







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Roofing in Santa Rosa, CA
PGT Roofing: The Santa Rosa Owner’s Guide
PGT roof components are not a single part you swap like a shingle. PGT builds impact-rated window and door systems, and the “PGT roofing” most Santa Rosa homeowners ask about is the flashing, sill pan, and water-barrier detailing where PGT frames meet the roof. When that interface fails, you get a leak around a window or door frame, not across the field of the roof. Installed repair work in Santa Rosa runs $400 – $1,800 for a targeted flashing or sill-pan fix, while a full roof replacement is $8,000 – $20,000. We install and service PGT-compatible roofing detailing across Sonoma County.
Owners usually find the problem after a hard rain. A brown ring spreads on the ceiling near a window, or the stucco below a sliding door shows a soft spot. Sometimes a contractor points at the roof when the real failure is the sill pan under a PGT door. That distinction decides whether you pay for a flashing repair or a full re-roof, and getting it wrong is the most expensive mistake on this page.
Which PGT Models This Applies To

PGT impact products carry their model information on a label inside the frame jamb, typically a sticker with the series name, size, and a glass or performance code. Find that label before you call anyone. It tells us whether your unit is a vinyl impact window, a sliding glass door, or a fixed picture unit, and each one meets the roof with different trim and flashing geometry. A horizontal slider needs a continuous sill pan with back dam; a fixed unit over a shed roof needs head flashing tied into the wall barrier.
Compatibility gotchas worth knowing. PGT frame profiles changed across series, so a sill pan sized for one series will not seat correctly on another; measure the rough opening at the frame, not the glass. Second, impact-rated units are heavier and often set deeper in the wall, so the flashing height above the roof deck is shorter than a standard window. That inch-and-a-half matters. For the OEM-versus-aftermarket call, we use PGT-compatible flashing details where the profile demands it and standard code-compliant membrane and metal flashing where it performs the same job. Rowan Construction Group Santa Rosa is an independent service provider and is not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Roofing Is Failing
Five symptoms we see on Santa Rosa homes, each with what is actually going wrong:
- Staining on the ceiling below a window or door frame. Water is getting past the head flashing or the sealant line above the PGT unit and tracking down the framing. The stain shows up inside before the exterior looks damaged.
- Soft or bubbling stucco below a sliding door. The sill pan is either missing, under-sized, or was never back-dammed, so water sits in the pan instead of draining out the weep path. Common on 1990s and 2000s builds around Bennett Valley.
- Daylight or a draft at the frame-to-wall joint. The integration flashing has separated or the sealant has dried and cracked. In Santa Rosa’s dry summers that sealant can fail in two or three seasons, and the first fall rain finds it.
- Lifted or curled metal flashing at the roof-wall junction. Fasteners have backed out or the step flashing was lapped in the wrong direction. Water then runs behind the metal instead of over it.
- Moss or dark streaking concentrated along one roof plane near a PGT frame. A persistent wet zone means the water barrier is compromised there. North-facing planes in Santa Rosa stay damp through the foggy months, which speeds the failure.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Targeted flashing or sill-pan repair around a PGT window or door typically runs $400 – $1,800 installed in Santa Rosa, with the upper end covering a full sill-pan rebuild on a sliding door. Tile roof repair sits at $600 – $2,500 where the PGT junction meets tile and the underlayment must be re-laid. Full roof replacement, when the barrier is gone across the whole plane, is $8,000 – $20,000.
What moves the number: how much wall and roof has to be opened to reach the failed barrier, whether the flashing is metal or membrane, and how the PGT frame is trimmed where it meets the roof. Parts are quoted separately from labor so you can see both. Under Clause 1 of The Haven Standard, the flat written price and written scope come before anyone starts, and no change proceeds without a signed change order. The work carries the 365-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things. Look for the PGT label, photograph the staining, and confirm where the water enters during a rain. What we do not recommend is opening flashing on a roof deck yourself. Getting up on a wet slope to pry metal flashing is how falls happen, and re-lapping it wrong sends water behind the barrier, which turns a $400 repair into a $20,000 re-roof. The sill-pan and integration work needs to be tied into the wall barrier correctly, and that is a trained hand’s job. Call (833) 842-1866 and we will look at what you found and quote a flat written price.
FAQs

Properly installed flashing and water barrier around a PGT frame last 15 to 25 years, but the sealant line above the unit often fails in 2 to 3 years in Santa Rosa’s dry summers and foggy winters. The barrier lasts; the sealant is the part that needs periodic attention. Call (833) 842-1866 for a free quote on resealing or rebuilding the junction.
Usually yes. If the leak is localized to the PGT frame junction and the rest of the roof barrier is intact, a targeted flashing or sill-pan repair is the right call and runs $400 – $1,800. A full replacement only makes sense when the barrier is gone across the whole plane. Call (833) 842-1866 and we will tell you which one you have, in writing.
A targeted flashing or sill-pan repair is typically a one-day job; a full roof replacement is 2 to 4 days depending on size and weather. We schedule around dry windows, which matters in Santa Rosa’s wet season. Call (833) 842-1866 to get a written timeline with your quote.
We match the PGT-compatible flashing and membrane to your frame profile by measuring the rough opening and reading the jamb label, not by guessing from a photo. Where the profile demands PGT-compatible detail we use it; where a standard code-compliant part does the same job we say so. We also service KraftMaid, Cambria, and Silestone products across other trades. Call (833) 842-1866 for a free estimate.
Ready for a written price before any work starts? Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate and a free second opinion on any written roof quote you already have. You get a flat price, a written scope, a documented photo record of what we found, and the 365-Day Done Right Promise behind the work.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












