







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Bathroom Remodeling: The Santa Rosa Owner’s Guide
If your Santa Rosa bathroom has a failing or missing piece that traces back to a Barrette product, we can identify it, price it, and install a compatible replacement: a full bathroom remodel runs $9,000 – $28,000 in Santa Rosa, and a targeted part swap or finish repair is quoted as a flat written number before any work starts. We’re an independent contractor and not affiliated with Barrette – we work with the brand, not for it. Most owners find the problem the same way: a walk-in surround cracks along the drain, a vanity top chips at the edge, a shower pan feels soft underfoot, or a caulk line keeps splitting no matter how many times it’s redone. Under Clause 1 of The Haven Standard, you get the written price first – always.
Which Barrette Models This Applies To

Barrette makes finished bath products – surrounds, pans, vanity tops, and trim – and the part you need depends on the exact line, not just the brand. The reliable way to identify yours is the sticker or etching on the back of the panel or the underside of the pan; if that’s gone, measure the unit’s finished dimensions and the drain centerline. Barrette drains sit at a specific offset from the wall and differ between series – measure twice, because a pan that’s off by a half inch won’t seat. Note the surround seam pattern and the wall thickness too.
Once you have the model or dimensions, the OEM-versus-aftermarket choice matters. OEM parts match color and fit exactly but cost more and can take weeks to order. Quality aftermarket pans and surrounds from brands like Kohler and Toto are often available sooner and can save $200 – $600 on a project. We’ll show you both numbers in writing. Rowan also sources across KraftMaid, Cambria, and Silestone for any vanity or countertop tie-in, so the Santa Rosa bathroom comes together under one written scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Bathroom Remodeling Is Failing
- Hairline cracks radiating from the drain: flex in the pan underfoot, common in older fiberglass units – the substrate has likely moved.
- A soft or springy shower floor: water has gotten under the pan and the subfloor is compromised; this needs a professional look before it spreads.
- Caulk that keeps splitting at the wall seam: the surround has separated from the wall, often because the backing wasn’t solid or dried out.
- Chipping or delamination at the vanity top edge: years of moisture and edge impact on the laminate or cultured surface.
- Yellowing or staining that won’t scrub out: the gel coat has worn thin and the surface is porous; refinishing rarely lasts.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s the number, in writing, before anyone picks up a tool. These are installed Santa Rosa ranges, parts and labor together:
| Work | Installed Range |
|---|---|
| Full bathroom remodel | $9,000 – $28,000 |
| Small bathroom remodel | $5,000 – $12,000 |
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement | $3,000 – $8,500 |
| Tub-to-shower conversion | $3,500 – $10,000 |
| Vanity installation | $800 – $3,000 |
What moves the range: the condition of the subfloor and wall backing, whether the drain needs to relocate, and whether you choose OEM or quality aftermarket parts. The quote is a flat price with a written scope – no change proceeds without a signed change order. The work carries the 365-Day Done Right Promise, and every visit includes a documented photo record at no charge.
DIY or Call Us?
You can safely check the model sticker, measure the unit, and photograph the damage for us. What goes wrong with DIY on a bath replacement is the waterproofing and the drain connection – a pan set without a proper subfloor and correct drain sealing will leak into the ceiling below, and by the time you see the stain you’re into a subfloor repair. Removing a glued surround or a set pan can also crack the tile and wall behind it, turning a part swap into a rebuild. If the floor feels soft, stop and call.
Call (833) 842-1866 for a free estimate – we’ll identify your Barrette part, show you the OEM and aftermarket options, and give you the flat price in writing.
FAQs

How long does a Barrette shower pan or surround last? A properly installed fiberglass pan lasts about 15 – 20 years in Santa Rosa’s indoor bath climate; the frequent wet-dry cycle is what wears the gel coat thin over time. If yours is older and feeling soft, call (833) 842-1866 for a free estimate.
Can the part be repaired instead of replaced? Sometimes – a small crack in a solid pan can be repaired, but a soft floor or a worn gel coat usually can’t be saved over the long run. We’ll tell you honestly which you’re looking at. Call (833) 842-1866 for a free written quote.
How long does the swap take? A shower pan or surround replacement is typically a 1 – 3 day job once parts are on site; a full remodel runs longer. We give you the timeline in writing with the price.
How do you source the correct Barrette part? We match your model number or exact measurements against the current Barrette line and quality aftermarket equivalents, then show you both prices in the quote – no guessing, no “call for a price.” Call (833) 842-1866 for a free estimate.
To get your Barrette bathroom part identified and priced, call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. You’ll get a flat written price, a written scope, and a photo record of what we found before anyone starts.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












