A Rowan company - serving Santa Rosa, CA
A living room with a wall of new windows and a sliding glass door
CGI · Santa Rosa

CGI Fence Installation in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A new bay window with a cushioned seat
A new casement window over a kitchen sink
A new white vinyl privacy fence with a double gate
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
A remodeled kitchen with a waterfall island and wood cabinets
A wood double vanity with two mirrors after a bathroom remodel
A finished backyard cottage with a small covered porch
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Fence Installation: The Santa Rosa Owner’s Guide

Fence installation from a CGI product starts with a question we can answer in one line: what is the actual condition of what’s standing now, and what does a like-for-like replacement cost? For Santa Rosa homeowners we quote $3500 – $9000 for fence installation, flat and in writing before anyone picks up a tool. That number moves up or down on run length, panel style, gate count and how much demolition the old fence needs. We are not affiliated with CGI; we’re an independent contractor that works with CGI materials and the CGI-series specs behind them.

Call (833) 842-1866

Owners usually arrive at this page the same way. A winter storm knocked three panels loose, a post started leaning toward the neighbor’s side, or a gate that used to swing freely now drags on the concrete. Sometimes it’s quieter: the boards look fine but the bottom rail is soft when you press it, or the whole run hums in a gust. All of those are signs the fence has reached the end of what patching can hold.

Key takeaways

  • CGI fence installation in Santa Rosa typically runs $3500 – $9000 installed, quoted flat before work begins.
  • Post footing condition decides the price more than the panel style does.
  • We measure the existing run and photograph the footings before we quote, so the number holds.
  • Under Clause 1 of the Haven Standard, no work starts without a written price and a written scope.

Which CGI Models This Applies To

New double-hung windows in a dining room

CGI fence systems are specified by run length, panel height and post spacing, and the model line on your original paperwork tells us which combination you have. The spec that matters most is post spacing and embedment depth, because that’s what governs whether an existing run can take a new panel or has to be rebuilt post by post. If you don’t have the paperwork, look for the manufacturer label stapled to the back rail or printed on the post cap, and measure the on-center distance between posts. Standard residential runs sit in a narrow band, but the variance between a 6-foot privacy panel and a shorter picket run changes the labor more than it changes the material cost.

The OEM-versus-aftermarket question for CGI is straightforward. Official CGI components match the original fasteners and rail profiles exactly, which keeps the warranty intact and makes the fit predictable. Quality aftermarket equivalents cost less and often perform the same, but the rail gauge and the screw patterns have to be checked against your existing posts or you’ll be re-drilling a hole that should have lined up. We document which route we’re recommending and why, in writing, before you decide. We also work with KraftMaid, Cambria and Silestone on interior finishes, so this same written-spec discipline shows up on every trade.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Fence Installation Is Failing

Here’s what we find when we walk a failing run in Santa Rosa, and what each symptom actually means underneath.

  • Leaning posts. The concrete footing has cracked or the soil has shifted around it. A leaning post is a footing problem, not a board problem, and patching the panel won’t stop the lean.
  • Soft or spongy bottom rails. Water has been sitting at the base of the panel and the rail has started to rot or delaminate. Press the rail with your thumb near the ground; if it gives, the moisture has been there a while.
  • Loose fasteners and rattling panels. Screws have backed out of the rail, or the holes were drilled oversize and have wallowed out. In a wind gust the whole run will hum or clatter.
  • Gates that drag or won’t latch. The gate post has moved out of plumb. A dragging gate is usually the first visible sign that a post footing has shifted.
  • Visible sag between posts. The top rail is undersized for the span or a support has failed. You’ll see the dip in the daylight line above the panels.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installers setting a new window and checking it for level

Fence installation in Santa Rosa runs $3500 – $9000 for a typical residential project. The range is driven by run length, panel style and height, gate count, and, most of all, how much of the old fence has to come out. A run where the footings can be reused costs materially less than a full rebuild, and we tell you which one you’re getting before you commit.

Line item What drives it
Demolition and haul-off Run length, how much concrete has to break out
Panel material Style, height, whether OEM or quality aftermarket
Post setting Count, footing depth, soil condition
Labor Access, terrain, gate count
Gate hardware Number of gates, hinge and latch spec

Every quote is a flat written price with a written scope and a written warranty, and there are no change orders without your signature. The work carries our 365-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

There’s a reasonable line between what you can check yourself and what you shouldn’t take on. You can walk the run, test the rails with your thumb, check post plumb with a level, inspect the fasteners, and photograph everything. That’s a useful survey, and it’s what we do first.

What you shouldn’t do is pull and reset a footing, rebuild a post in load-bearing soil, or run heavy panel and gate hardware overhead, especially on a slope. Fence posts are heavy, the footings are set in concrete, and a panel that comes down wrong can land on a person or a neighbor’s property. Digging out a footing near a property line also touches California setback rules, and the wrong placement becomes a neighbor dispute. We handle the plan, the placement, and the heavy lifting. Call (833) 842-1866 and we’ll schedule the site check and get a written price to you.

FAQs

A remodeled primary bathroom with a soaking tub and walk-in shower

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new concrete driveway with a paver borderA stone counter, tile backsplash and open shelf after a kitchen remodelA single-story rear room addition with tall windows and a new patioA new clay tile roofA new front yard fence with a matching gateA new paver pool deck

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch