







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Toto Kitchen Remodeling: The Santa Rosa Owner’s Guide
Toto kitchen remodeling in Santa Rosa typically runs $14,000 to $45,000 installed, depending on whether we’re swapping a toilet, a washlet seat, a faucet, or a full fixture package with new cabinetry and countertops. Small kitchen remodels with Toto fixtures start around $9,000 to $20,000. We quote a flat written price before any work starts, and every visit gets a photo record.
Most Santa Rosa owners don’t come to us with a “remodel” on their mind. They come with a symptom. The washlet seat stopped heating on one side. The bidet wand retracts halfway and sticks. The fill valve runs for twenty seconds after the tank should be quiet. Or the kitchen faucet they bought alongside a Toto toilet five years ago now drips at the base of the spout every time the sprayer is used. One part failed, and now they’re pricing the whole picture.
Which Toto Models This Applies To

Toto’s residential lineup splits into a few lines Santa Rosa homeowners are most likely to own: the Drake, Eco Drake, Ultramax, Carlyle, and Aquia toilets; the Washlet line (S550e, C200, C5, K300); and Toto’s kitchen and lavatory faucets (the Oliveri and Soiree families). The Drake and Eco Drake use the G-Max flush valve and the TSU30A fill valve. The Ultramax uses the same fill valve but a different flapper geometry. Washlet seats are model-specific on the remote and the seat ring, but the water supply connection is a standard 7/8-inch T-adapter on nearly all of them.
Identify your model from the label inside the tank lid or the sticker on the back of the bowl. If the label is gone, measure the rough-in (10, 12, or 14 inches from the wall to the closet bolts) and photograph the fill valve and flapper. That photo and measurement let us match OEM Toto parts or a quality aftermarket equivalent (Fluidmaster, Korky) without a second trip. We source through our brand network, not a truck, so the model match is confirmed before anyone arrives. Rowan is an independent service provider and is not affiliated with Toto.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Toto Kitchen Remodeling Is Failing
- The washlet seat heats unevenly or not at all. The heating element or the thermistor in the seat ring has aged out. On a 2018 or earlier S550e, this usually shows up as a warm left side and a cold right side before the whole seat quits.
- The fill valve hisses or runs after the flush. The TSU30A seal has hardened. Santa Rosa’s water runs moderately hard (8 to 12 grains per gallon depending on your source), and that mineral load accelerates seal wear on any fill valve, Toto included.
- The bidet wand sticks or retracts slowly. Mineral buildup on the wand rail, not a motor failure in most cases. Cleanable, but if the motor gear has stripped, the seat ring needs replacement.
- The kitchen faucet drips at the spout or the base. The ceramic cartridge has worn. Toto faucets use a proprietary cartridge, so a generic replacement won’t seat properly.
- Water pools around the toilet base after a flush. The wax ring has failed, usually from a loose closet bolt or a shifting flange. This is the one symptom that can quietly rot subfloor if left alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

In Santa Rosa, replacing a Toto fill valve or flapper runs $140 to $260 installed, parts and labor. A Washlet seat replacement runs $600 to $1,400 installed, depending on the model. A Toto kitchen faucet cartridge swap is $180 to $340. If the failure has spread to the surrounding room, a cabinet installation is $4,000 to $13,000, countertops $2,000 to $6,500, and a backsplash $800 to $2,500. A full kitchen remodel with new Toto fixtures runs $14,000 to $45,000.
What drives the range: OEM versus aftermarket parts, whether the rough-in needs adjustment, and whether the surrounding tile or drywall has to come out to reach the connection. Our quote is a flat price with a written scope and a written warranty, and the 365-Day Done Right Promise covers the work. No change proceeds without a signed change order.
DIY or Call Us?
A few checks are safe for a homeowner. Lift the tank lid and look at the fill valve and flapper for visible mineral crust. Confirm the model from the tank label. Photograph the supply line connections before you touch anything. That’s it for the safe zone on most of this.
Where DIY goes wrong: Toto fill valves and flush valves are adjusted to a specific water level and refill ratio. A quarter-turn too far and the bowl won’t refill properly, or the valve runs continuously and quietly inflates your water bill. Washlet seats carry a low-voltage electrical connection, and messing with that without disconnecting power at the breaker is a genuine shock risk. Faucet cartridges on Toto fixtures are proprietary and easy to cross-thread. If you’re past the point of looking, call (833) 842-1866 – the diagnosis and the written quote are free.
FAQs

How long does a Toto fill valve last in Santa Rosa? Five to eight years on average, and often closer to five on Santa Rosa’s harder water sources. Seal wear, not the valve body, is the usual failure. Call (833) 842-1866 for an exact quote – estimates are free.
Can a Toto fill valve or flapper be repaired instead of replaced? Sometimes. A mineral-crusted flapper can often be cleaned and reseated. A hardened fill valve seal is usually a replacement, not a repair, because the seal material has failed. We’ll tell you which it is after we look. Call (833) 842-1866 to schedule a free estimate.
How long does a Toto part swap take? A fill valve or flapper is a 30-to-45-minute job. A Washlet seat replacement takes about an hour. A faucet cartridge swap runs 45 to 90 minutes. The whole visit gets a photo record.
How do you source the Toto part? We confirm the model from your label or measurements, match it to OEM Toto parts or a quality aftermarket equivalent, and source through our brand network – which also covers KraftMaid, Cambria, and Silestone if the project grows. The written quote names the part and the price before any work starts.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.
Ready to price it? Call (833) 842-1866 to schedule your free estimate. Our technicians have up to 19 years of experience, and you’ll have a flat written price before any work begins.












