A Rowan company - serving Santa Rosa, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Toto · Santa Rosa

Toto Bathroom Remodeling in Santa Rosa, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Santa Rosa
A wood double vanity with two mirrors after a bathroom remodel
A remodeled primary bathroom with a soaking tub and walk-in shower
A freestanding soaking tub in a remodeled primary bathroom
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Toto Bathroom Remodeling: The Santa Rosa Owner’s Guide

Toto bathroom remodeling in Santa Rosa typically runs $9,000 – $28,000 installed, depending on whether you’re replacing a failing fill valve in a single Drake or rebuilding a primary bath around a whole Toto suite (Neorest, Washlet, Ultramax). The work is plumbing and tile, planned, not emergency. What brings most owners here is a symptom they’ve been living with for weeks: a toilet that runs for 30 seconds after every flush, a slow fill that leaves the bowl at half level, a Washlet wand that stopped extending, or water pooling at the base after a shower.

Call (833) 842-1866

We install and service Toto-compatible bathroom remodels across Santa Rosa, from the 1920s bungalows on McDonald Avenue to the newer builds off Fountaingrove Parkway. Every visit includes a documented photo record, and every quote is a written price before anyone touches a flange.

Key Takeaways

  • Installed Toto bathroom remodels in Santa Rosa: $9,000 – $28,000, quoted in writing before work starts.
  • Most single-fixture failures trace to fill valves, flappers, or supply lines – not the ceramic.
  • Toto uses model-specific parts; a generic flapper will fit but fill at the wrong rate and run.
  • We’re an independent contractor, not affiliated with Toto. We source OEM and quality aftermarket parts by model number.
  • Free second opinion on any written Toto estimate you’ve already been given.

Which Toto Models This Applies To

A tile setter installing wall tile in a shower

Toto’s residential line splits into a few families, and the part you need depends entirely on which one you own. The Drake (CST743) and Eco Drake (CST744) are two-piece toilets with a G-Max or E-Max flush valve – the 3-inch flapper and fill valve differ between the two, and getting the wrong one is why so many Santa Rosa installs whistle or run. The Ultramax and Ultramax II (MS604) are one-piece with an integrated fill tower. The Neorest and Washlet lines add electronics – seat, wand, pump – which fail on a different schedule than the porcelain does.

Find the model on the label inside the tank lid or on the back of the bowl near the seat hinge. It’s usually a five-to-seven-character code (CST743E, MS604124CEFG). Measure the tank width and the distance from the wall to the flange bolt centers – 10-inch, 12-inch, and 14-inch rough-ins all exist, and a Santa Rosa plumber quoting a full replacement needs that number.

OEM vs aftermarket: Toto’s own fill valves and flappers are built to the exact flow rate its bowls are designed around. A generic Fluidmaster works, but on Eco Drake models the 1.28-gallon flush depends on a matched fill, and the wrong aftermarket part costs you 20 to 40 extra gallons a day. On Washlet electronics, OEM only – we don’t source third-party control boards.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Toto Bathroom Remodeling Is Failing

Owners usually discover the problem in the middle of a season change, when water pressure shifts and a marginal part gives out. Here’s what to watch for, and what it usually means.

  • The toilet runs for 20 to 60 seconds after every flush. That’s a flapper that no longer seals on the seat – the rubber hardens and skews with age, and the tank leaks down until the fill valve kicks on. On a Toto with a 3-inch flush valve, a 2-inch generic flapper won’t seal right and the run never stops.
  • The bowl stays at half level after flushing. The fill valve is restricted or the refill tube isn’t clipped into the overflow. On Eco models this often traces to a mis-installed aftermarket valve that fills the tank but not the bowl.
  • A whistling or hissing from the tank that never fully stops. The fill valve’s internal seal is worn. In Santa Rosa’s harder water, mineral buildup accelerates that wear, especially on homes fed from older galvanized service lines.
  • The Washlet wand won’t extend, or the seat heat won’t turn on. That’s the electronic control or pump on a Neorest or Washlet – a part you replace by panel, not by feel. It’s also where a novice DIY attempt voids the electronic warranty.
  • Water at the base of the toilet after a flush or shower. A failed wax ring, a cracked flange, or a failed shower pan membrane. In Santa Rosa’s older homes, a 1950s cast-iron closet flange has usually cracked by now, and the wax ring is doing 100% of the sealing work.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A galley kitchen opened up to the dining room with a new peninsula

For Santa Rosa, the numbers below are market ranges we see on real jobs, not aspirational. Each one is a written flat price with a written scope – parts, labor, haul-away, and the warranty line all named on the page before work starts.

Scope Installed range
Bathroom remodel, full (Toto fixtures, tile, waterproofing) $9,000 – $28,000
Small bathroom remodel (single-fixture refresh, Toto toilet) $5,000 – $12,000
Tub-to-shower conversion $3,500 – $10,000
Walk-in shower installation $4,500 – $12,000
Bathroom vanity installation $800 – $3,000

What drives the number: whether the flange is sound or needs rebuilding, whether the subfloor under the toilet has soft spots (common in Santa Rosa homes with older plumbing), the tile scope, and whether you’re staying with existing fixtures or moving to a new Toto suite. Parts-plus-labor is transparent on the quote – we list the fill valve or flapper separately from the labor, so you see what the part costs.

Workmanship is covered by our 365-Day Done Right Promise: if it’s not done right, we make it right. Under Clause 1 of the Haven Standard, the price is written before anyone picks up a tool. We’re independent – not affiliated with Toto.

DIY or Call Us?

An owner can safely check three things: the tank label for the model number, whether the flapper is visibly warped or mineral-crusted, and whether the water line behind the toilet has a shutoff that actually turns. That’s it.

Where DIY goes wrong on Toto specifically: replacing a fill valve on a 1.28-gallon Eco model without matching the flow rate leaves you with a toilet that flushes but doesn’t refill the bowl, and you’ll be back in the same spot in a week. Replacing electronics on a Washlet or Neorest involves a control panel and water supply – a wrong connection can leak behind the wall. And anything involving the wax ring, flange, or shower membrane is a water-damage problem waiting to happen: once water gets under the tile, you’re not replacing a $12 part, you’re replacing the substrate.

Call (833) 842-1866 for a free estimate. We’ll tell you what we found, show you the photo record, and write the price before we start.

FAQs

A remodeled family room with new windows and a window seat

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front yard fence with a matching gateA new paver pool deckAn open kitchen and dining area after a remodelA second-story addition that matches the existing rooflineA newly finished roof with a ridge vent and step flashingA new front entry door with glass sidelights

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Rowan in Santa Rosa

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Santa Rosa team

A local vetted partner works across Santa Rosa and the towns around it, to the same written standard as every Rowan job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (833) 842-1866
Local Service Coverage

Request a Free Estimate in Santa Rosa

Tell us what you need - Rowan Construction Group Santa Rosa responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch