







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Kitchen Remodeling: The Santa Rosa Owner’s Guide
We install CWS-compatible kitchen remodeling in Santa Rosa at $14,000 to $45,000 for a full kitchen, with cabinet installation alone running $4,000 to $13,000 and countertops $2,000 to $6,500. Rowan Construction Group Santa Rosa works from a written price and a written scope before anything gets touched, and we’re an independent contractor, not affiliated with CWS. Owners usually learn something has failed the same way: a door stops closing square, a drawer glides rough and then won’t glide at all, or a counter seam opens a hairline gap that catches a fingernail. By the time you notice, the part has usually been going for months.
Which CWS Models This Applies To

CWS cabinetry and casework isn’t a single line, and the part that fits one series won’t fit another. Door and drawer hardware varies by hinge platform, drawer glide series, and box depth, so the first step is identification, not ordering. Look for the cabinet’s label inside the door or on the back panel; measure the door height, width, and hinge bore, and measure drawer box depth rather than the drawer face. Three measurements in inches, taken with a tape and written down, settle most fit questions before anyone lifts a phone.
For Santa Rosa kitchens in the 1930s to 1960s housing stock off Montgomery Drive and near Cherry Street, we routinely find CWS boxes set into walls that aren’t plumb or square, and a replacement part sized to the spec sheet can bind in a way the old one didn’t. On the OEM-versus-aftermarket call: OEM hardware matches the original bore pattern and finish, while quality aftermarket glides and hinges from established manufacturers can outlast the original at a lower price. We’ll tell you which way the numbers point for your specific CWS model, in writing. KraftMaid, Cambria and Silestone also come up often on these jobs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CWS Kitchen Remodeling Is Failing
- Doors that won’t stay closed or won’t sit flush. The hinge has lost tension or the mounting plate has pulled from the box. In a Santa Rosa kitchen with a run of cabinets near the range, heat cycling speeds this up.
- Drawers that grind, tip, or drop on one side. The glide has worn through its bearing surface or the rear socket has cracked. Under-filled drawers hide it for a while; a load of cast iron reveals it fast.
- Hairline gaps at counter seams or a backsplash pulling away. Movement in the substrate, not the countertop itself. Worth looking at before a small gap becomes a cracked seam.
- Soft or swollen cabinet box edges near the sink and dishwasher. Moisture wicking into the box material. Santa Rosa’s wet winters and the humidity a dishwasher throws off drive this more than most owners expect.
- Finish checking, peeling, or bubbling on door faces. A failing finish, not a failed structure. Sometimes a refinish is the honest answer and sometimes it isn’t.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Santa Rosa, a full kitchen remodel runs $14,000 to $45,000, a small kitchen remodel $9,000 to $20,000, cabinet installation $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash installation $800 to $2,500, and a kitchen island $3,000 to $10,000. What moves the number: cabinet box condition, whether the layout changes, counter material, and how much plumbing and electrical has to move. Every quote is a flat price with a written scope, so parts and labor are itemized, not bundled into a vague day rate. No work proceeds on a change until the change order is signed, and the 365-Day Done Right Promise covers the workmanship. Bring a competitor’s written estimate and we’ll review it line by line at no charge.
DIY or Call Us?
An owner can safely check hinge and glide fit, tighten visible screws, and confirm the cabinet label and measurements. Where DIY goes wrong: forcing a drawer glide into a box that’s out of square, drilling new hinge bores without accounting for the door’s existing pattern, and pulling a counter or backsplash to chase a seam gap that was never the actual problem. Kitchens also hide live wiring behind backsplashes and under cabinet runs, and a remodel that touches that wiring isn’t a homeowner job. We carry background-checked, uniformed technicians, our crews have up to 19 years of experience, and a live person answers the phone 24/7. Call (833) 842-1866 for a free estimate.
FAQs

Expect 10 to 15 years from glides and hinges in a working kitchen, and 20-plus from a well-built cabinet box that stays dry. Santa Rosa’s wet winters shorten the life of anything near the sink, dishwasher, or an exterior wall, so box edges are the first place to check. Call (833) 842-1866 for an exact quote – estimates are free.
Sometimes, yes. Loose hinges, worn glides, and a dropped drawer often fix with hardware alone rather than new cabinetry, and we’ll tell you when that’s the case instead of selling a remodel you don’t need. Cracked box material or a failed counter seam generally argues for replacement. Call (833) 842-1866 for a free second opinion.
A hardware-only fix is usually a single visit, while cabinet installation runs several days and a full kitchen remodel runs weeks depending on scope. We give you the timeline in the written quote before work starts, so there’s no guesswork mid-job. Call (833) 842-1866 to schedule your free estimate.
We identify the cabinet by its label and by measuring the door, hinge bore, and drawer box, then match OEM or a quality aftermarket equivalent to your CWS series. We don’t claim to stock parts or carry them on a truck; we source to the confirmed spec and show you the documented photo record of what was found and what was installed. Call (833) 842-1866 for an exact quote.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












