







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Home Additions & ADU: The Santa Rosa Owner’s Guide
We install Schluter-compatible home additions and ADUs in Santa Rosa, and a typical addition runs $45,000 – $130,000 installed, with a full detached ADU at $90,000 – $220,000. New framing and slab work is scheduled, not same-day, so plan on a written price first and a start date we commit to in writing. Homeowners usually discover a Schluter failure the slow way: a hairline crack wandering across new floor tile, a grout line that keeps turning dark, or a soft spot at the shower edge of a new bathroom. By the time the tile moves, the waterproofing membrane underneath has already been compromised, and that membrane is what Schluter is known for.
Rowan Construction Group is an independent contractor and not affiliated with Schluter. We specify and install Schluter systems, we don’t manufacture or sell them.
Key Takeaways
- A failing Schluter assembly in an addition almost always means the substrate or the membrane bond failed, not the tile.
- Waterproofing details at wet-area thresholds are the most common weak point in a new ADU bathroom.
- We quote a flat written price with a written scope before any demo starts.
- Free second opinion on any written estimate you already have.
Which Schluter Models This Applies To

Schluter isn’t a single product, and matching the right part means naming the exact system. The two you’ll meet in an addition or ADU in Santa Rosa are DITRA (the uncoupling membrane for floor tile) and KERDI (the waterproofing sheet membrane for showers and wet areas). Schluter also makes KERDI-BOARD panels, DITRA-HEAT warming mats, and the DILEX and SCHIENE edge profiles.
Identify what you have before ordering anything. Pull the installation record or the tile contractor’s invoice; the system name and roll width are printed there. If there’s no paperwork, the membrane thickness and the printed fleece backing tell you the family, and a DITRA roll is measured by the square foot printed on the box. The OEM-versus-aftermarket question matters more here than with most trades: Schluter’s warranty conditions depend on using Schluter membranes with Schluter’s own thin-set and joint compounds. A generic uncoupling mat is cheaper by the roll, but the assembly loses Schluter’s system warranty. For an addition you plan to keep, use the matched system.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Home Additions & ADU Is Failing
The symptoms below point to the membrane or the substrate, not the tile face. Each one has a cause you can trace.
- Hairline cracks that follow the grout lines. The uncoupling membrane wasn’t bonded to the slab, so the new tile is moving with the floor instead of floating over it. Cracks usually show within the first heating and cooling season.
- Grout lines that turn dark and won’t clean. Moisture is wicking from below and the KERDI waterproofing layer is either lapped wrong or punctured. In a Santa Rosa ADU bathroom this shows up fastest at the curb and the shower pan edge.
- Hollow sound when you tap the tile. A thin-set layer that cured too dry or was mixed past its pot life leaves voids under the tile. Tap a few tiles with a coin; a dull thud instead of a sharp tick means a void.
- Lipped or uneven tile at a threshold. The installer skipped the KERDI-BAND at the transition, and the height difference is the membrane lifting, not the tile being set wrong.
- Musty smell in a new bathroom that won’t ventilate out. Water is trapped in the assembly because the waterproofing wasn’t tied to the drain flange. This one needs the floor opened before it damages the framing.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what it costs to correct a Schluter system in a Santa Rosa addition or ADU, installed, with the written scope and price before any tool is picked up.
| Scope | Installed Range |
|---|---|
| Remove and re-set a failed DITRA floor (per room) | $2,500 – $6,500 |
| Re-waterproof a shower with KERDI | $4,500 – $12,000 |
| Full ADU bathroom rebuild after membrane failure | $9,000 – $28,000 |
| Home addition, corrected and finished | $45,000 – $130,000 |
| ADU construction, complete | $90,000 – $220,000 |
| Garage conversion to living space | $30,000 – $80,000 |
The range moves with square footage, whether the slab needs grinding or leveling first, and how much framing is exposed once the failed tile comes up. Every quote is a flat price with a written scope and a written warranty. No change proceeds without a signed change order, so the number you agree to is the number you pay. Our crews are background-checked and uniformed, and a documented photo record of what we found and what we did comes with every visit.
DIY or Call Us?
You can safely do a few things. Look for the installation record, tap the tiles to map hollow spots, photograph the cracks and the grout discoloration, and check the shower for a soft curb. Don’t pull up tile or cut into a membrane to see what’s under it. A Schluter assembly is a bonded system, and opening it in the wrong place breaks the waterproofing further and can let water into a wall cavity or slab edge you didn’t know was wet. The repair then costs more than the original fix would have. Removing and re-setting a failed membrane is a substrate job with real tolerance limits, not a patch job.
Call (833) 842-1866 and we’ll come look, tell you what we found in plain terms, and hand you a written price. Estimates are free, and we’ll review a competitor’s written estimate line by line at no charge.
FAQs

A properly installed DITRA or KERDI assembly is rated for decades, and the honest failure point is installation: bad laps, dry thin-set, or a puncture. In Santa Rosa’s wet winters and dry summers, a bond that was already marginal will fail within the first few seasons. The membrane itself isn’t the weak link; the joint at the drain flange and the perimeter is.
Sometimes, but only if the failure is isolated. A single punctured spot in a shower might be patched with KERDI-FIX and a membrane patch, but widespread grout cracking across a floor means the whole uncoupling layer needs to come up. We’ll tell you which one you have after we look. Call (833) 842-1866 for a free estimate.
Re-waterproofing a shower runs three to five working days including cure time; a full ADU bathroom rebuild runs two to three weeks. Additions and ADUs are scheduled multi-month projects, and we give you the start date and the sequence in writing before we begin. Call (833) 842-1866 for a firm timeline and a flat price.
We specify the exact system from Schluter’s catalog by product name and roll size, ordered through Schluter’s distribution. We don’t keep parts in stock and we don’t carry them on a truck, so the part is ordered to match your assembly, not guessed at. We’ll show you the spec sheet before we order. Call (833) 842-1866 to start.
When your home addition or ADU is ready for a written price, call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. We also work with KraftMaid, Cambria, and Silestone on the finish side of these projects.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












