A Rowan company - serving Santa Rosa, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
American Standard · Santa Rosa

American Standard Bathroom Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

American Standard Bathroom Remodeling: The Santa Rosa Owner’s Guide

If you have an American Standard fixture in a bathroom that’s failing, we remodel that bathroom around it, or replace the fixture outright, for $9,000 to $28,000 installed in Santa Rosa. That price covers demolition, waterproofing, tile, setting, finish plumbing, and disposal, and it holds, in writing, before anyone lifts a tool. Free estimates are scheduled during normal working hours.

Call (833) 842-1866

Most owners don’t come to this page because they want a remodel. They come because something leaked. A supply line gives out under an American Standard Cadet and puts water across the floor. The caulk joint at the base of an older American Standard tub starts wicking moisture into the wall behind it. The ceramic disc cartridge in a Colony faucet stops returning to center and the drip won’t stop. Santa Rosa’s water runs hard in stretches, and older homes in the McDonald and Bennett Valley areas still have copper and galvanized plumbing upstream of that fixture, so those connections take the wear first. By the time you’re looking at the floor, you’re usually weighing repair against replacement.

Which American Standard Models This Applies To

A tile setter installing wall tile in a shower

American Standard sells across more model lines than most owners realize, and the parts don’t cross over cleanly. Toilets run from the Champion and Champion 4, the Cadet Pro, and the Colony, each with its own fill valve and flush assembly. Faucets split between the Ceramix cartridge used in Colony and single-handle lines, and quarter-turn ceramic disc valves used in others. Tubs and shower valves sit in their own category again, and the trim for a two-handle valve won’t fit a single-handle body.

Before you order anything, find the model plate. On toilets it’s usually stamped on the inside of the tank bowl, sometimes under the lid. On a faucet, pull the handle and look for the cartridge face, then match the part number on the replacement against the one printed there. American Standard’s own part numbers differ by two or three digits between series, and a cartridge that looks identical in a photo can have a different stem length or spline count.

OEM American Standard parts are reliable and easy to source. Quality aftermarket equivalents, made to the same cartridge spec, are available for about half the price and perform comparably for a supply line or fill valve. For a ceramic disc cartridge inside a valve body, we go OEM, because the tolerance matters and a mismatched part wears the seat faster. We’re an independent remodeling contractor, not affiliated with American Standard, so we’ll tell you plainly when OEM is the right call and when it isn’t. We don’t stock parts and we don’t keep them on a truck. We source what your model needs, verify it against the plate before the crew arrives, and the written price includes the part.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your American Standard Bathroom Remodeling Is Failing

  • A drip you can’t stop by closing the valve harder. On a single-handle American Standard faucet, this is usually the ceramic disc cartridge. The disc seat scores after years of hard water, so closing it fully doesn’t stop flow. On a two-handle, worn stem washers cause it instead.
  • Water pooling at the base of a tub or shower. The caulk bead at the floor joint has failed, and water is getting under the tub or behind the surround. This is the most common call we get from Santa Rosa homes built in the 1980s and 1990s, where the original caulk has long since given up.
  • A toilet that runs on its own, fills slowly, or won’t stop cycling. The flapper has stiffened or the fill valve float has gone heavy. A running American Standard Champion can pass several gallons a day, which shows up on the Santa Rosa water bill before the owner notices the sound.
  • Rust staining at a fixture seam, valve escutcheon, or supply connection. A ferrule or compression fitting is seeping. On old copper this can turn into a pinhole leak behind the wall if it’s left alone, and by then the drywall and tile are gone too.
  • Loose, wobbly, or leaking shower valve trim. The cartridge or the trim ring has moved or cracked. If you can move the handle without resistance, the cartridge has worn and the valve body may need attention, which is a scope decision, not a parts swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

A full bathroom remodel in Santa Rosa runs $9,000 to $28,000. A small bathroom, roughly under 50 square feet, runs $5,000 to $12,000. If you’re replacing just the shower or the tub, the numbers break out like this:

Scope Installed price range
Full bathroom remodel $9,000 – $28,000
Small bathroom remodel $5,000 – $12,000
Walk-in shower installation $4,500 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Shower replacement $3,000 – $8,500
Bathroom vanity installation $800 – $3,000

What drives the range is the substrate. Pulling tile off the wall often exposes the old cement board and waterproofing, which is where the trailer price meets reality. Water damage, curb and pan rebuilds, and moving the supply or drain line all add labor. The written quote is flat, with the part or fixture named and the scope spelled out. If we find rotted framing behind the tile, you get a written change order to sign before we touch it. No change proceeds without it.

DIY or Call Us?

Replacing a fill valve or a flapper on an American Standard toilet is a reasonable DIY job, and replacing a faucet cartridge is doable if you shut the water off and follow the model plate. What goes wrong in Santa Rosa is the plumbing behind the wall. If a supply line won’t come loose, or the valve body is corroded, an owner forcing it can turn a small drip into a flooded floor and a drywall repair. Anything that requires opening a wall, pulling a tile surround, or working a stuck shower valve body is a job for someone with the right tools and a plan.

Running water under a tub or shower pan is more serious. Once the pan is compromised, the subfloor absorbs the leak, and it doesn’t show up until the floor is soft or the moisture reaches the room below. That’s a remodel scope, not a repair. The value of the American Standard name only helps if the fixture is properly installed on a sound substrate.

Call (833) 842-1866 to schedule a free estimate. We’ll tell you what we found and what’s actually failing, with a photo record of the conditions so you have the evidence, and a written price before any work starts.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new black aluminum pool fence with a gateA new curved paver walkway to the front porchA standing-seam metal roof over a covered porchA new bay window with a cushioned seatA new wood side gate with black hardwareA new concrete driveway with a paver border

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch