







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Santa Rosa Owner’s Guide
ES Windows roofing components are served through Rowan Construction Group Santa Rosa as an independent service provider, not an ES Windows dealer or affiliate. Most ES Windows roof-side parts that fail in Santa Rosa are the flashing kits, roof windows, and skylight assemblies that sit against the deck and take the weather. Typical installed pricing runs from $400 – $1,800 for a targeted roof repair and $8,000 – $20,000 for a full roof replacement when the surrounding field has aged out with the part.
Owners usually find the problem the same way. A brown ring appears on the ceiling drywall after a storm, or the interior trim around a skylight wells up with condensation on a cold morning. Sometimes it’s simpler: a roofer on the roof for something else points at lifted flashing and says the seal is gone. In Santa Rosa, the wet-season pattern matters. Our rain arrives in concentrated bursts from November through March, and a flashing detail that survived a dry summer will announce itself the first time water backs up against it.
What you get from us before any work begins is a written price and a written scope. Under Clause 1 of the Haven Standard, the price is on paper before a tool comes off the truck, and no change happens until you sign a change order.
Key Takeaways
- ES Windows roof components fail most often at the flashing and seal, not the panel itself.
- Installed repair in Santa Rosa runs $400 – $1,800; full replacement runs $8,000 – $20,000.
- We’re independent of ES Windows and match parts to your model by measurement and label, not guesswork.
- You get a documented photo record on every visit, showing what we found and what we did.
Which ES Windows Models This Applies To

ES Windows builds roof windows, skylights, and flashing kits across several product lines, and the part you need depends on which line is on your roof. The reliable way to identify it is to find the data plate. It’s usually on the interior frame of a roof window or the curb of a skylight, and it carries the model number, the glass code, and the date of manufacture. Photograph it before you call anyone. That single photo saves a return trip.
If the plate is gone or painted over, measure the rough opening and the visible glass, then measure the curb height if there is one. ES Windows sizes are nominal and a quarter-inch of drift between a nominal and actual measurement is the difference between a part that seats and one that leaks. Bring us those numbers and we’ll confirm the match before ordering.
On the OEM-versus-aftermarket question, our honest position is this: for structural flashing and curb components, use the ES Windows part or an exact-equivalent made to the same spec. Aftermarket flashing that’s “close enough” is the single most common cause of a second leak within two seasons. For gaskets, sealants, and trim, a quality aftermarket equivalent is fine and often cheaper. We source across fifty-plus vetted brands and keep the written quote honest rather than inflated. We also serve KraftMaid, Cambria, and Silestone cabinets and counters on the interior side, so if a leak has damaged cabinetry below a skylight, one written scope can cover both trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
Each of these symptoms points to a specific failure, and knowing the cause helps you ask the right questions.
- Water staining on the ceiling near the unit. The flashing seal has broken down, letting water track under the shingles and along the deck. Staining shows up late in the process, so the leak started weeks or months earlier.
- Condensation on the interior glass in cold weather. The seal between the panes has failed and the insulating gas has escaped. The glass unit needs replacing even if it doesn’t leak.
- Lifted or curled flashing at the curb. Adhesive or sealant has aged out and the metal is no longer seated. This is the highest-risk stage, because the next storm finds the gap.
- Visible daylight or a draft at the frame. The frame has shifted, often because the surrounding decking has swelled or softened. The fix is structural, not cosmetic.
- Granule loss or cracking on surrounding shingles. The field has aged out with the part. In that case, patching one spot may be throwing money at a roof that’s ready for replacement.
In Santa Rosa, we regularly see spring failures that trace back to water that sat against a flashing detail all winter. The damage gets attributed to the first warm rain in April, but the cause is a seal that gave out in January.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here are the ranges we quote in Santa Rosa, with the parts-and-labor split stated plainly in the written scope.
| Scope | Installed Range |
|---|---|
| Targeted roof repair (flashing, seal, small leak) | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range: the model and glass spec of the unit, whether the decking underneath is sound, the number of shingle layers already on the roof, and whether the leak has reached interior finishes. A repair that stays on the roof is at the low end. A repair that involves replacing decking or an interior section of drywall is at the high end.
The flat written price covers labor, materials, and cleanup, and it’s fixed before work starts. The 365-Day Done Right Promise backs the work: if it’s not done right, we make it right, and the guarantee is printed on the terms page, not buried in an asterisk. Every visit ends with a documented photo record you keep.
DIY or Call Us?
Roof work sits at height, on a wet or steep pitch, and that alone makes it a job for someone with fall protection and a reason to be up there. We say this plainly because it’s true, not to sell you anything. On a single-story, low-pitch section, you can safely check for staining, look at the flashing from a ladder set on level ground, and photograph the data plate on the unit. Don’t walk a wet roof, don’t reseal flashing from above without understanding how the layers lap, and don’t try to reset a glass unit yourself. The most common DIY outcome we see is a flashing repair that reopens in the next storm, and by then the decking has taken on water.
What you can do safely is measure, photograph, and call. Call (833) 842-1866 and we’ll talk through what you found, then set a free estimate. If you have a written estimate from another roofer, bring it and we’ll review it line by line at no charge.
FAQs

Flashings and seals typically hold for 15 to 20 years in Santa Rosa’s climate, and glass units often fail earlier if the seal leaks. The wet-season concentration here ages a flashing detail faster than a dry inland climate would, so a seal that’s 12 years old is worth inspecting before winter. Call (833) 842-1866 for a free inspection and a written price before anything is ordered.
Often yes. If the flashing seal has failed but the metal and the curb are sound, we can reseat and re-seal the flashing without replacing the unit. If the glass unit has lost its seal or the frame has shifted, replacement is the more durable choice. The written scope tells you exactly which one we’re recommending and why, before work starts.
A targeted flashing or seal repair is usually a single day, and a full unit or glass replacement can run one to two days depending on the model and deck condition. A full roof replacement is a multi-day job. We give you the schedule in writing with the price, and we don’t promise same-day on planned work – the estimate tells you the real timeline.
We identify the part from the data plate photo or your rough-opening and glass measurements, then confirm the match before ordering. For structural flashing we use the ES Windows part or an exact-spec equivalent; for gaskets and trim we may substitute a quality aftermarket part that meets the same spec. The written scope lists every part by name and dimension. Call (833) 842-1866 to start the match; estimates are free.
When a roof-side part fails, the fix is usually smaller than the worry. The trick is knowing exactly which part, in exactly which size, and getting it installed on a written price before the next rain. Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. Bring us your data plate photo, your measurements, or a competitor’s written quote for a free line-by-line second opinion.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












