







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Kitchen Remodeling: The Santa Rosa Owner’s Guide
Ameristar-compatible kitchen remodeling in Santa Rosa typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop material, and whether the electrical and plumbing get moved. If you have an Ameristar cabinet, fixture, or appliance package that’s failed or is failing, we match the specific model and quote the replacement in writing before anyone touches a tool. We are an independent contractor, not affiliated with Ameristar, but we know the product line well enough to tell you what’s actually in your kitchen.
Owners usually find out something’s wrong slowly. A cabinet door that won’t sit flush after two years. A drawer that rubs when the weather turns damp. A faucet supply line weeping behind the kickplate. Santa Rosa’s marine-influenced climate swings from wet winters to dry, hot summers and back, and the materials in a value-tier kitchen feel that cycle more than most people realize.
Key Takeaways
- Ameristar-compatible kitchen remodeling in Santa Rosa: $14,000 – $45,000 installed.
- Cabinet installation alone: $4,000 – $13,000. Countertops: $2,000 – $6,500.
- We quote flat price with written scope before work starts, and no change proceeds without a signed change order.
- Written price, photo record, and warranty are standard, not add-ons.
Which Ameristar Models This Applies To

Ameristar is a value-tier cabinet and kitchen product line sold through big-box retail and dealer channels, so the first thing we do is figure out which series you actually have. The model label lives inside the cabinet door on the back panel, on the upper cabinet’s inside side wall, or on the drawer box itself. Read that sticker, photograph it, and you’ll have the series name, size code, and finish code we need to match a replacement part.
Where it gets tricky: Ameristar sizes are nominal, not exact. A “24-inch” base cabinet can measure 23-3/4 inches of box, and the door overlay (partial vs. full) determines whether a replacement door will fit the frame you have. Getting that wrong is the single most common ordering mistake we see. We measure the box, the door face, and the hinge bore location before we order anything, because the Ameristar hinge pattern has shifted across production runs.
On the OEM-versus-aftermarket question: for doors and drawer fronts, an OEM match is usually worth the wait, because finish and grain have to match the rest of the run. For hinges, drawer slides, and internal hardware, a quality aftermarket equivalent (Blum, Grass, or comparable) is often better than what came on the cabinet in the first place. We’ll tell you which way to go on each part, and we source across fifty-plus vetted brands including KraftMaid and Cambria when an Ameristar match isn’t the right call.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Ameristar Kitchen Remodeling Is Failing
- Cabinet doors that won’t stay closed or won’t sit flush. Usually a worn hinge, or a hinge that has pulled out of soft particle board around the screw. The board, not the hinge, is often the real problem.
- Drawers that rub, stick, or sag at the front. The slide has worn, or the drawer box has absorbed moisture and swelled. In Santa Rosa’s wet season, a drawer that worked in October can bind by January.
- Delamination at the cabinet frame or door edge. Thermal-foil and laminate finishes lift where moisture gets behind the edge. Once it lifts, it doesn’t go back down, and it grows.
- Sagging countertop seam or caulk line that keeps reopening. The cabinet run has settled, or the substrate under the counter has failed. Re-caulking hides it for a month. It won’t fix it.
- A water stain under the sink cabinet floor. Usually a supply line, a P-trap, or a poorly sealed disposal flange. Left alone, it rots the cabinet base from the inside out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the honest Santa Rosa pricing. Every number below is a flat written price for the scope described, delivered before work starts, and every job closes with a written warranty.
| Scope | Installed price range |
|---|---|
| Full kitchen remodel (Ameristar-compatible) | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: number of cabinet boxes, whether you’re matching an existing run or replacing the whole layout, counter material (laminate sits at the low end, quartz at the high), and whether plumbing or electrical has to move. What’s included on every job: the written flat price, the scope in writing, a documented photo record of what we found and what we did, and the 365-Day Done Right Promise.
DIY or Call Us?
Some things you can safely check yourself. Open and close every cabinet door and drawer and note which ones bind. Photograph the model label. Look under the sink with a flashlight for staining or active weeping. Measure the box of any cabinet you want to match. Those four steps take ten minutes and make the quote faster.
Where DIY goes wrong: replacing a hinge into stripped particle board without reinforcing the screw hole, swapping a countertop without checking that the cabinet run is level, and any work behind a live faucet or disposal circuit. That last one is where we flag it plainly. If you’re touching anything on the electrical side of a kitchen remodel, shut the breaker and call a licensed electrician. It’s not a scare tactic. It’s a real hazard.
If you want a written price that holds, call (833) 842-1866 and we’ll walk the kitchen with you.
FAQs

Expect 10 – 15 years from the cabinet box and 5 – 8 years from the hinges and drawer slides under normal use. Santa Rosa’s wet-dry seasonal swings work on the cabinet frame and finish more than a stable climate would, so the hardware is usually the first to go, then the door finish at the edges.
Often, yes. A single failing hinge, drawer slide, or door can usually be swapped without touching the rest of the run, and that’s a fraction of a full kitchen remodel cost. Once delamination or water rot has reached the cabinet box, replacement is usually the better spend. We’ll tell you which one you’re looking at before we quote. Call (833) 842-1866 for a free estimate.
A single door or drawer replacement is a same-visit job. A cabinet installation runs two to four days. A full Ameristar-compatible kitchen remodel with countertops and backsplash is typically two to four weeks, depending on material lead times. The written scope names the days before we start.
We pull the model label from your cabinet, confirm the size code and finish code, and order against that exact spec. If the part is discontinued, we source the closest match across our fifty-plus vetted brands including KraftMaid, Cambria, and Silestone, and we show you the sample before we order. No guessing. Call (833) 842-1866 and bring your label photo.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












