







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Bathroom Remodeling: The Santa Rosa Owner’s Guide
Bathroom remodeling built around CWS materials in Santa Rosa typically runs $9,000 to $28,000 installed, depending on how much of the room changes and which CWS series is already on the walls and floor. A small bathroom comes in at $5,000 to $12,000, a walk-in shower at $4,500 to $12,000, and a tub-to-shower conversion at $3,500 to $10,000. We’re an independent Santa Rosa contractor, not affiliated with CWS.
Most owners don’t arrive at this page hunting a part number. They arrive because the tile over the shower surround has started to feel spongy underfoot, or the grout line at the tub apron has turned a color that won’t scrub out. Nine times out of ten, the surface looks fine and the problem is underneath it: a failed waterproofing membrane, a backer board that has been wicking moisture for months, or a valve cartridge that has quietly been dripping inside the wall. The finish is the last thing to fail and the first thing you notice. At $9,000 to $28,000 for a full remodel here, we understand wanting to know exactly which layer failed before you spend the money. Our technicians, with up to 19 years of experience, diagnose that with a photo record before anyone quotes a number.
Which CWS Models This Applies To

CWS made a wide spread of bath products over the years, and the compatibility questions we field most in Santa Rosa come down to three things: the trim line of a valve, the size of a shower pan, and the thickness of the surround panel. A common gotcha is the shower valve trim cartridge. A replacement cartridge that fits one CWS valve body often won’t fit the next series up, even though the handles look identical. The only reliable way to match it is to pull the trim plate and read the stamping on the brass body, not the code on the handle. We measure the pan’s true dimension at the drain center and the wall-to-wall opening before ordering anything, because a 60-inch pan that’s off by a half inch won’t sit flush against the studs.
For a full remodel the OEM-versus-aftermarket call is less about the part and more about the substrate. We don’t need a factory part to rebuild a shower correctly, but we do need to match the backer board and membrane to what’s already there or remove it and start clean. On those decisions we’ll show you the brand options before quoting: KraftMaid or Wellborn cabinets for a vanity, Cambria or Caesarstone for the countertop, and Kohler or Toto fixtures for the toilet and sink. It’s your call, priced line by line.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Bathroom Remodeling Is Failing
- Soft or flexing floor tile near the shower. Water has gotten under the tile and into the subfloor, usually from a failed pan liner or a missing pre-slope. By the time you feel the give, the plywood is already compromised.
- Grout that re-stains within days of cleaning. Moisture is wicking up from behind the tile. Clean it all you want – the source is behind the wall, not on the surface.
- A persistent musty smell after every shower. That’s trapped moisture in a wall cavity or under a pan, and it’s the most reliable early sign of a shower that will need a rebuild.
- Water staining on the ceiling below or the wall behind. A leaking valve cartridge or a failed pan seal, and it needs attention before the framing absorbs it.
- Loose or lifting surround panels. The adhesive or backer under the panel has failed. Re-gluing the panel hides the problem for a season and returns it the next.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what a Santa Rosa bathroom remodel runs, itemized, so you can compare it against any other quote on your counter:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives the spread: whether the walls open up, whether the valve and drain move, tile versus a pre-formed surround, and cabinet and countertop grade. Every quote we write is a flat price with a written scope and a written warranty before anyone picks up a tool. No change proceeds without a signed change order, which is how projects land within a few percent of the agreed number. Labor and parts are separate lines you can read. Free second opinion on any written estimate, reviewed line by line.
DIY or Call Us?
There’s real work a homeowner can safely do here: read the valve body stamping, measure the pan, photograph the failure, and clear and re-seal a caulk line that’s simply worn. Where DIY goes wrong on a bathroom is the part you can’t see. Replacing a shower valve cartridge means isolating water, and if the valve body is seized, forcing it can crack the body inside the wall and turn a $200 fix into a wall-open repair. Removing a surround panel to check the backer often damages the panel beyond reuse, leaving you with an open wall and no plan. We’d rather you stop before that point. If you’re unsure whether the problem is surface or structural, call us at (833) 842-1866 and we’ll tell you honestly which one it is.
FAQs

Fifteen to twenty-five years is a realistic range when the original install was done correctly, and closer to ten to fifteen when the membrane was compromised from the start. Santa Rosa humidity and the wet season put steady pressure on a shower that can’t dry out between uses. If your bathroom is in that second range, have it looked at. Call (833) 842-1866 for a free estimate.
Often yes, if the problem is a cartridge, a drain seal, or a caulk and grout failure. If the backer board or pan liner is compromised, a repair is a patch over a problem that returns. We’ll open the wall, show you the condition with photos, and quote both paths so you decide with evidence. Estimates are free.
A cartridge or valve trim swap is a couple of hours; a shower replacement is typically two to four days; a full bathroom remodel runs two to four weeks depending on tile and cabinet lead times. We give you a written schedule with the written price. Call (833) 842-1866 and we’ll walk you through it.
We identify the valve body or pan from the stamping and measurements, not the handle code, then source the OEM part or a quality aftermarket equivalent and show you which we’re using and why. We don’t carry parts on a truck, so nothing is ordered until the photo record confirms the match. Call (833) 842-1866 for an exact quote; estimates are free.
Under the 365-Day Done Right Promise, if it isn’t done right we make it right – back by The Haven Standard, and by Clause 1: the price is written before anyone starts. Call Rowan Construction Group Santa Rosa at (833) 842-1866 for your free estimate. Our technicians have up to 19 years of experience, every crew is background-checked and comes with a documented photo record on every visit.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












