







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Bathroom Remodeling: The Santa Rosa Owner’s Guide
Bathroom remodeling in Santa Rosa that we install and finish runs $9,000 – $28,000 for a full bathroom, and small bathrooms come in at $5,000 – $12,000. Before you commit to that number, a word on what this page actually is: we’re an independent Santa Rosa construction contractor that works on bathrooms, and we also handle the fixtures and finishes from brands like CGI when a homeowner is researching them. We’re not CGI, not affiliated with CGI, and we don’t speak for the brand.
What you’re probably facing is a bathroom where the finish has given out. The caulk line at the shower base has gone black and soft. The tile over the tub cracked along the seam, and when you pressed on it, the wall behind it felt hollow. Or the toilet rocks when you sit on it, which means the flange underneath is broken or the subfloor has been wet long enough to swell. These are the three we see most in Santa Rosa homes built between 1950 and 1985, and each one points to water that found its way behind a surface that was supposed to stop it.
Key Takeaways
- Full bathroom remodel in Santa Rosa: $9,000 – $28,000 installed; small bathroom: $5,000 – $12,000.
- Most “failed” bathroom parts in Santa Rosa trace to water intrusion at the shower pan, tile membrane, or toilet flange, not to the fixture itself.
- We’re an independent contractor. We work on bathrooms; we don’t manufacture or represent CGI.
- Every job gets a flat written price before work starts, a documented photo record, and the 365-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Which CGI Models This Applies To
The reader who lands here usually has a specific product in mind: a CGI vanity, a CGI shower surround or pan, a CGI toilet, or a CGI faucet and trim package. Because we’re an independent contractor and not a CGI dealer, the practical work is matching your existing model to a replacement or a full remodel scope, and the way we do that is by reading the label, not guessing from a photo.
Most CGI bathroom products carry a model or series number on a label under the vanity top, on the back of the toilet tank lid, on the underside of the sink bowl, or stamped on the shower pan’s drain flange area. Photograph that label before you do anything else. Series numbers tell us the rough-in dimension (the distance from the finished wall to the center of the drain, or the toilet’s rough-in, usually 12 inches but sometimes 10 or 14 in older Santa Rosa homes), and a rough-in that doesn’t match is the number-one reason a replacement doesn’t sit flush or a new toilet leaks at the base. On the OEM-versus-aftermarket question: for anything structural like a toilet flange or shower drain assembly, we recommend the OEM-spec part; for a faucet cartridge or a trim piece, a quality aftermarket equivalent from a brand we source (KraftMaid for cabinetry, Cambria and Silestone for counters) often costs less and performs identically. We don’t stock parts and we don’t carry them on a truck, so we order to your model number and schedule the install around the delivery.
Signs Your CGI Bathroom Remodeling Is Failing
Five symptoms we see again and again in Santa Rosa bathrooms, and the cause under each:
- Cracked or loose tile at the shower or tub seam. The thin-set under the tile has lost its bond, usually because the waterproofing membrane behind it failed and let moisture through. Once the membrane is compromised, the tile is cosmetic and the wall behind it is the real problem.
- A soft or spongy floor near the toilet or shower. Water has reached the subfloor and the wood has begun to delaminate. In older Santa Rosa homes with plywood or even plank subfloor, this can spread under the finished floor faster than it looks from above.
- Recurring mold or a musty smell that returns after cleaning. The moisture source is ongoing, typically a failed shower pan liner or a gap at the drain flange. Cleaning the surface treats the symptom and the growth comes back within weeks.
- A rocking toilet or water staining at the base. The flange is cracked, the wax seal has failed, or the floor beneath has swollen. Left alone, this is one of the most common causes of subfloor rot in a bathroom.
- Peeling paint, bubbling drywall, or a soft baseboard on the wall opposite the shower. Water is traveling through the wall cavity. The finish looks fine inside the shower because the water is leaving, not pooling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Santa Rosa, our bathroom remodeling ranges are:
- Full bathroom remodel: $9,000 – $28,000
- Small bathroom remodel: $5,000 – $12,000
- Walk-in shower installation: $4,500 – $12,000
- Tub-to-shower conversion: $3,500 – $10,000
- Shower replacement: $3,000 – $8,500
- Bathroom vanity installation: $800 – $3,000
What drives the range: whether the substrate under the tile is sound (if it isn’t, removing and replacing it adds square footage of labor), whether the plumbing rough-in needs to move, the size and finish of the tile, and whether you’re keeping the existing tub or converting to a walk-in shower. Every quote is a flat written price with a written scope and a written warranty, broken out line by line so you can see parts and labor separately. If the substrate turns out worse than the photos showed, we stop, and no work proceeds on that change until a signed change order is in place. The work is covered by the 365-Day Done Right Promise: if it isn’t done right, we make it right, backed by The Haven Standard and its terms page, not a verbal promise.
DIY or Call Us?
There’s a short list of things a homeowner can safely check: photograph the model label, confirm the toilet rough-in with a tape measure, test the shower pan for soft spots with a press of the thumb, and inspect under the sink for staining or soft cabinet floor. That’s diagnosis, and it’s useful. What we don’t recommend is tearing into a failed shower pan, cutting out a cracked toilet flange, or re-tiling over a suspect membrane, because the real work is behind the surface and remaking it wrong is how a $5,000 repair becomes a $12,000 one. Call (833) 842-1866 and we’ll bring a written price and a scope you can compare at no charge. If you already have a quote from another contractor, we’ll review it line by line as a free second opinion.
FAQs
How long does a CGI bathroom product last in a Santa Rosa bathroom? A well-installed shower pan liner or tile membrane typically lasts 20 to 30 years, while caulk and grout at the wet seams need attention every 3 to 5 years. Santa Rosa’s wet winters and seasonal humidity cycles age a bathroom faster than a dry climate will, so the maintenance interval matters more here than the product’s rated lifespan. Call (833) 842-1866 for a free estimate if you’re past that interval.
Can the bathroom be repaired instead of fully remodeled? Often yes, if the damage is limited to a fixture, a failed wax seal, or a single area of tile. It becomes a remodel when the substrate or the waterproofing membrane is compromised, because patching over a wet wall just hides the problem. We’ll tell you which situation you’re in after we’ve looked, and the written price reflects the smaller repair if that’s the honest answer.
How long does a bathroom remodel take in Santa Rosa? A small bathroom remodel typically runs 1 to 2 weeks on site, and a full bathroom runs 2 to 4 weeks, depending on tile and material lead times. Because we order to your model rather than carrying stock, delivery timing is part of the schedule we give you up front. Call (833) 842-1866 to get a written timeline with your quote.
How do you source the replacement parts? By model number and label photo, ordered to your specification rather than pulled from a truck. We work across more than fifty vetted material brands, including KraftMaid, Cambria, and Silestone for the cabinetry and surface side of a bathroom, and we’ll name the exact part and spec in the written quote. Call (833) 842-1866 and we’ll start with a free estimate.
Get a Written Price on Your Santa Rosa Bathroom

Under Clause 1 of The Haven Standard, you get a written price before anyone picks up a tool, every time. That’s why we founded Rowan Construction Group in 2007 and why it’s the discipline behind more than 4,000 projects delivered. Our technicians have up to 19 years of experience, they’re background-checked and uniformed, and every visit includes a documented photo record of what we found and what we did, included as standard. Call (833) 842-1866 to schedule your free estimate for your Santa Rosa bathroom.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












