







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Santa Rosa Owner’s Guide
We install PGT-compatible kitchen remodeling in Santa Rosa, and the installed cost typically runs $14,000 – $45,000 for a full kitchen, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Because this is planned construction and not an emergency repair, we schedule the work rather than promise a same-day visit: you’ll get a written flat price and written scope before the first tool comes out. Most Santa Rosa owners discover a PGT component problem the same way – a cabinet door that no longer seals against the frame, a drawer that drags near the end of its travel, or a slide that leaves a metal shaving on the shelf. A written price is the starting point, so the surprise never lands after the boxes are open.
Which PGT Models This Applies To
PGT builds window and door products across several lines, and its kitchen and cabinetry hardware is tied to specific series rather than being universal. The part that matters most is the model identification label: on windows it sits in the jamb channel or behind the sash, and on doors it’s on the hinge stile. Photograph that label before you order anything. A part listed as fitting “most PGT” usually means it fits the most common series, not yours, and the gap between a 1-1/2 inch and a 2-1/4 inch component is the difference between a slide that seats and one that binds. Once we have the label, we match the OEM part number against the aftermarket equivalent and tell you in writing which we recommend and why. Independent aftermarket equivalents for standard PGT series are often functionally identical for half the price; for older or discontinued series, OEM sourcing is usually the only honest answer. We’re an independent service provider in Santa Rosa and not affiliated with PGT.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
The symptom tells you which part has worn. Here’s what we find most often in Santa Rosa kitchens:
- Drawer slides that catch or scrape. The roller or ball bearing has worn flat, or the track is out of parallel. A dragging slide usually means the cabinet face is slightly racked, not that the slide itself is defective.
- Cabinet doors that won’t stay shut or sit crooked. Hinge screws have pulled from stripped pilot holes in the frame. It’s a fastener problem and a hinge adjustment at the same time, and the two get fixed together.
- Soft-close drawers that slam. The damping mechanism inside the slide has failed. The slide still carries weight; it just lost the slowing action, which is a separate internal component.
- Metal shavings or dark grit inside a drawer. The slide’s bearing track is grinding itself down. Left long enough, the track wears into the cabinet side and the repair grows from a part swap into a frame repair.
- Squeaking or popping under load. Loose mounting hardware or a slide that’s pulling away from the cabinet wall. On Santa Rosa’s older housing stock, this often traces to seasonal wood movement that loosened the fasteners over several dry summers.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Santa Rosa for the kitchen scope this work sits inside:
| Scope | Installed Price Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet count and box quality, whether the countertop needs a templated edge profile, and whether your existing plumbing or electric has to move. The written quote separates parts and labor line by line, so the hardware cost is visible instead of buried. Under Clause 1 of the Haven Standard, the price is written before anyone starts, and no change proceeds without a signed change order. Every job carries the 365-Day Done Right Promise and a documented photo record on every visit.
DIY or Call Us?
You can safely check a few things yourself. Open and close each drawer and note where it catches. Photograph the PGT model label. Tighten a visibly loose hinge screw with a hand driver and see if it holds. What goes wrong is the next step: over-torquing a screw strips the frame, and forcing a misaligned slide seats the track wrong so the next drawer fails too. Because kitchen cabinets and counters carry weight and, in the case of anything near a gas line or an outlet, real exposure, save the load-bearing and electrical work for a trained professional. We’ll tell you plainly which parts are a five-minute swap and which need a crew. Call (833) 842-1866 for a free estimate, and bring a competitor’s quote if you have one.
FAQs

Quality PGT-compatible slides and hinges typically run 10 – 15 years of daily use, and soft-close dampers usually fail first, around year 7 to 10. In Santa Rosa’s dry summers and cool wet winters, the wood movement puts extra stress on fasteners, so hinge screws tend to loosen before the metal itself wears out.
Often yes. A loose hinge can be re-anchored, and a misaligned drawer slide can be adjusted rather than swapped. We inspect first and quote the smallest honest fix; if a repair would only buy another season, we’ll say so and show you the wear in the photo record.
A single drawer slide or hinge swap is typically under an hour. Replacing hardware across a full cabinet run usually takes half a day, and we schedule it around your kitchen being usable rather than shutting the room down for a week.
We match your model label to the OEM number, then price it against the vetted aftermarket equivalent. Our sourcing depth across fifty-plus brands – including KraftMaid, Cambria, and Silestone for the cabinet and counter scope – is what lets us quote honest numbers instead of inflated ones. Call (833) 842-1866 for an exact quote; estimates are free.
When you’re ready to stop guessing which part has failed, call Rowan Construction Group Santa Rosa at (833) 842-1866 to schedule your free estimate. You’ll get a written flat price, a written scope, and a straight answer on whether the fix is a part or a repair. Bring a competitor’s quote and we’ll review it line by line at no charge. Background-checked, uniformed technicians, a live person answering the phone around the clock, and a documented photo record on every visit come standard.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












