, or door in your Santa Rosa kitchen has failed, we’ll identify the line from the label, price the part and the labor in a written quote, and put the timeline in writing before we touch anything. Our technicians have up to 19 years of experience. Call (833) 842-1866 for a free estimate.

Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patioA new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA new clay tile roofNew double-hung windows in a dining room

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch