







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Bathroom Remodeling: The Santa Rosa Owner’s Guide
A Delta bathroom remodel in Santa Rosa typically runs $9,000 to $28,000, and our technicians have up to 19 years of experience installing Delta-compatible fixtures, valves, and trim kits to current specs. We’re an independent service provider and not affiliated with Delta. Most owners don’t call us because they were browsing showrooms. They call because a cartridge started weeping behind a hot handle in a 1990s ranch off Montgomery Village, or a shower mixer in a Bennett Valley home stopped holding temperature, or a toilet fill valve in a Fountain Grove bathroom kept running every two hours. The failed part is usually the first domino. What happens after it depends on what the wall and floor look like once the trim is off.
Which Delta Models This Applies To

Delta’s single-handle shower and tub valves fall into two broad families you’ll run into in Santa Rosa homes: the older Monitor series with round chrome escutcheons (often from the 1980s and 1990s), and the current MultiChoice Universal rough-in, introduced in 2006, which lets a single valve body accept 13S, 14S, 17S, or 17T series trim. If your shower escutcheon has one handle and the trim ring is plastic-backed with a spring-loaded temperature limiter behind the handle, you’re almost certainly on MultiChoice. If it’s a two-handle setup with separate hot and cold stems, you’re on an older stem-valve design and parts are still available, though the seat-and-spring wear pattern is different from a cartridge valve.
Delta’s model number lives on a sticker inside the escutcheon plate or stamped on the cartridge body itself – RP-numbered cartridges (RP1991, RP46074, RP19804) are the interchangeable units. OEM Delta cartridges come with a full warranty from the manufacturer; quality aftermarket equivalents from brands like Danco or BrassCraft cost less but have a shorter life in California’s hard water. We source OEM when the valve body is staying, aftermarket only when the customer asks for a price-reduced option and understands the tradeoff.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Bathroom Remodeling Is Failing
- The shower handle feels loose or wobbly. The splines on the cartridge stem are wearing down. Left alone, the handle eventually spins without engaging and the valve can’t be shut off cleanly.
- Water drips from the tub spout after shutoff. A worn rubber seat inside the cartridge isn’t seating against the valve body. A slow drip wastes 50 to 200 gallons a month, which shows up on your Santa Rosa water bill before it shows up on the wall.
- Temperature swings when another fixture runs. The pressure-balance spool inside the cartridge is seizing. In a Santa Rosa home with a 1990s valve body, this is often the first sign of a failing cartridge, not the valve itself.
- Mineral crust around the escutcheon or on the spout threads. Santa Rosa’s water runs moderately hard (typically 6 to 10 grains per gallon depending on which district supplies the address). That mineral load chews through cartridge rubber faster than in softer-water cities.
- A musty smell under the vanity that wasn’t there last spring. A cartridge leaking slowly behind the wall feeds moisture into the substrate. By the time you smell it, the drywall has been wet for weeks.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

A failed-part replacement in a Delta bathroom usually lands inside these ranges. What drives the number is whether the valve body stays, the wall is opened, or the floor is touched.
- Cartridge replacement only: $180 to $340 in Santa Rosa (parts and labor)
- Full trim kit replacement (handle, escutcheon, spout): $280 to $550
- Valve body replacement behind the wall: $650 to $1,400 including drywall patch and re-tile
- Tub-to-shower conversion: $3,500 to $10,000
- Walk-in shower installation: $4,500 to $12,000
- Small bathroom remodel: $5,000 to $12,000
- Full bathroom remodel: $9,000 to $28,000
Every quote is a flat written price with a written scope before work starts, under Clause 1 of The Haven Standard. No change proceeds without a signed change order. A written warranty and a documented photo record go with every visit. We also carry KraftMaid, Cambria, and Silestone for the cabinet and counter side of a bathroom project when the remodel scope grows.
DIY or Call Us?
If the only symptom is a dripping spout and the valve is a MultiChoice, a homeowner can swap the cartridge. Delta publishes the procedure and the part is available at any Santa Rosa hardware store. But if the valve body is 20 or more years old, the shutoff behind the wall may not close fully, water has to be cut at the curb, and the cartridge retainer can snap. If the leak has already reached the substrate, the repair becomes a tile-and-framing problem, and that’s where remodels begin. Our crews are background-checked, uniformed, and every visit includes a documented photo record as a standard deliverable. Call (833) 842-1866 for a free estimate and we’ll put the number in writing before anyone picks up a wrench.
FAQs

Most Delta cartridges last 8 to 12 years in Santa Rosa, less if the address is on a harder-water supply or the shower runs daily for two or more people. Visible wear often shows up at year 7. Call (833) 842-1866 for an exact quote – estimates are free.
No. Delta cartridges aren’t serviceable beyond cleaning; once the rubber seats and the pressure-balance spool wear, replacement is the only fix. Cleaning removes surface mineral but doesn’t restore sealing. Call (833) 842-1866 to schedule a free estimate on parts and labor.
A single cartridge replacement runs 45 to 90 minutes once the water is shut off; a full trim kit plus cartridge takes about 2 hours. If the wall has to be opened to reach a seized valve body, plan a full day, plus drywall and tile repair. Call (833) 842-1866 for a written time and price before we start.
We source OEM Delta cartridges and trim directly through authorized supply channels and match the RP-number to the valve body before the crew arrives, so nothing gets pulled apart twice. Aftermarket equivalents are quoted only when the customer asks for the lower option. Call (833) 842-1866 for a free estimate on your Santa Rosa Delta repair or remodel.
Call Rowan Construction Group Santa Rosa at (833) 842-1866 for a free estimate. We put the price in writing before any work begins, back the finished work with the 365-Day Done Right Promise, and hand you a documented photo record when the crew leaves.
Written by the team at Rowan Construction Group Santa Rosa, serving Santa Rosa and nearby areas.












