







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Kitchen Remodeling: The Santa Rosa Owner’s Guide
Owens Corning kitchen remodeling in Santa Rosa typically runs $14,000 to $45,000 installed, covering cabinetry, countertops, backsplash, island work and the labor and permits that go with it. We install Owens Corning-backed kitchen components and match them to the rest of your layout, with a written flat price before any work starts. Same-day service isn’t how a kitchen remodel works, but we can usually get out for a free estimate within a few days. Most Santa Rosa owners discover a failing kitchen when the cabinets start sticking, a countertop edge chips, or a backer board softens behind the tile. The symptom is always the same: something that used to sit flush no longer does.
Which Owens Corning Models This Applies To

Owens Corning doesn’t build kitchen cabinets or countertops the way it builds shingles and insulation. What it does supply in a residential kitchen is the material that lives behind the finished surfaces: faced insulation batts in the walls, foam sheathing under the exterior, and the underlayment and moisture-barrier products that sit between framing and drywall. So the “model” question in a Santa Rosa kitchen is usually about the insulation and sheathing product, not a cabinet line.
To identify what you have, look for the Owens Corning label on the facing of the batt in an open wall cavity, on the foam board behind the siding at an exposed corner, or on the roll of house wrap at the foundation line. The label carries an R-value (the resistance-to-heat-flow number) and a product code. Write both down before you call anyone.
The OEM-versus-aftermarket decision here is simpler than in most trades. Owens Corning insulation is a commodity spec: an R-13 batt from Owens Corning and an R-13 batt from another major mill perform the same function when installed to the same depth and friction-fit. What changes the outcome is the R-value the wall was designed for and whether the vapor barrier is on the right side for Santa Rosa’s climate. We’re an independent contractor and not affiliated with Owens Corning; we name the brand because the spec matters and our written quote should reflect it honestly.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Owens Corning Kitchen Remodeling Is Failing
- Cabinets that stick in summer and swing free in winter. Wood moves with humidity, and a kitchen wall that’s under-insulated or missing its vapor barrier swings harder than it should. When the door gap opens and closes by a quarter inch across the season, the wall assembly behind the cabinet is the first thing we inspect.
- A cold zone on the kitchen wall behind the range or sink. That’s almost always compressed or missing insulation where a plumber or electrician cut through the batt during an earlier remodel. The batt is still there in name; it just isn’t doing the R-value the label promises.
- Soft or crumbling drywall at the base of an exterior kitchen wall. Foam sheathing that was never taped, or house wrap that overlaps the wrong way, lets Santa Rosa’s winter rain wick into the framing. By the time the drywall softens you have a moisture problem, not a paint problem.
- Backsplash tile that pops off in sheets. Behind the tile is a backer board and, on exterior walls, the insulation system. If the wall moves or wicks, the thin-set bond fails and the tile lets go in whole courses rather than single pieces.
- A countertop that rocks on a level cabinet run. A counter that won’t sit flat usually means the cabinet boxes have shifted, and that traces back to a wall that’s moved. We check the wall before we reset the counter.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Owens Corning kitchen remodeling in Santa Rosa runs $14,000 to $45,000 for a full kitchen, and a small kitchen can land between $9,000 and $20,000 when the layout stays put. Broken out, cabinet installation is $4,000 to $13,000, countertop installation $2,000 to $6,500, backsplash $800 to $2,500, and a kitchen island $3,000 to $10,000 when you add one.
What drives the range: the size of the room, whether walls come open (which is when the insulation and sheathing get corrected), and the finish level of the cabinets and countertops. The price you get from us is flat and written, with a written scope and a written warranty before anyone picks up a tool. Under Clause 1 of the Haven Standard, the number is in your hands before work starts. No change proceeds until you’ve signed a change order, which is why our projects finish within a few percent of the agreed price. The work carries the 365-Day Done Right Promise: if it isn’t done right, we make it right.
DIY or Call Us?
What you can safely check yourself: the label on an exposed batt to record its R-value, the gap around a sticking cabinet door with a tape measure, and whether the house wrap at an exposed corner laps the right way. All of that is observation and costs nothing.
What we’d steer you away from: opening an exterior wall to re-insulate, re-taping foam sheathing, or pulling a backsplash to inspect the backer board. Those jobs mean working around live wiring and plumbing, and a mistake there is a water or fire problem, not a cosmetic one. Kitchen work is the least “same day” of the trades, so plan on scheduling a free estimate rather than an emergency. Bring a competitor’s written quote and we’ll review it line by line at no charge. Call (833) 842-1866 to schedule your free estimate.
FAQs

Twenty to thirty years or more when it stays dry, and far less when it doesn’t. In Santa Rosa, the failure mode is rarely the insulation itself: it’s moisture from a leak or a vapor barrier on the wrong side, which compresses the batt and drops its effective R-value. We inspect for water before recommending replacement. Call (833) 842-1866 for an exact quote; estimates are free.
Often, yes. A compressed batt behind a cabinet run, a cut around a plumbing line, or a single missing section can be patched or re-fit without redoing the room. Full replacement only makes sense when the sheathing or vapor barrier is also compromised. We tell you which case you’re in before the written price. Call (833) 842-1866 to schedule your free estimate.
A small kitchen runs two to three weeks of active work; a full remodel with cabinets and countertops runs four to eight weeks. The wall and insulation phase itself is a few days. The schedule is written into the scope, so you know what’s happening each week. Call (833) 842-1866 for an exact quote; estimates are free.
Through our vetted supplier network, at the R-value and spec the written scope calls for, and never from a truck that happened to have something close. We also work with KraftMaid, Cambria, and Silestone for the cabinet and countertop side of the job. The written quote lists each item so you can compare it. Call (833) 842-1866 to schedule your free estimate.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












