A Rowan company - serving Santa Rosa, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Owens Corning · Santa Rosa

Owens Corning Bathroom Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Bathroom Remodeling: The Santa Rosa Owner’s Guide

We install Owens Corning-compatible bathroom remodels across Santa Rosa, and a full bathroom remodel here typically runs $9,000 to $28,000 installed, with a written flat price before any work starts. A small bathroom remodel lands between $5,000 and $12,000. Every job includes a written scope, honored change orders only when signed, and a documented photo record of what we found and what we did.

Call (833) 842-1866

Bathrooms fail in quieter ways than most parts. A homeowner in Santa Rosa’s McDonald Avenue corridor usually notices it first in the grout line near the floor: a hairline crack that keeps returning after resealing. Then the shower pan flexes underfoot, the caulk at the base pulls away within a season, and the vanity substrate feels soft when you press it. In an older bathroom, the source may be decades of slow moisture migration rather than one dramatic leak. In a newer one, it’s often a failed seal at the curb or a missing vapor barrier behind the tile. We’re an independent Santa Rosa service provider, not affiliated with Owens Corning, and we install to the manufacturer’s specifications while giving you the honest picture of what your bathroom actually needs.

Which Owens Corning Products This Applies To

A tile setter installing wall tile in a shower

Owens Corning is a materials brand, not a single part, so the “model” here is the product line specified in your bathroom build. The most common in Santa Rosa homes are the FOAMULAR NGX rigid foam insulation boards (the pink panels behind the wall, specified in thicknesses from 1/2 inch to 2 inches, with an R-value that changes with thickness), PINK Next Gen Fiberglas insulation for interior wet walls, and their underlayment and moisture-barrier accessories. Each has a facing, density, and thickness printed on the product face or the printed board edge; that’s the label to reach for before anything is ordered.

Identify the right replacement by pulling the spec sheet from the installed product or, where accessible, reading the stamp on the board face. For FOAMULAR, the compressive strength and R-value are printed directly on the panel. The OEM-versus-aftermarket decision matters here: an equivalent rigid foam from another manufacturer may have the same nominal R-value but a different facing and edge profile, which changes how it fits against studs and how seams are taped. We don’t carry parts on a truck or stock brand materials locally. We source to the spec your job requires, and we show you the product label before it goes in the wall. We also work with KraftMaid, Cambria, and Silestone on the fixture and surface side of the same bathroom.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Bathroom Remodeling Is Failing

  • Recurring grout cracks at floor and wall joints. Often movement from a subfloor that wasn’t properly isolated, or a rigid foam installation that left a thermal bridge. The crack keeps coming back because the movement is still there.
  • Soft or spongy spots in the wall behind tile. Moisture has reached the fiberglass or foam layer through a failed vapor barrier or a bad seal at a fixture penetration. By the time you feel it, the board behind may be saturated.
  • Caulk failure along the shower curb and tub deck within a year. The substrate wasn’t rigid, so the joint moves and the caulk fails before its service life. This is one of the most common calls we get in Santa Rosa.
  • Musty smell that returns after cleaning. Trapped moisture behind the tile or in the wall cavity, often from a vapor barrier installed on the wrong side of the assembly. Santa Rosa’s cool, damp winters make this worse in bathrooms with poor exhaust.
  • Visible mold or efflorescence on grout or caulk lines. A sign that the moisture balance in the assembly is wrong, not just that the surface needs scrubbing. It usually traces to a missing or compromised barrier behind the finish surface.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new casement window over a kitchen sink

A full bathroom remodel in Santa Rosa runs between $9,000 and $28,000 installed. A small bathroom remodel is $5,000 to $12,000. A walk-in shower installation runs $4,500 to $12,000, a tub-to-shower conversion is $3,500 to $10,000, and a shower replacement alone is $3,000 to $8,500. A bathroom vanity installation is $800 to $3,000.

What pushes a Santa Rosa job toward the top of the range: a full strip to studs with new insulation and vapor barrier, a curbless shower with linear drain, and a vanity with a stone top. What keeps it lower: a tub-to-shower conversion with the existing drain reused and the original wall assembly kept where it tests dry. The quote is a flat written price with a written scope before any work starts. Change orders require your signature before the work proceeds; that’s the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. Parts and labor are separated on the quote, and the 365-Day Done Right Promise is printed on every page and backed by a terms page, not an asterisk.

DIY or Call Us?

An owner can safely check surface conditions: press the wall behind tile for softness, look for recurring grout cracks, note whether caulk fails within a season, check the exhaust fan’s actual draw with a tissue at the grille. Those are observations, not fixes. Where DIY goes wrong is the wall assembly. Aesthetic regrouting over active moisture hides the problem for a season and lets it spread. Adding a second layer of caulk over a moving joint doesn’t stop the movement. And pulling a flanged fixture to inspect what’s behind it can open up a leak path that wasn’t active before. The dangerous part isn’t the tile saw; it’s the unseen assembly.

If you’ve resealed a joint twice in two years and it keeps opening, the joint is telling you the substrate is moving. Call (833) 842-1866 to schedule your free estimate. A live person answers, and the estimate is free with no obligation.

FAQs

A new white vinyl privacy fence with a double gate

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
An open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelightsA new black aluminum pool fence with a gateA new curved paver walkway to the front porch

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch