







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Windows & Doors: The Santa Rosa Owner’s Guide
Quick answer: We install and service Boral windows and doors for Santa Rosa homeowners, with full window replacement typically running $4,500-$15,000 and impact window installation at $8,000-$25,000 depending on the openings. Scheduling a free estimate takes one call, and most planned replacements are quoted in writing before any work begins. The failures we see most often in Santa Rosa homes start small: a door that stops latching closed, a window sash that drags in its track, or condensation trapped between panes. Owners usually notice the symptom weeks before they identify the part, because a Boral window or door tells you it’s wearing out through its hardware before the frame ever shows it.
This guide exists for the owner who already has a Boral product and a failing component. You’ll find model identification help, the symptoms worth acting on, honest installed pricing for Santa Rosa, and a straight answer on what you can check yourself versus what needs a technician. We’re Rowan Construction Group Santa Rosa, an independent service provider and not affiliated with Boral, and this is the Boral-specific reference we’d want a homeowner to read before calling anyone.
Key Takeaways
- Installed window replacement in Santa Rosa runs $4,500-$15,000; impact windows run $8,000-$25,000.
- Most Boral failures are hardware or seal failures, not the window or door body itself.
- Model labels are usually etched on the frame or printed on the glass spacer, and that label determines the part.
- Written price before any work starts, a signed change order for any change, and the 365-Day Done Right Promise on our work.
Which Boral Models This Applies To

Boral’s window and door line covers vinyl and aluminum units under several product families, and the part you need depends less on the brand than on the series name and the unit’s dimensions. The fastest identification step is to find the label. Look on the inside top and bottom edge of the sash, on the jamb between the frame and the sash, or on the glass spacer bar as a printed name in the corners. That label typically carries the manufacturer’s product line, the unit size, and sometimes a date code. If the label is worn off, a technician can measure the unit and the glass makeup instead.
Here’s where Boral gets particular: parts are matched by series and size, not by the general “Boral window” description, and two units that look identical from the street can carry different hardware depending on what year and series they were built under. A screen that fits one series often won’t fit the next. If you’re comparing OEM parts to a quality aftermarket equivalent, the aftermarket route works for some items (screens, weatherstripping, some rollers) and goes wrong for others (latch assemblies and balances, where the aftermarket’s dimensions can be close but not exact). When you’re matching against your Boral model, an OEM or explicitly sized equivalent is the safer call. If your project also involves KraftMaid cabinets, Cambria counters, or Silestone tops, we handle those brands the same way: by name, spec, and measurement.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Windows & Doors Is Failing
Windows and doors telegraph failure through their hardware and seals long before the frame gives out. Here are the five symptoms Santa Rosa homeowners report most, and what each one actually means.
- The door won’t latch or stay closed. Usually a worn strike plate, a bent latch, or a hinge that has dropped under the weight of the sash. A door that catches at the top corner has often shifted with the wall, not the part.
- A window sash drags in the track or won’t open smoothly. Worn sash balances or a failed tilt-latch mechanism. On vinyl units, a distorted sash due to heat or settling makes the balance work against friction.
- Condensation fogging the glass. The seal between the glass panes has failed and moisture has entered the sealed unit. The glass unit itself needs replacing, not just the frame.
- Steady drafts or visible light around the perimeter. Weatherstripping or the perimeter seal has shrunk or failed. Santa Rosa’s dry summers and wet winters cycle seals hard, and older units show it along the wet-facing sides first.
- Rot, soft wood, or crumbling caulk at the frame. Water intrusion at the perimeter. This is worth acting on early because a failed seal leads to frame damage and, in older homes, to the sill and casing around the opening.
In Santa Rosa’s climate, where the coastal fog rolls in and out with the seasons and the sun swings to full intensity in the afternoon, we see seal and finish failures on the west- and south-facing units first. North-facing units tend to show moisture-related failures along the trim before the glass ever fogs.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed prices for window and door work in Santa Rosa fall in a predictable band, and the range is driven by unit size, glass package, and the condition of the surrounding opening. Here’s the honest line-item picture.
| Work | Installed Price Range |
|---|---|
| Window replacement (standard, per opening through the project) | $4,500-$15,000 |
| Impact window installation | $8,000-$25,000 |
| Hardware and component repairs, typical | Quoted per unit, written before work |
What’s in that price: the unit, labor, perimeter sealing and caulking, the haul-away of old materials, and a written scope listing exact openings and unit sizes. The low end of the band is a smaller number of standard openings; the high end reflects more openings, larger units, impact-rated glass, or openings that need trim and substrate repair. Under The Haven Standard, the price is written before anyone starts (Clause 1), and no change proceeds until a signed change order is in hand. Our 365-Day Done Right Promise backs the work: if it isn’t done right, we make it right. A written warranty comes with every quote, not an asterisk.
DIY or Call Us?
Some checks are safe and even useful for you to do before we arrive. Run your hand around the door or window perimeter on a cold morning to feel for drafts. Open and close each unit and note where it drags. Look for fog between the panes, and check the visible caulk line for cracks. Photograph the label if you can find it. Those five things take twenty minutes and make the estimate faster and more accurate.
Where DIY goes wrong for this work isn’t the part swap itself, it’s the judgment call: deciding that a stubborn door needs a new latch when the frame has actually shifted, or swapping a glass unit without finding the seal failure that caused the fog in the first place. We’ve seen homeowners correctly buy the right part and then install it into an opening that needed realignment, and the new part fails the same way in a season. That’s the point where a technician’s eyes on the opening beat a parts order. Call (833) 842-1866 and we’ll get a written estimate on the books.
FAQs

Glass and frame construction on a well-installed Boral unit should last twenty to thirty years, but the movable parts – latches, balances, weatherstripping, and perimeter seals – often need attention in the ten to fifteen year range. Santa Rosa’s sun exposure shortens the seal life on west-facing units. Call (833) 842-1866 for an exact quote on your units; estimates are free.
Yes, more often than you’d expect. Latches, balances, weatherstripping, and screens can usually be replaced without touching the glass or frame, and we quote that repair before recommending a whole-unit swap. Glass that has fogged from a failed seal cannot be repaired; the glazing unit itself needs replacement. Call (833) 842-1866 to find out which side of that line your window falls on – estimates are free.
A single hardware or component repair is usually an hour or two, while a full unit replacement runs a half day to a full day per opening depending on size and trim. Multi-unit projects get a written schedule in the scope so you know exactly what happens each day. Call (833) 842-1866 for a free estimate and a written timeline.
We work from the unit label, series name, and measured dimensions, then source through our network of more than fifty vetted brands and suppliers to match the part to the actual product. If the exact OEM part is no longer produced, we identify a dimensionally equivalent part and confirm the fit before ordering. Call (833) 842-1866 to get the sourcing started on your specific Boral model.
If your Boral window or door is giving you trouble, get the numbers first. Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate on the repair or replacement, and we’ll confirm the model, quote a written price before any work starts, and hand you a documented photo record of what we found when we’re done. Every project gets the same treatment: a flat written price, a written scope, a signed change order for any change, and the 365-Day Done Right Promise behind the work.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












