







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Driveway & Pavers: The Santa Rosa Owner’s Guide
We install, repair, and replace PGT-compatible driveway and paver assemblies across Santa Rosa, and most full paver driveway installations here land between $7,000 and $18,000 depending on square footage, base prep, and paver selection. A single failed section, sunken run, or lifting edge is usually a smaller repair, and we quote it as a flat written price before anyone touches the ground. Rowan Construction Group Santa Rosa is an independent contractor and is not affiliated with PGT.
Owners in Santa Rosa usually find the problem the same way: a paver course that rocks underfoot when they pull into the driveway, a joint that keeps washing out after every winter rain, or a hairline crack in a PGT concrete paver that spreads through a full season. By the time the failure is visible at the surface, the base underneath has usually been moving for a year or more. Our technicians have up to 19 years of experience reading that pattern, and we tell you plainly what we found.
Which PGT Models This Applies To

PGT paver systems show up on Santa Rosa properties in two common forms: interlocking concrete paver driveways (the segmented blocks laid in a pattern) and PGT-permeability-rated pavers used where a lot drains toward the street or a shared swale. The two take different base specs, different joint sand, and different edge restraint, and mixing them is the most common compatibility mistake we correct. If you are matching a damaged paver, the identification comes off the unit itself: thickness (generally 2 3/8 inches for standard driveway pavers, thicker for commercial-rated), the chamfer profile, and the color and finish code on the original delivery paperwork or a stamp on the block.
For PGT specifically, the OEM-vs-aftermarket decision turns on one thing – whether the original color and profile is still in production. If it is, we source the matching unit. If it is a discontinued color, a close aftermarket equivalent from a vetted paver line is the honest answer, and we tell you upfront which pieces will read as a repair to a careful eye. We do not claim to stock PGT parts or carry inventory on a truck; every paver is sourced to your job. For interior projects, we also work with KraftMaid, Cambria, and Silestone, but on this page the focus stays on the driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Driveway & Pavers Is Failing
- Paver rocking or “tapping” underfoot. The base course has lost compaction, usually from water intrusion at a low corner. A single rocking paver means the bed under it has failed, and ignoring it spreads the movement to its neighbors.
- Joint sand washing out every rainy season. Santa Rosa’s wet winters strip joint sand from pavers that lack proper edge restraint. If the sand keeps disappearing, the restraint – not the sand – is the problem.
- Sunken or heaved sections after a wet winter. Soil movement and freeze-thaw at the perimeter. A localized dip is a base failure; a lifted ridge is usually root or drainage pressure underneath.
- Efflorescence – the white chalky film. Mineral salts drawn to the surface through moisture in the base. It signals ongoing water movement, not just a cosmetic stain, and often returns if the drainage is not corrected.
- Edge dropping off at the driveway apron. The transition where the paver field meets the concrete apron or gutter loses support first. This is where most Santa Rosa driveway paver failures start.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A full PGT-compatible paver driveway installation in Santa Rosa runs $7,000 – $18,000. A sectional repair or replacement of a failed run is quoted lower based on square footage, and driveway replacement as a whole – pulling the old field and re-laying – sits at $5,000 – $14,000. Resealing and re-sanding, when the pavers are sound, is $250 – $700.
What drives the range: square footage, base depth and compaction (the honest cost most cheap quotes skip), edge restraint, joint sand type, and paver selection. The written quote is a flat price with a written scope and a written warranty. Each line item names parts and labor separately. Under Clause 1 of the Haven Standard, the price is written before any work starts. The 365-Day Done Right Promise covers the work: if it is not done right, we make it right.
DIY or Call Us?
A homeowner can safely do three things: sweep loose joint sand back into open joints, rinse efflorescence with a diluted white vinegar solution to confirm it returns, and photograph any rocking or sunken section with a straightedge laid across it so the movement is measured rather than guessed. What goes wrong with DIY is the base. Re-bedding a paver on loose sand without fixing compaction and drainage looks right for one season and fails the next – and in Santa Rosa’s clay-heavy soils, that failure is predictable, not accidental.
Paver work itself is not dangerous the way tensioned garage-door springs or gas lines are, but base failure and improper edge restraint cause the expensive repeat repair. If a section is moving, call us rather than reset it by hand. Call (833) 842-1866 for a free estimate – we’ll measure the failure, tell you what we found, and put the price in writing.
FAQs

A properly installed PGT paver driveway typically lasts 25 to 30 years or more in Santa Rosa’s climate, with the base and edge restraint – not the paver – usually determining the lifespan. Joint sand needs replenishing every two to three years, and resealing every few years helps in the wet-season months. Call (833) 842-1866 for an exact quote on your driveway; estimates are free.
Yes – often only the failed run needs replacement, not the full driveway, provided the surrounding pavers are sound and the base failure is localized. A sectional repair is quoted far lower than a full installation. Call (833) 842-1866 and we’ll assess whether a repair or a full replacement is the honest recommendation.
A localized paver repair usually takes a day; a full paver driveway installation in Santa Rosa typically runs three to six working days depending on square footage and base work. The written scope states the timeline up front. Call (833) 842-1866 for a written estimate with the schedule spelled out.
We source PGT-compatible pavers to the job after identifying the existing unit’s thickness, chamfer profile, and color code, then matching it to the closest available production line – OEM where it’s still made, a vetted aftermarket equivalent where it’s discontinued. We’re upfront about any color that won’t match perfectly. Call (833) 842-1866 to schedule a free estimate.
Whether it’s a single rocking paver or a full driveway re-lay, the next step is a written price – not a phone promise. Call Rowan Construction Group Santa Rosa at (833) 842-1866 to schedule your free estimate. Crews are background-checked and uniformed, calls are answered by a live person around the clock, and every visit includes a documented photo record so you have evidence of what was found and what was done. Bring a competitor’s written estimate and we’ll review it line by line at no charge with our Free Second Opinion.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












