







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Home Additions & ADU: The Santa Rosa Owner’s Guide
We build Toto-compatible home additions and ADUs in Santa Rosa, and the installed range on these projects runs $45,000 – $130,000 for an addition and $90,000 – $220,000 for a full ADU, quoted as a flat written price with a written scope before anyone breaks ground. There is no same-day version of this work and we won’t pretend otherwise: a permitted addition in Santa Rosa takes months, and the number you sign is the number you’ll pay, held there by signed change orders under Clause 1 of the Haven Standard.
Owners usually arrive at this page sideways. They set out to spec a Toto fixture package for a new bathroom or kitchen wing – the washlet seat, the one-piece toilet, the under-counter fittings – and discover the real constraint isn’t the fixture at all. It’s the drain rough-in, the framed wall thickness, the venting path, and whether the addition they’re planning can carry that plumbing without tearing up what’s already finished. That discovery is where a build gets expensive if nobody priced it in writing first.
Key takeaways
- Addition: $45,000 – $130,000 in Santa Rosa. ADU: $90,000 – $220,000. Garage conversion: $30,000 – $80,000.
- Price is written before work starts – always. Change orders are signed before the change proceeds.
- Kitchen and bath fixture rough-ins (including Toto) get documented in the scope, not sorted out mid-frame.
- Every visit includes a photo record as a standard deliverable.
Which Toto Models This Applies To

This is a build page, so “compatibility” here means matching your Toto fixtures to the addition’s plumbing and framing – not swapping a cartridge. The Toto lines that come up most in our Santa Rosa scopes are the Aquia and Carlyle toilets, the Drake two-piece, the Nexus and Soiree one-pieces, and the Washlet seat family (S550e, C5, K300) that owners often want wired into a new bath. Each has a rough-in dimension and a supply location the framer and plumber need before the wall closes, and the Washlet needs a dedicated GFCI outlet within cord reach on the correct side – a detail that’s easy to miss and costly to add behind finished tile.
Identification is done from the label under the tank lid or on the back of the bowl, plus a tape measure: the distance from the finished back wall to the closet flange center is your rough-in, and Toto publishes that spec per model. On OEM versus aftermarket, our guidance for a fixture going into new construction is to spec the OEM Toto fill and flush valve assembly at install, since aftermarket internals are where most premature failures start. We also work with KraftMaid, Cambria, and Silestone when the same wing carries cabinets and counters. We are an independent service provider and not affiliated with Toto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Home Additions & ADU Is Failing
There’s no single “failed part” to watch for on an addition – what fails is the planning, and it shows up in predictable places. Here’s what we find when a Santa Rosa owner calls us to fix a build that went sideways.
- Plumbing rough-in doesn’t match the fixture. The toilet rough-in was framed at one dimension and the Toto model needs another, so the fixture sits proud or the flange is short. This surfaces the moment the toilet is set.
- No power where the washlet needs it. The GFCI outlet wasn’t placed within the Washlet’s cord range or on the correct side. Adding it after tile means cutting the finished wall.
- Vent path blocked or undersized. A toilet or fixture that gurgles, drains slowly, or smells comes down to venting designed after the fact instead of before the frame.
- Slab or subfloor not rated for the load path. An addition with a heavier fixture footprint needs the framing and floor structure sized for it, not inherited from the existing house.
- Permit scope missing the plumbing or electrical add. Fixtures and outlets added after the permit is pulled become a change order, and in Santa Rosa that can stall inspection.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For planning, here are the Santa Rosa ranges we quote on the trades touching a Toto-spec addition or ADU. These are installed prices with a written scope, not estimates to be tightened later.
| Scope | Santa Rosa range |
|---|---|
| Home addition (framed, finished) | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
| Garage conversion (to living space) | $30,000 – $80,000 |
| Bathroom remodel (fixture rough-in + finish) | $9,000 – $28,000 |
| Kitchen remodel | $14,000 – $45,000 |
What drives the range: foundation type and whether the site needs grading, the plumbing and electrical extent, permit fees, and finish level. Toto fixtures are line-itemed separately as material. The quote is a flat written price with a written warranty, backed by the 365-Day Done Right Promise – if it isn’t done right, we make it right. We also offer a free second opinion: bring a competitor’s written estimate and we’ll review it line by line at no charge.
DIY or Call Us?
What an owner can safely check: measure your Toto rough-in from the back wall to the flange center and compare it to the spec for your model, note which side the Washlet outlet needs to be on, and photograph any existing plumbing where the addition will tie in. That’s information-gathering, and it saves time on the first visit.
Where this goes wrong is the structural and rough-in work itself – moving a drain, framing a wall, setting a slab, and running the electrical for a fixture that needs it in the right place. Getting that wrong is expensive to undo, and it’s why we scope it before a tool comes out. Call (833) 842-1866 and we’ll put a written price in front of you.
FAQs

How long does a Toto-spec addition last? The fixture is the part that wears out first, not the build. A properly framed and permitted addition lasts decades, while the toilet’s internal fill and flush valve is the piece to expect to service; spec OEM internals at install. Call (833) 842-1866 for an exact quote – estimates are free.
Can the fixture scope be repaired or changed instead of rebuilt? Sometimes the plumbing rough-in can be adjusted within an existing frame, which is a smaller job than a rebuild. We’ll tell you honestly whether a change is enough or whether the frame has to move. Call (833) 842-1866 for a free second opinion.
How long does the build take? A garage conversion runs faster than a full ADU, and an addition sits in between. Timing depends on permits and site work, and we give you a schedule in the written scope – never a same-day promise. Call (833) 842-1866 to schedule your free estimate.
How do you source the Toto fixture and parts? As material line items in the written quote, sourced through our vetted brand network alongside KraftMaid, Cambria, and Silestone where the same scope calls for them. You see the number in writing before work starts. Call (833) 842-1866 – estimates are free.
Our technicians have up to 19 years of experience, crews are background-checked and uniformed, and a live person answers calls 24/7. We deliver a documented photo record on every visit as standard, and every crew member is verified before they arrive. Ready to put a number in writing? Call (833) 842-1866 to schedule your free estimate.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












