A Rowan company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
T
Therma-Tru · Santa Rosa

Therma-Tru Windows & Doors in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
New double-hung windows in a dining room
A new front entry door with glass sidelights
A galley kitchen opened up to the dining room with a new peninsula
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new wood side gate with black hardware
A new concrete driveway with a paver border
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Therma-Tru Windows & Doors: The Santa Rosa Owner’s Guide

We install and service Therma-Tru-compatible windows and doors throughout Santa Rosa, and full door replacement (slab or prehung) typically runs $4,500 – $15,000 installed, while impact-rated window installation runs $8,000 – $25,000. Single-part repairs – a failed multipoint lock, a broken hinge, a worn sill or sweep – usually fall well below those figures and can often be scheduled within the same week. Therma-Tru entry doors are among the most common front doors we see on homes built or remodeled in Santa Rosa between 2005 and 2020, and most owners discover a failing part the same way: the door stops latching clean, a draft appears at the bottom corner, or the deadbolt won’t turn without lifting the handle.

Call (833) 842-1866

Which Therma-Tru Models This Applies To

A new multi-panel patio door opening a kitchen to the patio

Therma-Tru’s fiberglass entry systems (the Fiber-Classic and Smooth-Star lines) and their steel lines (the Traditions series) each use different hinge, lock, sill and weatherstrip geometry, so the part you need depends on the series, not just the door style. The model and series are stamped on a label inside the door jamb or on the top hinge-side edge of the slab – pull the door open and look at the hinge stile. If the label is gone, measure the door slab thickness, the backset of your lockset (2-3/8″ or 2-3/4″), and the sill width; those three numbers get you most of the way to the right part.

For Therma-Tru specifically, the OEM-versus-aftermarket decision matters more than it does with some other brands. Therma-Tru’s multipoint lock hardware and their adjustable sill systems have proprietary mounting patterns, and generic replacements often fit the hole but never seal or align properly. Aftermarket weatherstrip and sweeps are usually fine and cost less; OEM lock and sill components are worth the extra dollars because the tolerances aren’t interchangeable. We order the correct part for your exact series and confirm the fit before we arrive.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Therma-Tru Windows & Doors Is Failing

  • The door won’t latch without lifting the handle. That’s usually a hinge that has sagged or a strike plate that has shifted out of alignment – the strike no longer catches the latch bolt squarely, which happens when the jamb swells or the hinge screws loosen over time.
  • A draft or daylight at the bottom corner. Therma-Tru’s adjustable sill and door sweep wear thin against the threshold; in Santa Rosa’s foggy winters, that gap lets cold air and moisture in and can fog the glass edge.
  • The deadbolt binds or the lock feels stiff. A worn multipoint or mortise lockset, or a door that has swelled with the season, puts pressure on the bolt. Left alone, the bolt eventually won’t throw at all.
  • Weatherstrip peeling or flat. The magnetic or foam seal loses its shape after years of compression and sun exposure, so the door closes but doesn’t seal – one of the most common calls we get after the first cool snap.
  • Glass fogging between the panes. A failed insulated glass unit (seal broken at the edge) means the argon escaped; the glass itself is fine but the unit needs replacing, not the whole door.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Every Therma-Tru part swap or door replacement we quote gets a flat written price before anyone starts – no “call for a quote,” no surprise number after the truck leaves. For Santa Rosa, a full door replacement (slab or prehung, standard hardware) runs $4,500 – $15,000 depending on the door, frame condition and whether trim and finish are included. A full window replacement runs the same range, and impact-rated window installation runs $8,000 – $25,000. Single-part repairs – lockset, hinge, sill or weatherstrip – are quoted individually and priced by the part plus the documented labor to fit and test it.

The range moves with a few real factors: fiberglass versus steel, whether the frame is sound enough to reuse, and whether the opening needs reframing. Every price we write includes the parts cost, the labor, and a written warranty on the work. If the part isn’t the right fit when we test it on arrival, you don’t pay for our ordering mistake.

DIY or Call Us?

A homeowner can safely do a few things here. Measure the slab and backset, photograph the hinge stile label, check whether the strike plate screws are snug, and test the door swing with a level across the top rail. Those checks tell you what part you’re dealing with and cost nothing.

Where it goes wrong is the part that needs real alignment work. A Therma-Tru door that sags or won’t latch square to the frame needs the hinge and strike plate reset in the right plane – hammering the strike plate tighter usually solves the symptom for a week and then the door binds worse. Adjustable sill systems require the right shims under the right corners, and a multipoint lock that gets forced instead of fitted will fail again. Fitting glass or replacing the whole unit is beyond a homeowner’s toolkit. We carry the test gauges and the parts know-how to get the geometry right the first time. If you’re not sure, call us and we’ll tell you plainly whether it’s a parts swap or a full replacement – no pressure either way.

FAQs

A single-story rear room addition with tall windows and a new patio

How long does a Therma-Tru door or window part last in Santa Rosa? Most Therma-Tru hardware (hinges, locksets, weatherstrip) lasts 10 – 15 years under normal use, but in Santa Rosa’s coastal fog and seasonal wet/cool cycles, weatherstrip and sills degrade faster, often in 7 – 10 years. Sun exposure on south- and west-facing doors can shorten that further. If it’s been 10 years or more, it’s worth having it looked at before it fails mid-winter.

Can the part be repaired instead of replaced? Often yes. A stiff lock can usually be cleaned and realigned; a sagging hinge can be reset; weatherstrip and sweeps replace cleanly. What generally can’t be repaired is a seal-broken insulated glass unit – the glass needs replacing. We’ll tell you on the visit which it is, and quote both lines so you can decide.

How long does the swap take? A single lockset, hinge, sill or weatherstrip replacement typically takes under two hours on site. Sill and lockset work runs a bit longer because of the fit-and-test. A full door replacement runs most of a day. We confirm a window before we arrive and show you the photo record of what was found and what was done when we leave.

How do you source the part? We order by your exact Therma-Tru series and model from the label or your measurements, confirm the fit before the visit, and bring the correct part plus a like-for-like spare in case the opening measures differently than the label says. If we’ve misread the part, we get the right one and you don’t pay for the return trip.

If your Therma-Tru door or window has a part that’s failing, call (833) 842-1866 for an exact quote – estimates are free, the price is in writing before any work starts, and you get the 365-Day Done Right Promise behind every job. We also work with KraftMaid, Cambria and Silestone on the same terms.

Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new stained cedar privacy fenceA new paver patio with a seat wall and fire pitA remodeled primary bathroom with a soaking tub and walk-in showerA new clay tile roofA new front yard fence with a matching gateA new paver pool deck

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch