







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Santa Rosa Owner’s Guide
We install Barrette-compatible kitchen remodeling in Santa Rosa, and a full kitchen typically runs $14,000 – $45,000 installed, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Whether a failing cabinet door, a sagging drawer box, or a worn hinge box is what brought you here, the price is written before any work starts. Most Santa Rosa homeowners find us the same way: a Barrette cabinet door that no longer sits flush, a drawer that jumps its slide, or a hinge that has torn the mounting screws clean out of the stile after a wet winter of swelling and shrinking. This page is about identifying exactly what you have, matching the part correctly, and getting a documented fix.
Key Takeaways
- Barrette cabinet hardware and components are model-specific; the label inside the door is the single most useful thing you can photograph.
- Installed kitchen remodeling in Santa Rosa: $14,000 – $45,000. Cabinet-only work: $4,000 – $13,000.
- We are an independent service provider, not affiliated with Barrette. We install and repair across fifty-plus vetted material brands, including KraftMaid and Cambria.
- Every visit ends with a documented photo record and a signed change order if anything changes mid-job.
Which Barrette Models This Applies To

Barrette’s cabinet and component lines span a wide catalog, and the practical problem is that two doors from the same manufacturer can use different hinge boring patterns and different drawer slide lengths depending on when they were made. The identifying label is usually a small sticker inside the door or on the back of the drawer box: it carries the series name, a finish code, and often a production date. Photograph it before anything else. If the label is gone, we measure the door overlay (the amount the door covers the cabinet face frame), the hinge cup bore (commonly 35mm), the hinge center-to-edge distance, and the drawer box height and depth. Those four numbers narrow a replacement down quickly.
Here’s the OEM-versus-aftermarket decision for Barrette specifically. OEM parts keep the original fit but can be slow to source or discontinued for older series, and a discontinued finish is the most common dead end we hit in Santa Rosa. A quality aftermarket hinge or slide from a name with published load ratings is often the better call for a working kitchen: it is standard-sizing, it is available, and it comes with a spec sheet you can read. We don’t stock parts and we don’t carry them on the truck; what we do is measure on site, source the right match, and install it against a written scope so you know exactly what is going in.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
Symptoms tell you which component is at fault. Read the cause next to each one.
- Doors that won’t stay adjusted. The hinge screws have stripped their holes in the cabinet stile, usually because the wood swelled in damp weather and the screw threads wore the soft material. Tightening them buys a week, not a fix.
- Drawers that bind or jump the track. A worn slide or a drawer box that has racked out of square. Barrette drawer boxes are dimension-specific, so a wrong-height replacement will rub the cabinet face.
- A soft spot or delamination near the sink or dishwasher. Moisture has reached the particleboard or MDF core of the door or panel. This is a replacement, not a filler-and-paint job, because the swelling won’t come back down.
- Contact-paper or veneer lifting at the edges. Heat and humidity cycling, common in Santa Rosa kitchens with a west-facing window. Once the veneer edge fails it lifts progressively.
- Cracks at the hinge cup or drawer-pull screw holes. Fastener stress on aged material. A cracked door or box is a structural failure, even if it still opens.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Santa Rosa, installed kitchen remodeling runs $14,000 – $45,000. If you’re after a single component, cabinet installation is $4,000 – $13,000, countertop installation $2,000 – $6,500, a backsplash $800 – $2,500, and a kitchen island $3,000 – $10,000. A small kitchen remodel sits at $9,000 – $20,000.
What drives the range: cabinet count and box quality, the finish (a factory finish and a field-painted finish are not the same line item), whether plumbing or electrical moves to suit a new layout, and whether the countertops are a 2cm or 3cm slab. Our quotes are flat, line-itemized, and written before any tool comes out. Every change gets a signed change order first, so the number you agreed to is the number you pay, within a few percent. The work carries our 365-Day Done Right Promise, and you get a documented photo record of what we found and what we did on every visit.
DIY or Call Us?
Some of this you can safely check yourself. Open and close every door and drawer and note which ones drag, photograph the label inside the door, and measure the hinge cup bore and drawer box height. That information makes a quote faster and more accurate. Where DIY goes wrong on kitchen cabinetry is in the source of the failure: a stripped hinge screw feels like a screw problem and is usually a moisture-and-substrate problem, so the new hardware fails the same way in a season. Cabinet boxes, countertop removal, sink and plumbing disconnection, and fixing a racked box are not homeowner tasks, and getting them wrong cracks stone or floods a cabinet base. Call (833) 842-1866 and we’ll give you a straight answer on what actually needs replacing versus what just needs an adjustment.
FAQs

Expect 10 – 15 years from standard cabinet doors and drawer components in a Santa Rosa kitchen before finish and hardware failures show up, and longer on the boxes themselves. Santa Rosa’s wet winters and warm, dry summers cycle humidity through the cabinet fronts, and that cycling is what ages hinges, slides, and veneer edges first. Call (833) 842-1866 for a free estimate on replacement.
Sometimes. A hinge that has slipped its adjustment or a slide with a loose clip is a repair; a stripped-screw hole, a delaminated door edge, or a cracked box is a replacement because the material has failed. We’ll tell you which one you’re looking at before you spend money. Call (833) 842-1866 for an exact quote, estimates are free.
A single door, drawer box, or hinge set is usually a short visit, while a full cabinet installation runs multiple days depending on layout and whether countertops or plumbing are involved. We write the schedule into the scope so there are no surprises. Call (833) 842-1866 to book your free estimate.
We identify your series from the label or from on-site measurements of the overlay, hinge bore, and drawer box dimensions, then source an OEM or a spec-matched aftermarket part and put it in writing before installing. If the finish is discontinued, we say so up front and show you the alternatives. We also work across fifty-plus vetted brands, so if you want to compare against KraftMaid, Cambria, or Silestone, the quote does that too.
If a Barrette cabinet or kitchen component in your Santa Rosa home has failed, start with a free estimate. Call (833) 842-1866 to schedule yours. We’ll measure on site, hand you a written flat price before any work starts, and back it with our 365-Day Done Right Promise. Bring a competitor’s written quote if you have one, and we’ll go through it line by line at no charge. Rowan Construction Group Santa Rosa serves homeowners across Santa Rosa and the surrounding areas.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












