A Rowan company - serving Santa Rosa, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
CertainTeed · Santa Rosa

CertainTeed Bathroom Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
A new curved paver walkway to the front porch
A galley kitchen opened up to the dining room with a new peninsula
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CertainTeed Bathroom Remodeling: The Santa Rosa Owner’s Guide

We install and repair CertainTeed bathroom systems in Santa Rosa, and a full bathroom remodel typically runs $9,000 – $28,000 installed, depending on the tile, fixtures and waterproofing package you choose. Smaller scopes, like re-tiling a wet wall or resetting a shower pan, land well below that lead range. When a CertainTeed assembly starts to fail, Santa Rosa owners usually notice it the same way: a soft spot or dark bloom at the floor line of the shower, grout that keeps cracking in the same place after a re-grout, or a bubble in the paint on the wall behind the tile. The cause is almost always water behind the finish surface, not the surface itself. CertainTeed’s system products are sold through dealers and distributors, and pulling the right component begins with identifying the correct series before anyone swings a hammer.

Call (833) 842-1866

Which CertainTeed Models This Applies To

A tile setter installing wall tile in a shower

CertainTeed makes a broad line of building products, and the bathroom-relevant parts fall into a few families: backer board and tile underlayment, fiber cement board, and the mineral-fiber and gypsum panels that show up behind tile in wet areas. Matching the right part comes down to reading the printed label on the board or the original spec sheet. CertainTeed prints the series and thickness right on the panel face, and once you have that, you’re comparing apples to apples. This matters because a 1/2-inch board and a 5/8-inch board are not interchangeable on a shower wall; the extra thickness changes the fastener schedule and where the tile sits relative to the curb and trim. The thickness you choose also affects how the water-resistant membrane laps the pan, and a half-inch difference can throw that lap off enough to matter.

On the OEM-versus-aftermarket decision, the honest answer depends on the part. For structural backer board in a wet area, matching the original CertainTeed specification is not expensive and removes a compatibility question. For trim, sealants and generic fasteners, a quality equivalent from another brand will do fine because those parts aren’t proprietary to CertainTeed. We’re an independent contractor and not affiliated with CertainTeed, so we’ll tell you when a third-party part meets spec and when it doesn’t. We don’t stock any parts and nothing rides on a truck, so every component is sourced for your specific job once the scope is written.

Two specifics worth knowing before you buy anything: CertainTeed backer board is measured by nominal thickness (commonly 1/2 inch and 5/8 inch for wet walls), and the fastener pattern and joint treatment change with thickness, so a board that matches in name but not in thickness will fail the assembly. Also, on the separate brands we handle, KraftMaid, Cambria and Silestone show up often when a bathroom refresh includes cabinetry or a counter, and those are quoted on their own lines.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CertainTeed Bathroom Remodeling Is Failing

  • Cracking grout that returns after a repair. Usually movement or moisture in the substrate below the tile, not a grout problem, so re-grouting alone doesn’t hold. In Santa Rosa’s older homes, this often traces back to a substrate that was never built for a wet room. The grout is a symptom, and the substrate is the cause.
  • Soft or spongy floor near the shower or tub. A sign water has reached the subfloor and the board has lost its integrity. You can often feel it by pressing near the curb.
  • Dark staining or a musty smell at the base of a wall. Points to trapped moisture behind the tile where the board was never properly lapped to a waterproofing layer. The smell is the giveaway before any visible damage appears.
  • Loose or hollow-sounding tile. Means the bond has broken, usually from moisture or movement. Tap a few tiles near the wet wall and listen for the change in sound.
  • Bubbling paint on the adjacent room’s wall. The most reliable early warning. Moisture migrates through the wall and shows up on the other side, often in a closet or hallway.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

In Santa Rosa, a bathroom remodel that addresses a failed CertainTeed assembly runs $9,000 – $28,000 installed. The range is driven by how much of the wall and floor has to be opened up, whether the shower pan is rebuilt, the tile you choose, and fixture quality. A smaller refresh, say re-tiling a wet wall and resetting the pan, comes in lower, while a full gut with new waterproofing across the whole room is at the top. Every quote is a flat written price with a written scope before work starts; if a hidden condition turns up mid-job, nothing proceeds on that change until you’ve signed a written change order. That’s the discipline that keeps projects within a few percent of the number you agreed to. The finished work carries our written workmanship warranty, and the full range of brand options, from KraftMaid to Cambria, gets priced on its own lines.

DIY or Call Us?

You can safely do a few things yourself: pull the label off a board and write down the series and thickness, press on the floor near the shower to check for softness, tap tile to listen for hollow spots, and look at the wall on the other side of a wet wall for staining or bubbling paint. Those checks tell us a lot before we arrive. Where it goes wrong is once the tile comes off. Under that surface you’re dealing with waterproofing, substrate thickness, fastener schedules and a pan that has to slope and seal to avoid trapping water. Getting any one of those wrong means the new assembly fails the same way the old one did, and you pay twice. This isn’t a spring or an electrical panel, but water damage is patient and quiet; it will find the path you left open. Call (833) 842-1866 for a free estimate before you open the wall, and we’ll tell you exactly what we’d look at first.

FAQs

A single-story rear room addition with tall windows and a new patio

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new white vinyl privacy fence with a double gateNew painted shaker cabinets with an organized deep drawerA remodeled kitchen with a waterfall island and wood cabinetsA finished backyard cottage with a small covered porchA new roof with clean valleys and new flashingA new multi-panel patio door opening a kitchen to the patio

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch